[alsa-devel] Issues w/ Creative Labs [SB X-Fi Xtreme Audio] CA0110-IBG
Takashi Iwai
tiwai at suse.de
Wed Feb 25 07:28:32 CET 2015
[Please don't top-post]
At Wed, 25 Feb 2015 04:37:18 +0000 (UTC),
Alnie wrote:
>
> I've just submitted this...
> http://www.alsa-project.org/db/?f=b49e28f0fdd3120b3c222b4ff377c3e290baf497
>
> Although, I do agree the problem seems deeper than the driver. Could be something unique to my laptop/hardware. Although, as I've mentioned, the card has been working fine in Win 7. I double checked my BIOS and it's at latest version. Based on what I've seen, I feel a bit hopeless trying to reach out to Creative Labs about this. Do you think that would be a worthwhile endeavor?
What kind of card is it, BTW? When looking at your original post, I
noticed that the card provides its own PCI bridge and there is no
kernel driver binding to it.
05:00.0 PCI bridge: Creative Labs [SB X-Fi Xtreme Audio] CA0110-IBG PCI to PCIe Bridge (prog-if 00 [Normal decode])
Physical Slot: 3
Flags: bus master, fast devsel, latency 0
Bus: primary=05, secondary=06, subordinate=0c, sec-latency=36
Memory behind bridge: f4300000-f43fffff
Capabilities: [50] Power Management version 3
Capabilities: [60] MSI: Enable- Count=1/16 Maskable- 64bit+
Capabilities: [80] Subsystem: Creative Labs Device 0040
Capabilities: [90] Express PCI-Express to PCI/PCI-X Bridge, MSI 00
Capabilities: [100] Advanced Error Reporting
06:00.0 Audio device: Creative Labs [SB X-Fi Xtreme Audio] CA0110-IBG
Subsystem: Creative Labs SB1040
Flags: bus master, fast Back2Back, medium devsel, latency 32, IRQ 19
Memory at f4300000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [dc] Power Management version 3
Kernel driver in use: snd_hda_intel
Takashi
More information about the Alsa-devel
mailing list