[alsa-devel] [PATCH v2] ALSA: line6: Improve line6_read/write_data() interfaces
Chris Rorvick
chris at rorvick.com
Wed Feb 11 14:28:18 CET 2015
On Feb 11, 2015 7:06 AM, "Takashi Iwai" <tiwai at suse.de> wrote:
>
> At Wed, 11 Feb 2015 06:03:31 -0600,
> Chris Rorvick wrote:
> >
> > The address cannot be negative so make it unsigned. Also, an unsigned
> > int is always sufficient for the length, so no need to overdo it with a
> > size_t. Finally, add in range checks to see if the values passed in
> > actually fit where they are used.
> >
> > Signed-off-by: Chris Rorvick <chris at rorvick.com>
> > ---
> > This was dropped from an earlier series ("Cleanup reads/writes to Line 6
> > device memory".) This version leaves the arguements wide (within
reason)
> > and does range checking.
> >
> > Regards,
> >
> > Chris
> >
> > sound/usb/line6/driver.c | 14 ++++++++++----
> > sound/usb/line6/driver.h | 8 ++++----
> > 2 files changed, 14 insertions(+), 8 deletions(-)
> >
> > diff --git a/sound/usb/line6/driver.c b/sound/usb/line6/driver.c
> > index 99b63a7..4f82b57 100644
> > --- a/sound/usb/line6/driver.c
> > +++ b/sound/usb/line6/driver.c
> > @@ -302,14 +302,17 @@ static void line6_data_received(struct urb *urb)
> > /*
> > Read data from device.
> > */
> > -int line6_read_data(struct usb_line6 *line6, int address, void *data,
> > - size_t datalen)
> > +int line6_read_data(struct usb_line6 *line6, unsigned address, void
*data,
> > + unsigned datalen)
> > {
> > struct usb_device *usbdev = line6->usbdev;
> > int ret;
> > unsigned char len;
> > unsigned count;
> >
> > + if (address > 0xffff || datalen > 0xff)
> > + return EINVAL;
>
> -EINVAL.
Stupid, sorry. This isn't very important, I can just let this die. :-)
>
> Takashi
>
> > /* query the serial number: */
> > ret = usb_control_msg(usbdev, usb_sndctrlpipe(usbdev, 0), 0x67,
> > USB_TYPE_VENDOR | USB_RECIP_DEVICE |
USB_DIR_OUT,
> > @@ -370,14 +373,17 @@ EXPORT_SYMBOL_GPL(line6_read_data);
> > /*
> > Write data to device.
> > */
> > -int line6_write_data(struct usb_line6 *line6, int address, void *data,
> > - size_t datalen)
> > +int line6_write_data(struct usb_line6 *line6, unsigned address, void
*data,
> > + unsigned datalen)
> > {
> > struct usb_device *usbdev = line6->usbdev;
> > int ret;
> > unsigned char status;
> > int count;
> >
> > + if (address > 0xffff || datalen > 0xffff)
> > + return EINVAL;
> > +
> > ret = usb_control_msg(usbdev, usb_sndctrlpipe(usbdev, 0), 0x67,
> > USB_TYPE_VENDOR | USB_RECIP_DEVICE |
USB_DIR_OUT,
> > 0x0022, address, data, datalen,
> > diff --git a/sound/usb/line6/driver.h b/sound/usb/line6/driver.h
> > index 5d20294..7da643e 100644
> > --- a/sound/usb/line6/driver.h
> > +++ b/sound/usb/line6/driver.h
> > @@ -147,8 +147,8 @@ struct usb_line6 {
> >
> > extern char *line6_alloc_sysex_buffer(struct usb_line6 *line6, int
code1,
> > int code2, int size);
> > -extern int line6_read_data(struct usb_line6 *line6, int address, void
*data,
> > - size_t datalen);
> > +extern int line6_read_data(struct usb_line6 *line6, unsigned address,
> > + void *data, unsigned datalen);
> > extern int line6_read_serial_number(struct usb_line6 *line6,
> > u32 *serial_number);
> > extern int line6_send_raw_message_async(struct usb_line6 *line6,
> > @@ -161,8 +161,8 @@ extern void line6_start_timer(struct timer_list
*timer, unsigned long msecs,
> > void (*function)(unsigned long),
> > unsigned long data);
> > extern int line6_version_request_async(struct usb_line6 *line6);
> > -extern int line6_write_data(struct usb_line6 *line6, int address, void
*data,
> > - size_t datalen);
> > +extern int line6_write_data(struct usb_line6 *line6, unsigned address,
> > + void *data, unsigned datalen);
> >
> > int line6_probe(struct usb_interface *interface,
> > const struct usb_device_id *id,
> > --
> > 2.1.0
> >
More information about the Alsa-devel
mailing list