[alsa-devel] Applied "ASoC: wm8960: update pll and clock setting function" to the asoc tree
Mark Brown
broonie at kernel.org
Tue Aug 11 18:27:54 CEST 2015
The patch
ASoC: wm8960: update pll and clock setting function
has been applied to the asoc tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 3176bf2d7ccd64da9be7b07036e0ba8293179906 Mon Sep 17 00:00:00 2001
From: Zidan Wang <zidan.wang at freescale.com>
Date: Tue, 11 Aug 2015 19:25:15 +0800
Subject: [PATCH] ASoC: wm8960: update pll and clock setting function
Add sysclk auto mode. When it's sysclk auto mode, if the MCLK is
available for clock configure, using MCLK to provide sysclk directly,
otherwise, search a available pll out frequcncy and set pll.
Configure clock in hw_params may cause problems when using bypass style
paths without hw_params in machine driver getting called. So add configure
clock to set_bias_level.
Signed-off-by: Zidan Wang <zidan.wang at freescale.com>
Acked-by: Charles Keepax <ckeepax at opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie at kernel.org>
---
sound/soc/codecs/wm8960.c | 220 +++++++++++++++++++++++++++++++++++++---------
sound/soc/codecs/wm8960.h | 1 +
2 files changed, 180 insertions(+), 41 deletions(-)
diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c
index 94c5c46..0fc8364 100644
--- a/sound/soc/codecs/wm8960.c
+++ b/sound/soc/codecs/wm8960.c
@@ -48,6 +48,9 @@
#define WM8960_DISOP 0x40
#define WM8960_DRES_MASK 0x30
+static bool is_pll_freq_available(unsigned int source, unsigned int target);
+static int wm8960_set_pll(struct snd_soc_codec *codec,
+ unsigned int freq_in, unsigned int freq_out);
/*
* wm8960 register cache
* We can't read the WM8960 register space when we are
@@ -126,9 +129,12 @@ struct wm8960_priv {
struct snd_soc_dapm_widget *rout1;
struct snd_soc_dapm_widget *out3;
bool deemph;
- int playback_fs;
+ int lrclk;
int bclk;
int sysclk;
+ int clk_id;
+ int freq_in;
+ bool is_stream_in_use[2];
struct wm8960_data pdata;
};
@@ -164,8 +170,8 @@ static int wm8960_set_deemph(struct snd_soc_codec *codec)
if (wm8960->deemph) {
best = 1;
for (i = 2; i < ARRAY_SIZE(deemph_settings); i++) {
- if (abs(deemph_settings[i] - wm8960->playback_fs) <
- abs(deemph_settings[best] - wm8960->playback_fs))
+ if (abs(deemph_settings[i] - wm8960->lrclk) <
+ abs(deemph_settings[best] - wm8960->lrclk))
best = i;
}
@@ -565,6 +571,9 @@ static struct {
{ 8000, 5 },
};
+/* -1 for reserved value */
+static const int sysclk_divs[] = { 1, -1, 2, -1 };
+
/* Multiply 256 for internal 256 div */
static const int dac_divs[] = { 256, 384, 512, 768, 1024, 1408, 1536 };
@@ -574,61 +583,110 @@ static const int bclk_divs[] = {
120, 160, 220, 240, 320, 320, 320
};
-static void wm8960_configure_clocking(struct snd_soc_codec *codec,
- bool tx, int lrclk)
+static int wm8960_configure_clocking(struct snd_soc_codec *codec)
{
struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
+ int sysclk, bclk, lrclk, freq_out, freq_in;
u16 iface1 = snd_soc_read(codec, WM8960_IFACE1);
- u16 iface2 = snd_soc_read(codec, WM8960_IFACE2);
- u32 sysclk;
- int i, j;
+ int i, j, k;
if (!(iface1 & (1<<6))) {
dev_dbg(codec->dev,
"Codec is slave mode, no need to configure clock\n");
- return;
+ return 0;
+ }
+
+ if (wm8960->clk_id != WM8960_SYSCLK_MCLK && !wm8960->freq_in) {
+ dev_err(codec->dev, "No MCLK configured\n");
+ return -EINVAL;
}
- if (!wm8960->sysclk) {
- dev_dbg(codec->dev, "No SYSCLK configured\n");
- return;
+ freq_in = wm8960->freq_in;
+ bclk = wm8960->bclk;
+ lrclk = wm8960->lrclk;
+ /*
+ * If it's sysclk auto mode, check if the MCLK can provide sysclk or
+ * not. If MCLK can provide sysclk, using MCLK to provide sysclk
+ * directly. Otherwise, auto select a available pll out frequency
+ * and set PLL.
