[alsa-devel] [PATCH v3 4/4] ALSA: hda - Move audio component accesses to hdac_i915.c
Takashi Iwai
tiwai at suse.de
Fri Dec 4 18:12:49 CET 2015
A couple of i915_audio_component ops have been added and accessed
directly from patch_hdmi.c. Ideally all these should be factored out
into hdac_i915.c.
This patch does it, adds two new helper functions for setting N/CTS
and fetching ELD bytes. One bonus is that the hackish widget vs port
mapping is also moved to hdac_i915.c, so that it can be fixed /
enhanced more cleanly.
Signed-off-by: Takashi Iwai <tiwai at suse.de>
---
include/sound/hda_i915.h | 14 ++++++++++
sound/hda/hdac_i915.c | 66 ++++++++++++++++++++++++++++++++++++++++++++
sound/pci/hda/patch_hdmi.c | 69 +++++++++++++++++-----------------------------
3 files changed, 106 insertions(+), 43 deletions(-)
diff --git a/include/sound/hda_i915.h b/include/sound/hda_i915.h
index 930b41e5acf4..fa341fcb5829 100644
--- a/include/sound/hda_i915.h
+++ b/include/sound/hda_i915.h
@@ -10,6 +10,9 @@
int snd_hdac_set_codec_wakeup(struct hdac_bus *bus, bool enable);
int snd_hdac_display_power(struct hdac_bus *bus, bool enable);
int snd_hdac_get_display_clk(struct hdac_bus *bus);
+int snd_hdac_sync_audio_rate(struct hdac_bus *bus, hda_nid_t nid, int rate);
+int snd_hdac_acomp_get_eld(struct hdac_bus *bus, hda_nid_t nid,
+ bool *audio_enabled, char *buffer, int max_bytes);
int snd_hdac_i915_init(struct hdac_bus *bus);
int snd_hdac_i915_exit(struct hdac_bus *bus);
int snd_hdac_i915_register_notifier(const struct i915_audio_component_audio_ops *);
@@ -26,6 +29,17 @@ static inline int snd_hdac_get_display_clk(struct hdac_bus *bus)
{
return 0;
}
+static inline int snd_hdac_sync_audio_rate(struct hdac_bus *bus, hda_nid_t nid,
+ int rate)
+{
+ return 0;
+}
+static inline int snd_hdac_acomp_get_eld(struct hdac_bus *bus, hda_nid_t nid,
+ bool *audio_enabled, char *buffer,
+ int max_bytes)
+{
+ return -ENODEV;
+}
static inline int snd_hdac_i915_init(struct hdac_bus *bus)
{
return -ENODEV;
diff --git a/sound/hda/hdac_i915.c b/sound/hda/hdac_i915.c
index 8fef1b8d1fd8..c50177fb469f 100644
--- a/sound/hda/hdac_i915.c
+++ b/sound/hda/hdac_i915.c
@@ -118,6 +118,72 @@ int snd_hdac_get_display_clk(struct hdac_bus *bus)
}
EXPORT_SYMBOL_GPL(snd_hdac_get_display_clk);
+/* There is a fixed mapping between audio pin node and display port
+ * on current Intel platforms:
+ * Pin Widget 5 - PORT B (port = 1 in i915 driver)
+ * Pin Widget 6 - PORT C (port = 2 in i915 driver)
+ * Pin Widget 7 - PORT D (port = 3 in i915 driver)
+ */
+static int pin2port(hda_nid_t pin_nid)
+{
+ return pin_nid - 4;
+}
+
+/**
+ * snd_hdac_sync_audio_rate - Set N/CTS based on the sample rate
+ * @bus: HDA core bus
+ * @nid: the pin widget NID
+ * @rate: the sample rate to set
+ *
+ * This function is supposed to be used only by a HD-audio controller
+ * driver that needs the interaction with i915 graphics.
+ *
+ * This function sets N/CTS value based on the given sample rate.
+ * Returns zero for success, or a negative error code.
+ */
+int snd_hdac_sync_audio_rate(struct hdac_bus *bus, hda_nid_t nid, int rate)
+{
+ struct i915_audio_component *acomp = bus->audio_component;
+
+ if (!acomp || !acomp->ops || !acomp->ops->sync_audio_rate)
+ return -ENODEV;
+ return acomp->ops->sync_audio_rate(acomp->dev, pin2port(nid), rate);
+}
+EXPORT_SYMBOL_GPL(snd_hdac_sync_audio_rate);
+
+/**
+ * snd_hdac_acomp_get_eld - Get the audio state and ELD via component
+ * @bus: HDA core bus
+ * @nid: the pin widget NID
+ * @audio_enabled: the pointer to store the current audio state
+ * @buffer: the buffer pointer to store ELD bytes
+ * @max_bytes: the max bytes to be stored on @buffer
+ *
+ * This function is supposed to be used only by a HD-audio controller
+ * driver that needs the interaction with i915 graphics.
+ *
+ * This function queries the current state of the audio on the given
+ * digital port and fetches the ELD bytes onto the given buffer.
+ * It returns the number of bytes for the total ELD data, zero for
+ * invalid ELD, or a negative error code.
