[alsa-devel] [PATCH] fm801: move to pcim_* and devm_* functions

Andy Shevchenko andy.shevchenko at gmail.com
Wed Jan 7 14:27:35 CET 2015


On Wed, Jan 7, 2015 at 3:12 PM, Takashi Iwai <tiwai at suse.de> wrote:
> At Wed, 7 Jan 2015 14:20:26 +0200,
> Andy Shevchenko wrote:
>>
>> On Wed, Jan 7, 2015 at 1:27 PM, Takashi Iwai <tiwai at suse.de> wrote:
>> > At Wed, 7 Jan 2015 12:54:40 +0200,
>> > Andy Shevchenko wrote:
>> >>
>> >> On Wed, Jan 7, 2015 at 9:11 AM, Takashi Iwai <tiwai at suse.de> wrote:
>> >> > At Wed,  7 Jan 2015 01:40:17 +0200,
>> >> > Andy Shevchenko wrote:
>> >> >>
>> >> >> The managed functions allow to get ->probe() and ->remove() simplier.
>> >> >> This patch converts code to use managed functions.
>> >> >
>> >> > This doesn't work well because of the order of release calls in
>> >> > device_release().  devres_release_all() is called at first before
>> >> > anything else.  Thus the card's free callback would be called after
>> >> > it, and snd_fm801_free() touches the hardware before disabling.
>> >> >
>> >>
>> >> Hmm… I didn't get what make those calls. Sound core? The driver is a
>> >> normal PCI driver, so resources will be freed *after* ->remove() of
>> >> driver was called.
>> >> Please, elaborate.
>> >
>> > Ah, OK, this seems working, as this is the managed *pci* device that
>> > is a parent of the card device, thus it shall be released after the
>> > children.
>> >
>> > But any reason not to use pcim_iomap_regions_request_all()?
>>
>> Yes. I was doubt to put a comment about this.
>
> Well, pcim_iomap_regions_request_all() can just request regions
> without actually iomapping via passing 0 to mask.  But, now looking at
> the code again, I couldn't find the place releasing the non-mmio
> regions.  Hmm... it might be a leak?

It's in snd_fm801_free().
pci_release_regions(chip->pci);

>
>> So, the initial idea is
>> to move to MMIO instead of IO access. That's why you may see previous
>> patch about fm801_{read,write}w() macros.
>> I would like to do that later.
>
> Yeah, of course, rewriting to MMIO would be nicer.  I guess you're
> testing with the real hardware, so I'm for this rewrite.
>
>
> thanks,
>
> Takashi
>
>>
>> >
>> >
>> > thanks,
>> >
>> > Takashi
>> >
>> >>
>> >> >
>> >> > Takashi
>> >> >
>> >> >> While here remove the dead code and fix the value printed in error
>> >> >> message.
>> >> >>
>> >> >> Signed-off-by: Andy Shevchenko <andy.shevchenko at gmail.com>
>> >> >> ---
>> >> >>  sound/pci/fm801.c | 29 +++++++----------------------
>> >> >>  1 file changed, 7 insertions(+), 22 deletions(-)
>> >> >>
>> >> >> diff --git a/sound/pci/fm801.c b/sound/pci/fm801.c
>> >> >> index dcda3c1..2708500 100644
>> >> >> --- a/sound/pci/fm801.c
>> >> >> +++ b/sound/pci/fm801.c
>> >> >> @@ -1178,12 +1178,8 @@ static int snd_fm801_free(struct fm801 *chip)
>> >> >>               v4l2_device_unregister(&chip->v4l2_dev);
>> >> >>       }
>> >> >>  #endif
>> >> >> -     if (chip->irq >= 0)
>> >> >> -             free_irq(chip->irq, chip);
>> >> >>       pci_release_regions(chip->pci);
>> >> >> -     pci_disable_device(chip->pci);
>> >> >>
>> >> >> -     kfree(chip);
>> >> >>       return 0;
>> >> >>  }
>> >> >>
>> >> >> @@ -1206,28 +1202,23 @@ static int snd_fm801_create(struct snd_card *card,
>> >> >>       };
>> >> >>
>> >> >>       *rchip = NULL;
>> >> >> -     if ((err = pci_enable_device(pci)) < 0)
>> >> >> +     if ((err = pcim_enable_device(pci)) < 0)
>> >> >>               return err;
>> >> >> -     chip = kzalloc(sizeof(*chip), GFP_KERNEL);
>> >> >> -     if (chip == NULL) {
>> >> >> -             pci_disable_device(pci);
>> >> >> +     chip = devm_kzalloc(&pci->dev, sizeof(*chip), GFP_KERNEL);
>> >> >> +     if (chip == NULL)
>> >> >>               return -ENOMEM;
>> >> >> -     }
>> >> >>       spin_lock_init(&chip->reg_lock);
>> >> >>       chip->card = card;
>> >> >>       chip->pci = pci;
>> >> >>       chip->irq = -1;
>> >> >>       chip->tea575x_tuner = tea575x_tuner;
>> >> >> -     if ((err = pci_request_regions(pci, "FM801")) < 0) {
>> >> >> -             kfree(chip);
>> >> >> -             pci_disable_device(pci);
>> >> >> +     if ((err = pci_request_regions(pci, "FM801")) < 0)
>> >> >>               return err;
>> >> >> -     }
>> >> >>       chip->port = pci_resource_start(pci, 0);
>> >> >>       if ((tea575x_tuner & TUNER_ONLY) == 0) {
>> >> >> -             if (request_irq(pci->irq, snd_fm801_interrupt, IRQF_SHARED,
>> >> >> -                             KBUILD_MODNAME, chip)) {
>> >> >> -                     dev_err(card->dev, "unable to grab IRQ %d\n", chip->irq);
>> >> >> +             if (devm_request_irq(&pci->dev, pci->irq, snd_fm801_interrupt,
>> >> >> +                             IRQF_SHARED, KBUILD_MODNAME, chip)) {
>> >> >> +                     dev_err(card->dev, "unable to grab IRQ %d\n", pci->irq);
>> >> >>                       snd_fm801_free(chip);
>> >> >>                       return -EBUSY;
>> >> >>               }
>> >> >> @@ -1242,12 +1233,6 @@ static int snd_fm801_create(struct snd_card *card,
>> >> >>       /* init might set tuner access method */
>> >> >>       tea575x_tuner = chip->tea575x_tuner;
>> >> >>
>> >> >> -     if (chip->irq >= 0 && (tea575x_tuner & TUNER_ONLY)) {
>> >> >> -             pci_clear_master(pci);
>> >> >> -             free_irq(chip->irq, chip);
>> >> >> -             chip->irq = -1;
>> >> >> -     }
>> >> >> -
>> >> >>       if ((err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops)) < 0) {
>> >> >>               snd_fm801_free(chip);
>> >> >>               return err;
>> >> >> --
>> >> >> 1.8.3.101.g727a46b
>> >> >>
>> >>
>> >>
>> >>
>> >> --
>> >> With Best Regards,
>> >> Andy Shevchenko
>> >>
>>
>>
>>
>> --
>> With Best Regards,
>> Andy Shevchenko
>>



-- 
With Best Regards,
Andy Shevchenko


More information about the Alsa-devel mailing list