[alsa-devel] [PATCH] ALSA: hda - Shutdown CX20722 on reboot/free to avoid spurious noises
Takashi Iwai
tiwai at suse.de
Fri Aug 21 10:26:36 CEST 2015
On Fri, 21 Aug 2015 09:42:35 +0200,
David Henningsson wrote:
>
> On shutdown/reboot of CX20722, first shut down all EAPDs, then
> shut down the afg node to D3.
>
> Failure to do so can lead to spurious noises from the internal speaker
> directly after reboot (and before the codec is reinitialized again, i e
> in BIOS setup or GRUB menus).
>
> BugLink: https://bugs.launchpad.net/bugs/1487345
> Signed-off-by: David Henningsson <david.henningsson at canonical.com>
It's worth for stable, right?
Takashi
> ---
> sound/pci/hda/patch_conexant.c | 23 ++++++++++++++++++++++-
> 1 file changed, 22 insertions(+), 1 deletion(-)
>
> diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
> index f788a91..ca03c40 100644
> --- a/sound/pci/hda/patch_conexant.c
> +++ b/sound/pci/hda/patch_conexant.c
> @@ -200,12 +200,33 @@ static int cx_auto_init(struct hda_codec *codec)
> return 0;
> }
>
> -#define cx_auto_free snd_hda_gen_free
> +static void cx_auto_reboot_notify(struct hda_codec *codec)
> +{
> + struct conexant_spec *spec = codec->spec;
> +
> + if (codec->core.vendor_id != 0x14f150f2)
> + return;
> +
> + /* Turn the CX20722 codec into D3 to avoid spurious noises
> + from the internal speaker during (and after) reboot */
> + cx_auto_turn_eapd(codec, spec->num_eapds, spec->eapds, false);
> +
> + snd_hda_codec_set_power_to_all(codec, codec->core.afg, AC_PWRST_D3);
> + snd_hda_codec_write(codec, codec->core.afg, 0,
> + AC_VERB_SET_POWER_STATE, AC_PWRST_D3);
> +}
> +
> +static void cx_auto_free(struct hda_codec *codec)
> +{
> + cx_auto_reboot_notify(codec);
> + snd_hda_gen_free(codec);
> +}
>
> static const struct hda_codec_ops cx_auto_patch_ops = {
> .build_controls = cx_auto_build_controls,
> .build_pcms = snd_hda_gen_build_pcms,
> .init = cx_auto_init,
> + .reboot_notify = cx_auto_reboot_notify,
> .free = cx_auto_free,
> .unsol_event = snd_hda_jack_unsol_event,
> #ifdef CONFIG_PM
> --
> 1.9.1
>
More information about the Alsa-devel
mailing list