+ */
+ if (wm8960->clk_id == WM8960_SYSCLK_AUTO) {
+ /* disable the PLL and using MCLK to provide sysclk */
+ wm8960_set_pll(codec, 0, 0);
+ freq_out = freq_in;
+ } else if (wm8960->sysclk) {
+ freq_out = wm8960->sysclk;
+ } else {
+ dev_err(codec->dev, "No SYSCLK configured\n");
+ return -EINVAL;
}
- if (!wm8960->bclk || !lrclk) {
- dev_dbg(codec->dev, "No audio clocks configured\n");
- return;
+ /* check if the sysclk frequency is available. */
+ for (i = 0; i < ARRAY_SIZE(sysclk_divs); ++i) {
+ if (sysclk_divs[i] == -1)
+ continue;
+ sysclk = freq_out / sysclk_divs[i];
+ for (j = 0; j < ARRAY_SIZE(dac_divs); ++j) {
+ if (sysclk == dac_divs[j] * lrclk) {
+ for (k = 0; k < ARRAY_SIZE(bclk_divs); ++k)
+ if (sysclk == bclk * bclk_divs[k] / 10)
+ break;
+ if (k != ARRAY_SIZE(bclk_divs))
+ break;
+ }
+ }
+ if (j != ARRAY_SIZE(dac_divs))
+ break;
}
- for (i = 0; i < ARRAY_SIZE(dac_divs); ++i) {
- if (wm8960->sysclk == lrclk * dac_divs[i]) {
- for (j = 0; j < ARRAY_SIZE(bclk_divs); ++j) {
- sysclk = wm8960->bclk * bclk_divs[j] / 10;
- if (wm8960->sysclk == sysclk)
+ if (i != ARRAY_SIZE(sysclk_divs)) {
+ goto configure_clock;
+ } else if (wm8960->clk_id != WM8960_SYSCLK_AUTO) {
+ dev_err(codec->dev, "failed to configure clock\n");
+ return -EINVAL;
+ }
+ /* get a available pll out frequency and set pll */
+ for (i = 0; i < ARRAY_SIZE(sysclk_divs); ++i) {
+ if (sysclk_divs[i] == -1)
+ continue;
+ for (j = 0; j < ARRAY_SIZE(dac_divs); ++j) {
+ sysclk = lrclk * dac_divs[j];
+ freq_out = sysclk * sysclk_divs[i];
+
+ for (k = 0; k < ARRAY_SIZE(bclk_divs); ++k) {
+ if (sysclk == bclk * bclk_divs[k] / 10 &&
+ is_pll_freq_available(freq_in, freq_out)) {
+ wm8960_set_pll(codec,
+ freq_in, freq_out);
break;
+ } else {
+ continue;
+ }
}
- if(j != ARRAY_SIZE(bclk_divs))
+ if (k != ARRAY_SIZE(bclk_divs))
break;
}
+ if (j != ARRAY_SIZE(dac_divs))
+ break;
}
- if (i == ARRAY_SIZE(dac_divs)) {
- dev_err(codec->dev, "Unsupported sysclk %d\n", wm8960->sysclk);
- return;
+ if (i == ARRAY_SIZE(sysclk_divs)) {
+ dev_err(codec->dev, "failed to configure clock\n");
+ return -EINVAL;
}
- /*
- * configure frame clock. If ADCLRC configure as GPIO pin, DACLRC
- * pin is used as a frame clock for ADCs and DACs.
- */
- if (iface2 & (1<<6))
- snd_soc_update_bits(codec, WM8960_CLOCK1, 0x7 << 3, i << 3);
- else if (tx)
- snd_soc_update_bits(codec, WM8960_CLOCK1, 0x7 << 3, i << 3);
- else if (!tx)
- snd_soc_update_bits(codec, WM8960_CLOCK1, 0x7 << 6, i << 6);
+configure_clock:
+ /* configure sysclk clock */
+ snd_soc_update_bits(codec, WM8960_CLOCK1, 3 << 1, i << 1);
+
+ /* configure frame clock */
+ snd_soc_update_bits(codec, WM8960_CLOCK1, 0x7 << 3, j << 3);
+ snd_soc_update_bits(codec, WM8960_CLOCK1, 0x7 << 6, j << 6);
/* configure bit clock */
- snd_soc_update_bits(codec, WM8960_CLOCK2, 0xf, j);
+ snd_soc_update_bits(codec, WM8960_CLOCK2, 0xf, k);
+
+ return 0;
}
static int wm8960_hw_params(struct snd_pcm_substream *substream,
@@ -667,9 +725,9 @@ static int wm8960_hw_params(struct snd_pcm_substream *substream,
return -EINVAL;
}
+ wm8960->lrclk = params_rate(params);
/* Update filters for the new rate */
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
- wm8960->playback_fs = params_rate(params);
+ if (tx) {
wm8960_set_deemph(codec);
} else {
for (i = 0; i < ARRAY_SIZE(alc_rates); i++)
@@ -682,7 +740,23 @@ static int wm8960_hw_params(struct snd_pcm_substream *substream,
/* set iface */
snd_soc_write(codec, WM8960_IFACE1, iface);
- wm8960_configure_clocking(codec, tx, params_rate(params));
+ wm8960->is_stream_in_use[tx] = true;
+
+ if (snd_soc_codec_get_bias_level(codec) == SND_SOC_BIAS_ON &&
+ !wm8960->is_stream_in_use[!tx])
+ return wm8960_configure_clocking(codec);
+
+ return 0;
+}
+
+static int wm8960_hw_free(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
+ bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
+
+ wm8960->is_stream_in_use[tx] = false;
return 0;
}
