[alsa-devel] [PATCH 14/19] ASoC: intel: boards: add card for MinnowBoard I2S access
Pierre-Louis Bossart
pierre-louis.bossart at linux.intel.com
Fri Dec 18 03:35:51 CET 2015
Add card with dummy codec and DAI to make I2S signals observable.
Uses Mic and Speaker pins/widgets to control DAPM
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart at linux.intel.com>
---
sound/soc/intel/Kconfig | 12 ++
sound/soc/intel/boards/Makefile | 2 +
sound/soc/intel/boards/bytcr_nocodec.c | 233 +++++++++++++++++++++++++++++++++
3 files changed, 247 insertions(+)
create mode 100644 sound/soc/intel/boards/bytcr_nocodec.c
diff --git a/sound/soc/intel/Kconfig b/sound/soc/intel/Kconfig
index 0430e2d..12421c2 100644
--- a/sound/soc/intel/Kconfig
+++ b/sound/soc/intel/Kconfig
@@ -115,6 +115,18 @@ config SND_SOC_INTEL_BYTCR_RT5651_MACH
Say Y if you have such a device
If unsure select "N".
+config SND_SOC_INTEL_BYTCR_NOCODEC_MACH
+ tristate "ASoC Audio driver for Intel Baytrail and Baytrail-CR with no codec (MinnowBoard MAX)"
+ depends on X86 && I2C
+ select SND_SST_MFLD_PLATFORM
+ select SND_SST_IPC_ACPI
+ help
+ This adds support for ASoC machine driver for the MinnowBoard Max
+ and provides access to I2S signals on the Low-Speed connector
+ Say Y if you have such a device
+ If unsure select "N".
+
+
config SND_SOC_INTEL_CHT_BSW_RT5672_MACH
tristate "ASoC Audio driver for Intel Cherrytrail & Braswell with RT5672 codec"
depends on X86_INTEL_LPSS && I2C
diff --git a/sound/soc/intel/boards/Makefile b/sound/soc/intel/boards/Makefile
index 64e4181..c7bf041 100644
--- a/sound/soc/intel/boards/Makefile
+++ b/sound/soc/intel/boards/Makefile
@@ -4,6 +4,7 @@ snd-soc-sst-byt-max98090-mach-objs := byt-max98090.o
snd-soc-sst-broadwell-objs := broadwell.o
snd-soc-sst-bytcr-rt5640-objs := bytcr_rt5640.o
snd-soc-sst-bytcr-rt5651-objs := bytcr_rt5651.o
+snd-soc-sst-bytcr-nocodec-objs := bytcr_nocodec.o
snd-soc-sst-cht-bsw-rt5672-objs := cht_bsw_rt5672.o
snd-soc-sst-cht-bsw-rt5645-objs := cht_bsw_rt5645.o
snd-soc-sst-cht-bsw-max98090_ti-objs := cht_bsw_max98090_ti.o
@@ -16,6 +17,7 @@ obj-$(CONFIG_SND_SOC_INTEL_BYT_MAX98090_MACH) += snd-soc-sst-byt-max98090-mach.o
obj-$(CONFIG_SND_SOC_INTEL_BROADWELL_MACH) += snd-soc-sst-broadwell.o
obj-$(CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH) += snd-soc-sst-bytcr-rt5640.o
obj-$(CONFIG_SND_SOC_INTEL_BYTCR_RT5651_MACH) += snd-soc-sst-bytcr-rt5651.o
+obj-$(CONFIG_SND_SOC_INTEL_BYTCR_NOCODEC_MACH) += snd-soc-sst-bytcr-nocodec.o
obj-$(CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH) += snd-soc-sst-cht-bsw-rt5672.o
obj-$(CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH) += snd-soc-sst-cht-bsw-rt5645.o
obj-$(CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH) += snd-soc-sst-cht-bsw-max98090_ti.o
diff --git a/sound/soc/intel/boards/bytcr_nocodec.c b/sound/soc/intel/boards/bytcr_nocodec.c
new file mode 100644
index 0000000..4eef28f
--- /dev/null
+++ b/sound/soc/intel/boards/bytcr_nocodec.c
