[alsa-devel] [PATCH 0/20] ASoC: rsnd: add Synchronous SRC and U/O error salvage support

[Kuninori Morimoto]

Hi Mark.

> Kuninori Morimoto (20):
>        1. ASoC: rsnd: add .fallback callback
>        2. ASoC: rsnd: add callback status check method
>        3. ASoC: rsnd: rsnd_src_ssiu_stop() stops SSIU compulsorily
>        4. ASoC: rsnd: tidyup PIO/DMA mode settings method
>        5. ASoC: rsnd: tidyup SSI interrupt enable/disable method
>        6. ASoC: rsnd: care SSIWSR register in rsnd_ssi_hw_start()
>        7. ASoC: rsnd: clear status register when HW start
>        8. ASoC: rsnd: synchronize SSI start/stop sequence between PIO/DMA mode
>        9. ASoC: rsnd: show master clock rate when ADG probe
>       10. ASoC: rsnd: move snd_kcontrol_new fucntions to core.c
>       11. ASoC: rsnd: tidyup rsnd_io_to_runtime() macro
>       12. ASoC: rsnd: use rsnd_src_convert_rate() once on rsnd_src_set_convert_rate_gen2()
>       13. ASoC: rsnd: initialize SRC on rsnd_src_init()
>       14. ASoC: rsnd: set SRC_ROUTE_MODE0 on each rsnd_src_set_convert_rate()
>       15. ASoC: rsnd: share SSI starting method between PIO/DMA mode
>       16. ASoC: rsnd: remove un-necessary parameter from rsnd_src_start/stop()
>       17. ASoC: rsnd: add Synchronous SRC mode
>       18. ASoC: rsnd: add salvage support for under/over flow error on SSI
>       19. ASoC: rsnd: add salvage support for under/over flow error on SRC
>       20. ASoC: rsnd: rename SSI function name of PIO

Now, 17) and 19) are not accepted, but the reason of 19) was bacause it is based on 17)
I will resend 19) patch which is in-depend from 17)

Best regards
---
Kuninori Morimoto