+ *
+ * The return size is the total bytes required for the whole ELD bytes,
+ * thus it may be over @max_bytes. If it's over @max_bytes, it implies
+ * that only a part of ELD bytes have been fetched.
+ */
+int snd_hdac_acomp_get_eld(struct hdac_bus *bus, hda_nid_t nid,
+ bool *audio_enabled, char *buffer, int max_bytes)
+{
+ struct i915_audio_component *acomp = bus->audio_component;
+
+ if (!acomp || !acomp->ops || !acomp->ops->get_eld)
+ return -ENODEV;
+
+ return acomp->ops->get_eld(acomp->dev, pin2port(nid), audio_enabled,
+ buffer, max_bytes);
+}
+EXPORT_SYMBOL_GPL(snd_hdac_acomp_get_eld);
+
static int hdac_component_master_bind(struct device *dev)
{
struct i915_audio_component *acomp = hdac_acomp;
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index 61f004a73590..1ef0c6959e75 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -1438,17 +1438,6 @@ static void intel_not_share_assigned_cvt(struct hda_codec *codec,
}
}
-/* There is a fixed mapping between audio pin node and display port
- * on current Intel platforms:
- * Pin Widget 5 - PORT B (port = 1 in i915 driver)
- * Pin Widget 6 - PORT C (port = 2 in i915 driver)
- * Pin Widget 7 - PORT D (port = 3 in i915 driver)
- */
-static int intel_pin2port(hda_nid_t pin_nid)
-{
- return pin_nid - 4;
-}
-
/*
* HDA PCM callbacks
*/
@@ -1660,38 +1649,36 @@ static bool hdmi_present_sense_via_verbs(struct hdmi_spec_per_pin *per_pin,
static void sync_eld_via_acomp(struct hda_codec *codec,
struct hdmi_spec_per_pin *per_pin)
{
- struct i915_audio_component *acomp = codec->bus->core.audio_component;
struct hdmi_spec *spec = codec->spec;
struct hdmi_eld *eld = &spec->temp_eld;
int size;
- if (acomp && acomp->ops && acomp->ops->get_eld) {
- mutex_lock(&per_pin->lock);
- size = acomp->ops->get_eld(acomp->dev,
- intel_pin2port(per_pin->pin_nid),
- &eld->monitor_present,
- eld->eld_buffer,
- ELD_MAX_SIZE);
- if (size > 0) {
- size = min(size, ELD_MAX_SIZE);
- if (snd_hdmi_parse_eld(codec, &eld->info,
- eld->eld_buffer, size) < 0)
- size = -EINVAL;
- }
-
- if (size > 0) {
- eld->eld_valid = true;
- eld->eld_size = size;
- } else {
- eld->eld_valid = false;
- eld->eld_size = 0;
- }
-
- update_eld(codec, per_pin, eld);
- snd_jack_report(per_pin->acomp_jack,
- eld->monitor_present ? SND_JACK_AVOUT : 0);
- mutex_unlock(&per_pin->lock);
+ mutex_lock(&per_pin->lock);
+ size = snd_hdac_acomp_get_eld(&codec->bus->core, per_pin->pin_nid,
+ &eld->monitor_present, eld->eld_buffer,
+ ELD_MAX_SIZE);
+ if (size < 0)
+ goto unlock;
+ if (size > 0) {
+ size = min(size, ELD_MAX_SIZE);
+ if (snd_hdmi_parse_eld(codec, &eld->info,
+ eld->eld_buffer, size) < 0)
+ size = -EINVAL;
+ }
+
+ if (size > 0) {
+ eld->eld_valid = true;
+ eld->eld_size = size;
+ } else {
+ eld->eld_valid = false;
+ eld->eld_size = 0;
}
+
+ update_eld(codec, per_pin, eld);
+ snd_jack_report(per_pin->acomp_jack,
+ eld->monitor_present ? SND_JACK_AVOUT : 0);
+ unlock:
+ mutex_unlock(&per_pin->lock);
}
static bool hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, int repoll)
@@ -1857,7 +1844,6 @@ static int generic_hdmi_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
struct hdmi_spec_per_pin *per_pin = get_pin(spec, pin_idx);
hda_nid_t pin_nid = per_pin->pin_nid;
struct snd_pcm_runtime *runtime = substream->runtime;
- struct i915_audio_component *acomp = codec->bus->core.audio_component;
bool non_pcm;
int pinctl;
@@ -1876,10 +1862,7 @@ static int generic_hdmi_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
/* Call sync_audio_rate to set the N/CTS/M manually if necessary */
/* Todo: add DP1.2 MST audio support later */
- if (acomp && acomp->ops && acomp->ops->sync_audio_rate)
- acomp->ops->sync_audio_rate(acomp->dev,
- intel_pin2port(pin_nid),
- runtime->rate);
+ snd_hdac_sync_audio_rate(&codec->bus->core, pin_nid, runtime->rate);
non_pcm = check_non_pcm_per_cvt(codec, cvt_nid);
mutex_lock(&per_pin->lock);
--
2.6.3
More information about the Alsa-devel
mailing list