@@ -0,0 +1,233 @@
+/*
+ * bytcr_nocodec.c - ASoc Machine driver for MinnowBoard
+ * to make I2S signals observable on the Low-Speed connector. Audio codec
+ * is not managed by ASoC/DAPM
+ *
+ * Copyright (C) 2015 Intel Corp
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/acpi.h>
+#include <linux/device.h>
+#include <linux/dmi.h>
+#include <linux/slab.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/jack.h>
+#include "../atom/sst-atom-controls.h"
+
+
+static const struct snd_soc_dapm_widget byt_nocodec_widgets[] = {
+ SND_SOC_DAPM_MIC("Mic", NULL),
+ SND_SOC_DAPM_SPK("Speaker", NULL),
+};
+
+static const struct snd_soc_dapm_route byt_nocodec_audio_map[] = {
+ {"ssp2 Tx", NULL, "codec_out0"},
+ {"ssp2 Tx", NULL, "codec_out1"},
+ {"codec_in0", NULL, "ssp2 Rx"},
+ {"codec_in1", NULL, "ssp2 Rx"},
+
+ {"ssp2 Rx", NULL, "Mic"},
+ {"Speaker", NULL, "ssp2 Tx"},
+};
+
+static const struct snd_kcontrol_new byt_nocodec_controls[] = {
+ SOC_DAPM_PIN_SWITCH("Mic"),
+ SOC_DAPM_PIN_SWITCH("Speaker"),
+};
+
+static int byt_nocodec_init(struct snd_soc_pcm_runtime *runtime)
+{
+ return 0;
+}
+
+static const struct snd_soc_pcm_stream byt_nocodec_dai_params = {
+ .formats = SNDRV_PCM_FMTBIT_S24_LE,
+ .rate_min = 48000,
+ .rate_max = 48000,
+ .channels_min = 2,
+ .channels_max = 2,
+};
+
+static int byt_nocodec_codec_fixup(struct snd_soc_pcm_runtime *rtd,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_interval *rate = hw_param_interval(params,
+ SNDRV_PCM_HW_PARAM_RATE);
+ struct snd_interval *channels = hw_param_interval(params,
+ SNDRV_PCM_HW_PARAM_CHANNELS);
+ int ret;
+
+ /* The DSP will covert the FE rate to 48k, stereo, 24bits */
+ rate->min = rate->max = 48000;
+ channels->min = channels->max = 2;
+
+ /* set SSP2 to 24-bit */
+ params_set_format(params, SNDRV_PCM_FORMAT_S24_LE);
+
+ /*
+ * Default mode for SSP configuration is TDM 4 slot, override config
+ * with explicit setting to I2S 2ch 24-bit. The word length is set with
+ * dai_set_tdm_slot() since there is no other API exposed
+ */
+ ret = snd_soc_dai_set_fmt(rtd->cpu_dai,
+ SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_IF |
+ SND_SOC_DAIFMT_CBS_CFS
+ );
+
+ if (ret < 0) {
+ dev_err(rtd->dev, "can't set format to I2S, err %d\n", ret);
+ return ret;
+ }
+
+ ret = snd_soc_dai_set_tdm_slot(rtd->cpu_dai, 0x3, 0x3, 2, 24);
+ if (ret < 0) {
+ dev_err(rtd->dev, "can't set I2S config, err %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static unsigned int rates_48000[] = {
+ 48000,
+};
+
+static struct snd_pcm_hw_constraint_list constraints_48000 = {
+ .count = ARRAY_SIZE(rates_48000),
+ .list = rates_48000,
+};
+
+static int byt_nocodec_aif1_startup(struct snd_pcm_substream *substream)
+{
+ return snd_pcm_hw_constraint_list(substream->runtime, 0,
+ SNDRV_PCM_HW_PARAM_RATE,
+ &constraints_48000);
+}
+
+static struct snd_soc_ops byt_nocodec_aif1_ops = {
+ .startup = byt_nocodec_aif1_startup,
+};
+
+static struct snd_soc_dai_link byt_nocodec_dais[] = {
