[alsa-devel] [PATCH 00/15] ASoC: hdac_hdmi: Add DP & notification support
Subhransu S. Prusty
subhransu.s.prusty at intel.com
Tue Dec 1 18:42:29 CET 2015
This patch series adds DP audio and hotplug notification
support.
On Skylake two DP ports are available and to enable DP on both
ports all pins need to be enabled.
There is a special vendor widget which need to be programmed to
enable all pins and converters. This series adds hotplug
notification, read/set constraint based on ELD, enable all
pin/cvts, DP1.2, programs the audio infoframe for DP. There is
a one to one mapping between converter and stream, so the dais
are created based on the no of streams supported on hdmi codec.
Even though cvts can be mapped dynamically to the streams,
currently it is statically mapped as simultaneous playback on
both DP and HDMI is not supported as of now.
Pin muxes and controls are created dynamically to map converter
to pin widget. So at run time specific pin is mapped to the dai
based on the control selected (based on the display type DP/HDMI
connected).
Finally the DP audio infoframe programming is added to support
the DP feature.
Also with hotplug notification support, ELD is read and
capabilities are set for rate, formats and channels. drm_eld
sound/core framework is updated to limit the formats based on
ELD.
There are few fixes one fixing the static checker warning and
other one not to fail if no connection list is found for a pin
widget.
Pls note, the 12th patch is adding a small macro for getting
connection type in drm header, we have CCed drm folks on that and
this one. Pls ack so that we can have this series merged thru
sound trees
Jeeja KP (1):
ASoC: hdac_hdmi: Add codec suspend/resume handler
Ramesh Babu (1):
ASoC: hdac_hdmi: Keep display active while enumerating codec
Subhransu S. Prusty (13):
ASoC: hdac_hdmi: Fix to check num nodes correctly
ASoC: hdac_hdmi: Fix to warn instead of err for no connected nids
ASoC: hdac_hdmi - Use list to add pins and converters
ALSA: hda - Add helper to read eld data
ASoC: hdac_hdmi: Add hotplug notification and read eld
ALSA: pcm: Add DRM helper to set constraint for format
ASoC: hdac_hdmi: Apply constraints based on ELD
ASoC: hdac_hdmi: Enable DP1.2 and all converters/pins
ASoC: hdac_hdmi - create dais based on number of streams
ASoC: hdac_hdmi: Create widget/route based on nodes enumerated
ASoC: hdac_hdmi: Assign pin for stream based on dapm connection
drm/edid: Add API to help find connection type
ASoC: hdac_hdmi: Add infoframe support for dp audio
include/drm/drm_edid.h | 10 +
include/sound/hdaudio.h | 3 +
sound/core/pcm_drm_eld.c | 42 +-
sound/hda/Makefile | 2 +-
sound/hda/hdac_eld.c | 95 +++++
sound/soc/codecs/Kconfig | 1 +
sound/soc/codecs/hdac_hdmi.c | 908 ++++++++++++++++++++++++++++++++++++-------
7 files changed, 908 insertions(+), 153 deletions(-)
create mode 100644 sound/hda/hdac_eld.c
--
1.9.1
More information about the Alsa-devel
mailing list