[alsa-devel] Issues w/ Creative Labs [SB X-Fi Xtreme Audio] CA0110-IBG
Alnie
alnieb at yahoo.com
Sun Feb 15 22:33:55 CET 2015
I am having a problem getting this card working in Mint 17.1 (64bit). I
have found reports from others around the net claiming to have this card
working (around 2010/2011 mostly). I also tried xubuntu with the same
results. On a fresh distro when I install the card, it is recognized but
isn't associated with any driver, if I install the 3.16 kernel or the
alsa-daily repo it becomes associated with a driver but I get the
following errors from dmesg...
[ 3.713183] snd_hda_intel 0000:06:00.0: Probing card using HDA DKMS, version 0.201502151246~ubuntu14.04.1
[ 3.720010] snd_hda_intel 0000:06:00.0: CORB reset timeout#1, CORBRP = 0
[ 4.744035] snd_hda_intel 0000:06:00.0: Codec #1 probe error; disabling it...
[ 4.748009] snd_hda_intel 0000:06:00.0: CORB reset timeout#1, CORBRP = 0
[ 9.772075] snd_hda_intel 0000:06:00.0: no AFG or MFG node found
[ 9.772100] snd_hda_intel 0000:06:00.0: no codecs initialized
and here is my lspci output...
05:00.0 PCI bridge: Creative Labs [SB X-Fi Xtreme Audio] CA0110-IBG PCI to PCIe Bridge (prog-if 00 [Normal decode])
Physical Slot: 3
Flags: bus master, fast devsel, latency 0
Bus: primary=05, secondary=06, subordinate=0c, sec-latency=36
Memory behind bridge: f4300000-f43fffff
Capabilities: [50] Power Management version 3
Capabilities: [60] MSI: Enable- Count=1/16 Maskable- 64bit+
Capabilities: [80] Subsystem: Creative Labs Device 0040
Capabilities: [90] Express PCI-Express to PCI/PCI-X Bridge, MSI 00
Capabilities: [100] Advanced Error Reporting
06:00.0 Audio device: Creative Labs [SB X-Fi Xtreme Audio] CA0110-IBG
Subsystem: Creative Labs SB1040
Flags: bus master, fast Back2Back, medium devsel, latency 32, IRQ 19
Memory at f4300000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [dc] Power Management version 3
Kernel driver in use: snd_hda_intel
thank you for any advice & feedback on this.
More information about the Alsa-devel
mailing list