[alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)

[Christian Hartmann]

Hi again,

>> in  arizona-spi I try to map these GPIOs, which I want to get in
>> arizona-core: arizona_dev_init
>>
>> diff --git a/drivers/mfd/arizona-spi.c b/drivers/mfd/arizona-spi.c
>> index 1e845f6..52872a0 100644
>> --- a/drivers/mfd/arizona-spi.c
>> +++ b/drivers/mfd/arizona-spi.c
>> @@ -18,28 +18,58 @@
>>  #include <linux/slab.h>
>>  #include <linux/spi/spi.h>
>>  #include <linux/of.h>
>> +#include <linux/acpi.h>
>>
>>  #include <linux/mfd/arizona/core.h>
>>
>>  #include "arizona.h"
>>
>> +const struct acpi_gpio_params reset_gpio = { 1, 0, false};
>> +const struct acpi_gpio_params ldoena_gpio = { 2, 0, false};
>> +
>> +const struct acpi_gpio_mapping arizona_acpi_gpios[] = {
>> +       { "reset_gpio", &reset_gpio, 1,},
>> +       { "ldoena_gpio", &ldoena_gpio, 1},
>
> The correct names are "reset-gpios" and "ldoena-gpios". If you call
>
>         reset = devm_gpiod_get_optional(arizona->dev, "reset", GPIOD_OUT_LOW);
>
> GPIO core will look for "reset-gpios" and then "reset-gpio" not
> "reset_gpio" so it will not find the mapping.

yes you are right, I had fixed it yesterday by changing the names.

+const struct acpi_gpio_params reset_gpios = { 1, 0, false};
+const struct acpi_gpio_params ldoena_gpios = { 2, 0, false};
+
+const struct acpi_gpio_mapping arizona_acpi_gpios[] = {
+       { "reset-gpios", &reset_gpios, 1,},
+       { "ldoena-gpios", &ldoena_gpios, 1},
+       { },
+};



Today I can see that the mapping is working as seen below.
But for unknown reasons I got wrong values read
via devm_gpiod_get_optional() in the arizona_dev_init ->
arizona_of_get_core_pdata()

[    6.387993] pxa2xx-spi 80860F0E:00: no DMA channels available, using PIO
[    6.389258] pxa2xx-spi 80860F0E:00: registered master spi32766 (dynamic)
[    6.389416] spi spi-WM510205:00: 8333333 Hz actual, PIO
[    6.389424] spi spi-WM510205:00: setup mode 0, 8 bits/w, 8000000 Hz max --> 0
[    6.389567] spi spi-WM510205:00: checking WM510205 with bmp180
[    6.389574] spi spi-WM510205:00: checking WM510205 with bmp181
[    6.389578] spi spi-WM510205:00: modalias WM510205 in id_table not
found, returns NULL
[    6.405723] arizona spi-WM510205:00: arizona_acpi_get_type(), than
via spi_get_device_id().
[    6.405735] arizona spi-WM510205:00: arizona_acpi_get_type matched
[    6.405740] arizona spi-WM510205:00: using 1 as type for arizona audio codec
[    6.405744] arizona spi-WM510205:00: regmap set to wm5102_spi
[    6.406557] arizona spi-WM510205:00: spi_irq = -1
[    6.406565] arizona spi-WM510205:00: acpi_dev_add_driver_gpios
arizona_acpi_gpios added done, 0
[    6.406569] arizona spi-WM510205:00: arizona_spi_probe done,
calling arizona_dev_init
[    6.406574] arizona spi-WM510205:00: dev_set_drvdata done for 1
[    6.406580] arizona spi-WM510205:00: GPIO lookup for consumer reset
[    6.406585] arizona spi-WM510205:00: using ACPI for GPIO lookup
[    6.406590] acpi WM510205:00: GPIO: looking up reset-gpios
[    6.406597] acpi WM510205:00: GPIO: _DSD returned WM510205:00 3 1 0 0
[    6.406673] acpi WM510205:00: GPIO: looking up 0 in _CRS
[    6.406724] arizona spi-WM510205:00: GPIO lookup for consumer ldoena
[    6.406729] arizona spi-WM510205:00: using ACPI for GPIO lookup
[    6.406733] acpi WM510205:00: GPIO: looking up ldoena-gpios
[    6.406739] acpi WM510205:00: GPIO: _DSD returned WM510205:00 3 2 0 0
[    6.406790] acpi WM510205:00: GPIO: looking up 0 in _CRS
[    6.406844] arizona spi-WM510205:00: arizona_of_get_core_pdata
(ACPI) using irq_gpio GPIO = 146
[    6.406850] arizona spi-WM510205:00: arizona_of_get_core_pdata
(ACPI) using ldoena GPIO =  -185173228
[    6.406855] arizona spi-WM510205:00: arizona_of_get_core_pdata
(ACPI) using reset GPIO =  -184741840
[    6.406859] arizona spi-WM510205:00: arizona_of_get_core_pdata for 1
[    6.406864] arizona spi-WM510205:00: regcache_cache_only for 1 set
[    6.406868] arizona spi-WM510205:00: added wm5102_core_supplies for 1
[    6.407100] spi-WM510205:00 supply AVDD not found, using dummy regulator
[    6.407131] spi-WM510205:00 supply DBVDD1 not found, using dummy regulator
[    6.407162] LDO1: supplied by regulator-dummy
[    6.407214] ------------[ cut here ]------------
[    6.407226] WARNING: CPU: 0 PID: 472 at drivers/gpio/gpiolib.c:86
gpio_to_desc+0xbb/0xd0()


did I cast the values wrong?

cheers
chris