[alsa-devel] [RFC PATCH 0/2] ALSA: hda - DP MST audio for Jack support

[Libin Yang]

Hi Takashi,

On 11/09/2015 11:15 PM, Takashi Iwai wrote:
> On Mon, 09 Nov 2015 16:00:01 +0100,
> Yang, Libin wrote:
>>
>> Hi Takashi,
>>
>>> -----Original Message-----
>>> From: Takashi Iwai [mailto:tiwai at suse.de]
>>> Sent: Monday, November 09, 2015 3:59 PM
>>> To: Libin Yang
>>> Cc: alsa-devel at alsa-project.org; mengdong.lin at linux.intel.com; Yang,
>>> Libin
>>> Subject: Re: [alsa-devel] [RFC PATCH 0/2] ALSA: hda - DP MST audio for
>>> Jack support
>>>
>>> On Wed, 04 Nov 2015 07:23:14 +0100,
>>> Libin Yang wrote:
>>>>
>>>>
>>>> On 11/04/2015 12:49 AM, Takashi Iwai wrote:
>>>>> On Tue, 03 Nov 2015 09:42:54 +0100,
>>>>> libin.yang at linux.intel.com wrote:
>>>>>>
>>>>>> From: Libin Yang <libin.yang at linux.intel.com>
>>>>>>
>>>>>> This is the patch set for Jack support for DP MST audio
>>>>>>
>>>>>> Libin Yang (2):
>>>>>>     ALSA: hda - jack support DP MST audio
>>>>>>     ALSA: hda - hdmi audio add dynamically jack binding to pin
>>>>>
>>>>> I'm somehow confused by this patch series.
>>>>> Is the unsolicited event handling itself changed for MST?  I mean, you
>>>>> cannot know which MST dev# is given beforehand, while you seem
>>> trying
>>>>> to assign such a number to the jack object.
>>>>
>>>> Oh, sorry I forgot to mention that we only operate on device entry 0
>>>> so far in the code. It's misleading.
>>>>
>>>> These patches don't operate on MST audio. The full MST audio driver
>>>> support will be implemented in the later patches. The patches help to
>>>> prepare supporting MST audio.
>>>>
>>>> The purpose of the patches is try to dynamically attach the Jack.
>>>
>>> Well, only judging from the quick glance, I don't buy this strategy,
>>> sorry.  Currently for HDMI/DP, the jack is for PCM, not for pin.
>>> Namely, user-space watches the jack notification to judge whether the
>>> corresponding PCM is available or not.  You're trying to change this
>>> scheme completely.
>>
>> The patch is to make sure the jack is bound to PCM statically.
>> This patch is needed because in old code,  it will create jack with:
>> for (pin_idx = 0; pin_idx < spec->num_pins; pin_idx++) {
>> 	...
>> 	err = generic_hdmi_build_jack(codec, pin_idx);
>> 	...
>> }
>> Which means the jack is created based on pin number and pin_idx.
>> As a pin is bound statically to the PCM, the jack is statically bound to PCM.
>
> OK, so far, so good.
>
>> Now we are using the dynamic pcm bound. If we use the old code to
>> create the jack, the jack will be bound to pin. So we need the patch,
>> which will use the new code:
>> for (pcm_idx = 0; pcm_idx < spec-> pcms_used; pcm_idx++) {
>> 	...
>> 	err = generic_hdmi_build_jack(codec, pcm_idx);
>> 	...
>> }
>> which makes sure that the jack is bound to PCM (jack[0] is bound
>> to pcm[0], jack[1] is bound to pcm[1] and so on).
>>
>> If there is no monitor, no pin is bound to the PCM.
>> So no pin is bound to the Jack. When there is a monitor connected,
>> the pin is bound to a proper PCM. So we should bind the PCM's jack
>> to the pin.
>>
>> For example, jack0 is bound to the PCM 3 (the first jack is bound
>> to the first PCM statically). When a monitor is connected to pin 5,
>> PCM 3 will be assigned to the pin. We need bind jack 0 to pin 5.
>> When monitor is disconnected, we must unbind the jack 0 from pin 5.
>> These operation are done in function
>> snd_hda_jack_bind/ snd_hda_jack_unbind.
>
> Then we shouldn't use the hda_jack.c code at all for HDMI/DP.
> For HDMI/DP with the dynamic PCM binding, the only state to check is
> its PCM assignment.  It doesn't have to issue the jack state check via
> HDA verb at all.  This should make things a lot easier.

I'm now porting the jack supporting for MST audio. The code on 
hdmi-jack branch will create jack differently based codec_has_acomp() 
condition. Does this mean MST Jack binding will handle both situation?

My idea is:
1. Add struct snd_jack *jack[] member in hdmi_spec.
2. Create the jack based on PCM
3. Assign spec->jack[i] to per_pin->acomp_jack when pin is connected.

This should be OK for codec_has_acomp sitation. But what about the 
other situation? The other situation still uses the hda_jack_tbl and 
etc. So we still need handle hda jack if we want to reuse the current 
code.

Best Regards,
Libin

>
>
> Takashi
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel at alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
>