+ [MERR_DPCM_AUDIO] = {
+ .name = "Audio Port",
+ .stream_name = "Audio",
+ .cpu_dai_name = "media-cpu-dai",
+ .codec_dai_name = "snd-soc-dummy-dai",
+ .codec_name = "snd-soc-dummy",
+ .platform_name = "sst-mfld-platform",
+ .ignore_suspend = 1,
+ .nonatomic = true,
+ .dynamic = 1,
+ .dpcm_playback = 1,
+ .dpcm_capture = 1,
+ .ops = &byt_nocodec_aif1_ops,
+ },
+ [MERR_DPCM_DEEP_BUFFER] = {
+ .name = "Deep-Buffer Audio Port",
+ .stream_name = "Deep-Buffer Audio",
+ .cpu_dai_name = "deepbuffer-cpu-dai",
+ .codec_dai_name = "snd-soc-dummy-dai",
+ .codec_name = "snd-soc-dummy",
+ .platform_name = "sst-mfld-platform",
+ .ignore_suspend = 1,
+ .nonatomic = true,
+ .dynamic = 1,
+ .dpcm_playback = 1,
+ .ops = &byt_nocodec_aif1_ops,
+ },
+ [MERR_DPCM_COMPR] = {
+ .name = "Compressed Port",
+ .stream_name = "Compress",
+ .cpu_dai_name = "compress-cpu-dai",
+ .codec_dai_name = "snd-soc-dummy-dai",
+ .codec_name = "snd-soc-dummy",
+ .platform_name = "sst-mfld-platform",
+ },
+ /* CODEC<->CODEC link */
+ /* back ends */
+ {
+ .name = "LowSpeed Connector",
+ .be_id = 1,
+ .cpu_dai_name = "ssp2-port",
+ .platform_name = "sst-mfld-platform",
+ .no_pcm = 1,
+ .codec_dai_name = "snd-soc-dummy-dai",
+ .codec_name = "snd-soc-dummy",
+ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
+ | SND_SOC_DAIFMT_CBS_CFS,
+ .be_hw_params_fixup = byt_nocodec_codec_fixup,
+ .ignore_suspend = 1,
+ .nonatomic = true,
+ .dpcm_playback = 1,
+ .dpcm_capture = 1,
+ .init = byt_nocodec_init,
+ },
+};
+
+/* SoC card */
+static struct snd_soc_card byt_nocodec_card = {
+ .name = "bytcr-nocodec",
+ .owner = THIS_MODULE,
+ .dai_link = byt_nocodec_dais,
+ .dapm_widgets = byt_nocodec_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(byt_nocodec_widgets),
+ .num_links = ARRAY_SIZE(byt_nocodec_dais),
+ .dapm_routes = byt_nocodec_audio_map,
+ .num_dapm_routes = ARRAY_SIZE(byt_nocodec_audio_map),
+ .controls = byt_nocodec_controls,
+ .num_controls = ARRAY_SIZE(byt_nocodec_controls),
+ .fully_routed = true,
+};
+
+static int snd_byt_nocodec_mc_probe(struct platform_device *pdev)
+{
+ int ret_val = 0;
+
+ /* register the soc card */
+ byt_nocodec_card.dev = &pdev->dev;
+
+ ret_val = devm_snd_soc_register_card(&pdev->dev, &byt_nocodec_card);
+
+ if (ret_val) {
+ dev_err(&pdev->dev, "devm_snd_soc_register_card failed %d\n",
+ ret_val);
+ return ret_val;
+ }
+ platform_set_drvdata(pdev, &byt_nocodec_card);
+ return ret_val;
+}
+
+static struct platform_driver snd_byt_nocodec_mc_driver = {
+ .driver = {
+ .name = "bytcr_nocodec",
+ .pm = &snd_soc_pm_ops,
+ },
+ .probe = snd_byt_nocodec_mc_probe,
+};
+
+module_platform_driver(snd_byt_nocodec_mc_driver);
+
+MODULE_DESCRIPTION("ASoC Intel(R) Baytrail CR Nocodec Machine driver");
+MODULE_AUTHOR("Pierre-Louis Bossart <pierre-louis.bossart at linux.intel.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:bytcr_nocodec");
--
1.9.1
More information about the Alsa-devel
mailing list