[alsa-devel] [PATCHv3 2/2] ALSA: log emu8000 DRAM size at level INFO

[David Flater]

Applicable after PATCHv3 1/2:

Detected sound font memory goes unreported unless the kernel was built with
ALSA debugging enabled.  Elevate that to a pr_info.

Signed-off-by: David Flater <dave at flaterco.com>
---
History:
2015-01-11  v3: In response to feedback from Takashi Iwai,
              Patch 1: Repeat code to avoid goto middle of loop.
              Patch 2: Use pr_info not printk.
            Retested on CT4390 (4 MiB) and CT4380 (512 KiB).
2015-01-09  v2: In response to feedback from Takashi Iwai,
               1. Optimize for diff size.
                 1a. Use goto to avoid indenting and repeating code.
                 1b. Jettison new debugging printouts.
               2. Split printk into second patch.
            Retested on CT4390 (4 MiB) and CT4380 (512 KiB).
2015-01-08  v1 patch sent to LKML, Alsa Devel and maintainers.  Tested on
            unexpanded CT4390 (4 MiB), CT4520 (512 KiB), and CT4380 (512
            KiB).

 sound/isa/sb/emu8000.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/isa/sb/emu8000.c b/sound/isa/sb/emu8000.c
index d25e384..96e9d94 100644
--- a/sound/isa/sb/emu8000.c
+++ b/sound/isa/sb/emu8000.c
@@ -453,7 +453,7 @@ skip_detect:
 	snd_emu8000_dma_chan(emu, 0, EMU8000_RAM_CLOSE);
 	snd_emu8000_dma_chan(emu, 1, EMU8000_RAM_CLOSE);
 
-	snd_printdd("EMU8000 [0x%lx]: %d Kb on-board memory detected\n",
+	pr_info("EMU8000 [0x%lx]: %d KiB on-board DRAM detected\n",
 		    emu->port1, size/1024);
 
 	emu->mem_size = size;
-- 
1.8.4