@@ -702,6 +776,7 @@ static int wm8960_set_bias_level_out3(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
{
struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
+ u16 pm2 = snd_soc_read(codec, WM8960_POWER2);
int ret;
switch (level) {
@@ -721,11 +796,22 @@ static int wm8960_set_bias_level_out3(struct snd_soc_codec *codec,
}
}
+ ret = wm8960_configure_clocking(codec);
+ if (ret)
+ return ret;
+
/* Set VMID to 2x50k */
snd_soc_update_bits(codec, WM8960_POWER1, 0x180, 0x80);
break;
case SND_SOC_BIAS_ON:
+ /*
+ * If it's sysclk auto mode, and the pll is enabled,
+ * disable the pll
+ */
+ if (wm8960->clk_id == WM8960_SYSCLK_AUTO && (pm2 & 0x1))
+ wm8960_set_pll(codec, 0, 0);
+
if (!IS_ERR(wm8960->mclk))
clk_disable_unprepare(wm8960->mclk);
break;
@@ -780,6 +866,7 @@ static int wm8960_set_bias_level_capless(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
{
struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
+ u16 pm2 = snd_soc_read(codec, WM8960_POWER2);
int reg, ret;
switch (level) {
@@ -831,9 +918,21 @@ static int wm8960_set_bias_level_capless(struct snd_soc_codec *codec,
return ret;
}
}
+
+ ret = wm8960_configure_clocking(codec);
+ if (ret)
+ return ret;
+
break;
case SND_SOC_BIAS_ON:
+ /*
+ * If it's sysclk auto mode, and the pll is enabled,
+ * disable the pll
+ */
+ if (wm8960->clk_id == WM8960_SYSCLK_AUTO && (pm2 & 0x1))
+ wm8960_set_pll(codec, 0, 0);
+
if (!IS_ERR(wm8960->mclk))
clk_disable_unprepare(wm8960->mclk);
@@ -892,6 +991,28 @@ struct _pll_div {
u32 k:24;
};
+static bool is_pll_freq_available(unsigned int source, unsigned int target)
+{
+ unsigned int Ndiv;
+
+ if (source == 0 || target == 0)
+ return false;
+
+ /* Scale up target to PLL operating frequency */
+ target *= 4;
+ Ndiv = target / source;
+
+ if (Ndiv < 6) {
+ source >>= 1;
+ Ndiv = target / source;
+ }
+
+ if ((Ndiv < 6) || (Ndiv > 12))
+ return false;
+
+ return true;
+}
+
/* The size in bits of the pll divide multiplied by 10
* to allow rounding later */
#define FIXED_PLL_SIZE ((1 << 24) * 10)
@@ -943,10 +1064,9 @@ static int pll_factors(unsigned int source, unsigned int target,
return 0;
}
-static int wm8960_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id,
- int source, unsigned int freq_in, unsigned int freq_out)
+static int wm8960_set_pll(struct snd_soc_codec *codec,
+ unsigned int freq_in, unsigned int freq_out)
{
- struct snd_soc_codec *codec = codec_dai->codec;
u16 reg;
static struct _pll_div pll_div;
int ret;
@@ -986,6 +1106,20 @@ static int wm8960_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id,
return 0;
}
+static int wm8960_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id,
+ int source, unsigned int freq_in, unsigned int freq_out)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
+
+ wm8960->freq_in = freq_in;
+
+ if (pll_id == WM8960_SYSCLK_AUTO)
+ return 0;
+
+ return wm8960_set_pll(codec, freq_in, freq_out);
+}
+
static int wm8960_set_dai_clkdiv(struct snd_soc_dai *codec_dai,
int div_id, int div)
{
@@ -1043,11 +1177,14 @@ static int wm8960_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id,
snd_soc_update_bits(codec, WM8960_CLOCK1,
0x1, WM8960_SYSCLK_PLL);
break;
+ case WM8960_SYSCLK_AUTO:
+ break;
default:
return -EINVAL;
}
wm8960->sysclk = freq;
+ wm8960->clk_id = clk_id;
return 0;
}
@@ -1060,6 +1197,7 @@ static int wm8960_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id,
static const struct snd_soc_dai_ops wm8960_dai_ops = {
.hw_params = wm8960_hw_params,
+ .hw_free = wm8960_hw_free,
.digital_mute = wm8960_mute,
.set_fmt = wm8960_set_dai_fmt,
.set_clkdiv = wm8960_set_dai_clkdiv,
diff --git a/sound/soc/codecs/wm8960.h b/sound/soc/codecs/wm8960.h
index 2d8163d..ab3220d 100644
--- a/sound/soc/codecs/wm8960.h
+++ b/sound/soc/codecs/wm8960.h
@@ -82,6 +82,7 @@
#define WM8960_SYSCLK_MCLK (0 << 0)
#define WM8960_SYSCLK_PLL (1 << 0)
+#define WM8960_SYSCLK_AUTO (2 << 0)
#define WM8960_DAC_DIV_1 (0 << 3)
#define WM8960_DAC_DIV_1_5 (1 << 3)
--
2.5.0
More information about the Alsa-devel
mailing list