[alsa-devel] [PATCH] ASoC: wm8904: fix runtime warning

[Bo Shen]

Hi Lars-Peter Clausen,

On 01/13/2015 04:56 PM, Lars-Peter Clausen wrote:
> On 01/13/2015 06:36 AM, Bo Shen wrote:
>> Hi Lars-Perter Clausen,
>>
>> On 01/12/2015 05:30 PM, Lars-Peter Clausen wrote:
>>> On 01/12/2015 04:32 AM, Bo Shen wrote:
>>> [...]
>>>>>> diff --git a/sound/soc/codecs/wm8904.c b/sound/soc/codecs/wm8904.c
>>>>>> index 4d2d2b1..38582d7 100644
>>>>>> --- a/sound/soc/codecs/wm8904.c
>>>>>> +++ b/sound/soc/codecs/wm8904.c
>>>>>> @@ -1076,10 +1076,10 @@ static const struct snd_soc_dapm_route
>>>>>> adc_intercon[] = {
>>>>>>       { "Right Capture PGA", NULL, "Right Capture Mux" },
>>>>>>       { "Right Capture PGA", NULL, "Right Capture Inverting Mux" },
>>>>>>
>>>>>> -    { "AIFOUTL", "Left",  "ADCL" },
>>>>>> -    { "AIFOUTL", "Right", "ADCR" },
>>>>>> -    { "AIFOUTR", "Left",  "ADCL" },
>>>>>> -    { "AIFOUTR", "Right", "ADCR" },
>>>>>> +    { "AIFOUTL", NULL, "ADCL" },
>>>>>> +    { "AIFOUTL", NULL, "ADCR" },
>>>>>> +    { "AIFOUTR", NULL, "ADCL" },
>>>>>> +    { "AIFOUTR", NULL, "ADCR" },
>>>>>
>>>>> Is this the right fix here? I am not super familiar with the
>>>>> driver but it appears to contain an "AIFOUTL Mux" control which
>>>>> is not connected to anything. Looks like maybe this is a mistake
>>>>> the mux is indeded to be included in the path? Feels like we
>>>>> should either remove the control as well or hook it into the
>>>>> path.
>>>>
>>>> Thank for your information.
>>>> I think here it should correct the path name as
>>>> --->8---
>>>> { "AIFOUTL Mux", "Left",  "ADCL" },
>>>> { "AIFOUTL Mux", "Right", "ADCR" },
>>>> { "AIFOUTR Mux", "Left",  "ADCL" },
>>>> { "AIFOUTR Mux", "Right", "ADCR" },
>>>> ---8<---
>>>>
>>>> Thanks again. I will send out the new version.
>>>
>>> Your probably also need to connect the mux to the output pins.
>>
>> Thanks for you information, after check the datasheet, I still don't know
>> which the mux should connect to which output pins.
>
> AIFOUTL Mux to AIFOUTL
> AIFOUTR Mux to AIFOUTR

Thanks. I will send new version patch for review.

Best Regards,
Bo Shen