[alsa-devel] [PATCH v4 4/5] ALSA: hda - hdmi dynamically bind PCM to pin when monitor hotplug
Takashi Iwai
tiwai at suse.de
Wed Dec 16 08:43:12 CET 2015
On Wed, 16 Dec 2015 06:42:44 +0100,
libin.yang at linux.intel.com wrote:
>
> From: Libin Yang <libin.yang at linux.intel.com>
>
> Dynamically bind/unbind the PCM to pin when HDMI/DP monitor hotplug.
>
> When monitor is connected, find a proper PCM for the monitor.
> When monitor is disconnected, unbind the PCM from the pin.
>
> The binding policy (use Intel platform as example) is:
> 1. Try to use the legacy pin-pcm mapping for the device entry 0
> of the pin.
> 2. If step 1 fails, try to bind pin to the backup PCMs. For example,
> on Intel platform, if DP MST is enabled, 5 PCMs will be created.
> PCM 3, PCM 7, PCM 8 are supposed to be used by device entry 0 of
> pin 5, pin 6 and pin 7. PCM 9 and PCM 10 are the backup PCMs.
> 3. If step 2 fails, try to find any PCM to bind to the pin.
>
> Signed-off-by: Libin Yang <libin.yang at linux.intel.com>
This patch adds the code in sync_eld_via_acomp(), i.e. it's handled
only with component. As the dynamic HDA attach/detach itself is
agnostic to the component, I'd suggest to put this rather in
update_eld().
Also pcm_lock can be put in hdmi_present_sense() to wrap both
sync_eld_via_acomp() and hdmi_present_sense_via_verbs().
Takashi
> ---
> sound/pci/hda/patch_hdmi.c | 73 ++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 73 insertions(+)
>
> diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
> index 19bf782..10edab8 100644
> --- a/sound/pci/hda/patch_hdmi.c
> +++ b/sound/pci/hda/patch_hdmi.c
> @@ -73,6 +73,8 @@ struct hdmi_spec_per_cvt {
>
> struct hdmi_spec_per_pin {
> hda_nid_t pin_nid;
> + /* pin idx, different device entries on the same pin use the same idx */
> + int pin_nid_idx;
> int num_mux_nids;
> hda_nid_t mux_nids[HDA_MAX_CONNECTIONS];
> int mux_idx;
> @@ -85,6 +87,7 @@ struct hdmi_spec_per_pin {
> struct snd_kcontrol *eld_ctl;
> struct snd_jack *acomp_jack; /* jack via audio component */
> struct hda_pcm *pcm; /* pointer to spec->pcm_rec[n] dynamically*/
> + int pcm_idx; /* which pcm is attached. -1 means no pcm is attached */
> int repoll_count;
> bool setup; /* the stream has been set up by prepare callback */
> int channels; /* current number of channels */
> @@ -138,6 +141,8 @@ struct hdmi_spec {
> struct snd_array pins; /* struct hdmi_spec_per_pin */
> struct hda_pcm *pcm_rec[16];
> struct mutex pcm_lock;
> + /* pcm_bitmap means which pcms have been assigned to pins*/
> + unsigned long pcm_bitmap;
> int pcm_used; /* counter of pcm_rec[] */
> unsigned int channels_max; /* max over all cvts */
>
> @@ -1786,6 +1791,60 @@ static bool hdmi_present_sense_via_verbs(struct hdmi_spec_per_pin *per_pin,
> return ret;
> }
>
> +static int hdmi_find_pcm_slot(struct hdmi_spec *spec,
> + struct hdmi_spec_per_pin *per_pin)
> +{
> + int i;
> +
> + /* try the prefer PCM */
> + if (!test_bit(per_pin->pin_nid_idx, &spec->pcm_bitmap))
> + return per_pin->pin_nid_idx;
> +
> + /* have a second try; check the "reserved area" over num_pins */
> + for (i = spec->num_pins; i < spec->pcm_used; i++) {
> + if (!test_bit(i, &spec->pcm_bitmap))
> + return i;
> + }
> +
> + /* the last try; check the empty slots in pins */
> + for (i = 0; i < spec->num_pins; i++) {
> + if (!test_bit(i, &spec->pcm_bitmap))
> + return i;
> + }
> + return -EBUSY;
> +}
> +
> +static void hdmi_attach_hda_pcm(struct hdmi_spec *spec,
> + struct hdmi_spec_per_pin *per_pin)
> +{
> + int idx;
> +
> + /* pcm already be attached to the pin */
> + if (per_pin->pcm)
> + return;
> + idx = hdmi_find_pcm_slot(spec, per_pin);
> + if (idx == -ENODEV)
> + return;
> + per_pin->pcm_idx = idx;
> + per_pin->pcm = spec->pcm_rec[idx];
> + set_bit(idx, &spec->pcm_bitmap);
> +}
> +
> +static void hdmi_detach_hda_pcm(struct hdmi_spec *spec,
> + struct hdmi_spec_per_pin *per_pin)
> +{
> + int idx;
> +
> + /* pcm already be detached from the pin */
> + if (!per_pin->pcm)
> + return;
> + idx = per_pin->pcm_idx;
> + per_pin->pcm_idx = -1;
> + per_pin->pcm = NULL;
> + if (idx >= 0 && idx < spec->pcm_used)
> + clear_bit(idx, &spec->pcm_bitmap);
> +}
> +
> /* update ELD and jack state via audio component */
> static void sync_eld_via_acomp(struct hda_codec *codec,
> struct hdmi_spec_per_pin *per_pin)
> @@ -1794,6 +1853,7 @@ static void sync_eld_via_acomp(struct hda_codec *codec,
> struct hdmi_eld *eld = &spec->temp_eld;
> int size;
>
> + mutex_lock(&spec->pcm_lock);
> mutex_lock(&per_pin->lock);
> size = snd_hdac_acomp_get_eld(&codec->bus->core, per_pin->pin_nid,
> &eld->monitor_present, eld->eld_buffer,
> @@ -1815,11 +1875,19 @@ static void sync_eld_via_acomp(struct hda_codec *codec,
> eld->eld_size = 0;
> }
>
> + if (spec->dyn_pcm_assign) {
> + if (eld->eld_valid)
> + hdmi_attach_hda_pcm(spec, per_pin);
> + else
> + hdmi_detach_hda_pcm(spec, per_pin);
> + }
> +
> update_eld(codec, per_pin, eld);
> snd_jack_report(per_pin->acomp_jack,
> eld->monitor_present ? SND_JACK_AVOUT : 0);
> unlock:
> mutex_unlock(&per_pin->lock);
> + mutex_unlock(&spec->pcm_lock);
> }
>
> static bool hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, int repoll)
> @@ -1875,6 +1943,11 @@ static int hdmi_add_pin(struct hda_codec *codec, hda_nid_t pin_nid)
>
> per_pin->pin_nid = pin_nid;
> per_pin->non_pcm = false;
> + if (spec->dyn_pcm_assign)
> + per_pin->pcm_idx = -1;
> + else
> + per_pin->pcm_idx = pin_idx;
> + per_pin->pin_nid_idx = pin_idx;
>
> err = hdmi_read_pin_conn(codec, pin_idx);
> if (err < 0)
> --
> 1.9.1
>
More information about the Alsa-devel
mailing list