[alsa-devel] [PATCH v5 2/2] ALSA: hda - hdmi setup pin when monitor hotplug in pcm dynamic assignment mode
libin.yang at linux.intel.com
libin.yang at linux.intel.com
Wed Dec 16 09:48:16 CET 2015
From: Libin Yang <libin.yang at linux.intel.com>
Setup pin configuration when monitor is hotplugged
in pcm dynamic assignment if the PCM is in open state.
When monitor is disconnect, The pin will be reset.
Signed-off-by: Libin Yang <libin.yang at linux.intel.com>
---
sound/pci/hda/patch_hdmi.c | 87 +++++++++++++++++++++++++++++++++++++++++++---
1 file changed, 83 insertions(+), 4 deletions(-)
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index 56b7625..6d6dba4 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -144,6 +144,11 @@ struct hdmi_spec {
/* pcm_bitmap means which pcms have been assigned to pins*/
unsigned long pcm_bitmap;
int pcm_used; /* counter of pcm_rec[] */
+ /* bitmap shows whether the pcm is opened in user space
+ * bit 0 means the first playback PCM (PCM3);
+ * bit 1 means the second playback PCM, and so on.
+ */
+ unsigned long pcm_in_use;
unsigned int channels_max; /* max over all cvts */
struct hdmi_eld temp_eld;
@@ -1523,10 +1528,14 @@ static int hdmi_pcm_open_no_pin(struct hda_pcm_stream *hinfo,
{
struct hdmi_spec *spec = codec->spec;
struct snd_pcm_runtime *runtime = substream->runtime;
- int cvt_idx;
+ int cvt_idx, pcm_idx;
struct hdmi_spec_per_cvt *per_cvt = NULL;
int err;
+ pcm_idx = hinfo_to_pcm_index(codec, hinfo);
+ if (pcm_idx < 0)
+ return -EINVAL;
+
err = hdmi_choose_cvt(codec, -1, &cvt_idx, NULL);
if (err)
return err;
@@ -1537,6 +1546,7 @@ static int hdmi_pcm_open_no_pin(struct hda_pcm_stream *hinfo,
intel_not_share_assigned_cvt_nid(codec, 0, per_cvt->cvt_nid);
+ set_bit(pcm_idx, &spec->pcm_in_use);
/* todo: setup spdif ctls assign */
/* Initially set the converter's capabilities */
@@ -1605,7 +1615,7 @@ static int hdmi_pcm_open(struct hda_pcm_stream *hinfo,
/* Claim converter */
per_cvt->assigned = 1;
-
+ set_bit(pcm_idx, &spec->pcm_in_use);
per_pin = get_pin(spec, pin_idx);
per_pin->cvt_nid = per_cvt->cvt_nid;
hinfo->nid = per_cvt->cvt_nid;
@@ -1730,6 +1740,71 @@ static void hdmi_detach_hda_pcm(struct hdmi_spec *spec,
clear_bit(idx, &spec->pcm_bitmap);
}
+static int hdmi_get_pin_cvt_mux(struct hdmi_spec *spec,
+ struct hdmi_spec_per_pin *per_pin, hda_nid_t cvt_nid)
+{
+ int mux_idx;
+
+ for (mux_idx = 0; mux_idx < per_pin->num_mux_nids; mux_idx++)
+ if (per_pin->mux_nids[mux_idx] == cvt_nid)
+ break;
+ return mux_idx;
+}
+
+static bool check_non_pcm_per_cvt(struct hda_codec *codec, hda_nid_t cvt_nid);
+
+static void hdmi_pcm_setup_pin(struct hdmi_spec *spec,
+ struct hdmi_spec_per_pin *per_pin)
+{
+ struct hda_codec *codec = per_pin->codec;
+ struct hda_pcm *pcm;
+ struct hda_pcm_stream *hinfo;
+ struct snd_pcm_substream *substream;
+ int mux_idx;
+ bool non_pcm;
+
+ if (per_pin->pcm_idx >= 0 && per_pin->pcm_idx < spec->pcm_used)
+ pcm = spec->pcm_rec[per_pin->pcm_idx];
+ else
+ return;
+ if (!test_bit(per_pin->pcm_idx, &spec->pcm_in_use))
+ return;
+
+ /* hdmi audio only uses playback and one substream */
+ hinfo = pcm->stream;
+ substream = pcm->pcm->streams[0].substream;
+
+ per_pin->cvt_nid = hinfo->nid;
+
+ mux_idx = hdmi_get_pin_cvt_mux(spec, per_pin, hinfo->nid);
+ if (mux_idx < per_pin->num_mux_nids)
+ snd_hda_codec_write_cache(codec, per_pin->pin_nid, 0,
+ AC_VERB_SET_CONNECT_SEL,
+ mux_idx);
+ snd_hda_spdif_ctls_assign(codec, per_pin->pcm_idx, hinfo->nid);
+
+ non_pcm = check_non_pcm_per_cvt(codec, hinfo->nid);
+ if (substream->runtime)
+ per_pin->channels = substream->runtime->channels;
+ per_pin->setup = true;
+ per_pin->mux_idx = mux_idx;
+
+ hdmi_setup_audio_infoframe(codec, per_pin, non_pcm);
+}
+
+static void hdmi_pcm_reset_pin(struct hdmi_spec *spec,
+ struct hdmi_spec_per_pin *per_pin)
+{
+ if (per_pin->pcm_idx >= 0 && per_pin->pcm_idx < spec->pcm_used)
+ snd_hda_spdif_ctls_unassign(per_pin->codec, per_pin->pcm_idx);
+
+ per_pin->chmap_set = false;
+ memset(per_pin->chmap, 0, sizeof(per_pin->chmap));
+
+ per_pin->setup = false;
+ per_pin->channels = 0;
+}
+
/* update per_pin ELD from the given new ELD;
* setup info frame and notification accordingly
*/
@@ -1743,10 +1818,13 @@ static void update_eld(struct hda_codec *codec,
bool eld_changed;
if (spec->dyn_pcm_assign) {
- if (eld->eld_valid)
+ if (eld->eld_valid) {
hdmi_attach_hda_pcm(spec, per_pin);
- else
+ hdmi_pcm_setup_pin(spec, per_pin);
+ } else {
+ hdmi_pcm_reset_pin(spec, per_pin);
hdmi_detach_hda_pcm(spec, per_pin);
+ }
}
if (eld->eld_valid)
@@ -2157,6 +2235,7 @@ static int hdmi_pcm_close(struct hda_pcm_stream *hinfo,
hinfo->nid = 0;
mutex_lock(&spec->pcm_lock);
+ clear_bit(pcm_idx, &spec->pcm_in_use);
pin_idx = hinfo_to_pin_index(codec, hinfo);
if (spec->dyn_pcm_assign && pin_idx < 0) {
mutex_unlock(&spec->pcm_lock);
--
1.9.1
More information about the Alsa-devel
mailing list