[alsa-devel] [PATCH v3 01/13] ASoC: Intel: Skylake: Clear stream registers before stream setup
Vinod Koul
vinod.koul at intel.com
Mon Dec 14 05:27:17 CET 2015
From: Jeeja KP <jeeja.kp at intel.com>
This patch adds clean up routine to clear the stream registers and
calls this routine before setting up stream registers.
Signed-off-by: Jeeja KP <jeeja.kp at intel.com>
Signed-off-by: Vinod Koul <vinod.koul at intel.com>
---
sound/soc/intel/skylake/skl-sst-cldma.c | 38 ++++++++++++++++++++-------------
1 file changed, 23 insertions(+), 15 deletions(-)
diff --git a/sound/soc/intel/skylake/skl-sst-cldma.c b/sound/soc/intel/skylake/skl-sst-cldma.c
index 8c7e8576cba3..da2329d17f4d 100644
--- a/sound/soc/intel/skylake/skl-sst-cldma.c
+++ b/sound/soc/intel/skylake/skl-sst-cldma.c
@@ -60,6 +60,27 @@ static void skl_cldma_stream_run(struct sst_dsp *ctx, bool enable)
dev_err(ctx->dev, "Failed to set Run bit=%d enable=%d\n", val, enable);
}
+static void skl_cldma_stream_clear(struct sst_dsp *ctx)
+{
+ /* make sure Run bit is cleared before setting stream register */
+ skl_cldma_stream_run(ctx, 0);
+
+ sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
+ CL_SD_CTL_IOCE_MASK, CL_SD_CTL_IOCE(0));
+ sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
+ CL_SD_CTL_FEIE_MASK, CL_SD_CTL_FEIE(0));
+ sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
+ CL_SD_CTL_DEIE_MASK, CL_SD_CTL_DEIE(0));
+ sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
+ CL_SD_CTL_STRM_MASK, CL_SD_CTL_STRM(0));
+
+ sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_BDLPL, CL_SD_BDLPLBA(0));
+ sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_BDLPU, 0);
+
+ sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_CBL, 0);
+ sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_LVI, 0);
+}
+
/* Code loader helper APIs */
static void skl_cldma_setup_bdle(struct sst_dsp *ctx,
struct snd_dma_buffer *dmab_data,
@@ -95,6 +116,7 @@ static void skl_cldma_setup_controller(struct sst_dsp *ctx,
struct snd_dma_buffer *dmab_bdl, unsigned int max_size,
u32 count)
{
+ skl_cldma_stream_clear(ctx);
sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_BDLPL,
CL_SD_BDLPLBA(dmab_bdl->addr));
sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_BDLPU,
@@ -137,21 +159,7 @@ static void skl_cldma_cleanup_spb(struct sst_dsp *ctx)
static void skl_cldma_cleanup(struct sst_dsp *ctx)
{
skl_cldma_cleanup_spb(ctx);
-
- sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
- CL_SD_CTL_IOCE_MASK, CL_SD_CTL_IOCE(0));
- sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
- CL_SD_CTL_FEIE_MASK, CL_SD_CTL_FEIE(0));
- sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
- CL_SD_CTL_DEIE_MASK, CL_SD_CTL_DEIE(0));
- sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
- CL_SD_CTL_STRM_MASK, CL_SD_CTL_STRM(0));
-
- sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_BDLPL, CL_SD_BDLPLBA(0));
- sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_BDLPU, 0);
-
- sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_CBL, 0);
- sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_LVI, 0);
+ skl_cldma_stream_clear(ctx);
ctx->dsp_ops.free_dma_buf(ctx->dev, &ctx->cl_dev.dmab_data);
ctx->dsp_ops.free_dma_buf(ctx->dev, &ctx->cl_dev.dmab_bdl);
--
1.9.1
More information about the Alsa-devel
mailing list