[alsa-devel] [PATCH v4 4/4] drm/i915: set proper N/CTS in modeset
libin.yang at intel.com
libin.yang at intel.com
Mon Aug 10 09:32:11 CEST 2015
From: Libin Yang <libin.yang at intel.com>
When modeset occurs and the TMDS frequency is set to some
speical value, the N/CTS need to be set manually if audio
is playing.
Signed-off-by: Libin Yang <libin.yang at intel.com>
---
drivers/gpu/drm/i915/i915_reg.h | 6 ++++++
drivers/gpu/drm/i915/intel_audio.c | 42 ++++++++++++++++++++++++++++++++++++++
2 files changed, 48 insertions(+)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index da2d128..85f3beb 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -7030,6 +7030,12 @@ enum skl_disp_power_wells {
_HSW_AUD_DIG_CNVT_2)
#define DIP_PORT_SEL_MASK 0x3
+#define _HSW_AUD_STR_DESC_1 0x65084
+#define _HSW_AUD_STR_DESC_2 0x65184
+#define AUD_STR_DESC(pipe) _PIPE(pipe, \
+ _HSW_AUD_STR_DESC_1, \
+ _HSW_AUD_STR_DESC_2)
+
#define _HSW_AUD_EDID_DATA_A 0x65050
#define _HSW_AUD_EDID_DATA_B 0x65150
#define HSW_AUD_EDID_DATA(pipe) _PIPE(pipe, \
diff --git a/drivers/gpu/drm/i915/intel_audio.c b/drivers/gpu/drm/i915/intel_audio.c
index eddf37f..082f96d 100644
--- a/drivers/gpu/drm/i915/intel_audio.c
+++ b/drivers/gpu/drm/i915/intel_audio.c
@@ -235,6 +235,9 @@ static void hsw_audio_codec_enable(struct drm_connector *connector,
const uint8_t *eld = connector->eld;
uint32_t tmp;
int len, i;
+ int cvt_idx;
+ int n_low, n_up, n;
+ int base_rate, mul, div, rate;
DRM_DEBUG_KMS("Enable audio codec on pipe %c, %u bytes ELD\n",
pipe_name(pipe), drm_eld_size(eld));
@@ -267,6 +270,21 @@ static void hsw_audio_codec_enable(struct drm_connector *connector,
tmp |= AUDIO_ELD_VALID(pipe);
I915_WRITE(HSW_AUD_PIN_ELD_CP_VLD, tmp);
+ if ((mode->clock == 297000) ||
+ (mode->clock == DIV_ROUND_UP(297000 * 1000, 1001))) {
+ tmp = I915_READ(HSW_AUD_PIPE_CONN_SEL_CTRL);
+ cvt_idx = (tmp >> pipe*8) & 0xff;
+ tmp = I915_READ(AUD_STR_DESC(cvt_idx));
+ base_rate = tmp & (1 << 14);
+ if (base_rate == 0)
+ rate = 48000;
+ else
+ rate = 44100;
+ mul = (tmp & (0x7 << 11)) + 1;
+ div = (tmp & (0x7 << 8)) + 1;
+ rate = rate * mul / div;
+ }
+
/* Enable timestamps */
tmp = I915_READ(HSW_AUD_CFG(pipe));
tmp &= ~AUD_CONFIG_N_VALUE_INDEX;
@@ -276,6 +294,30 @@ static void hsw_audio_codec_enable(struct drm_connector *connector,
tmp |= AUD_CONFIG_N_VALUE_INDEX;
else
tmp |= audio_config_hdmi_pixel_clock(mode);
+
+ if ((mode->clock != 297000) &&
+ (mode->clock != DIV_ROUND_UP(297000 * 1000, 1001))) {
+ tmp &= ~AUD_CONFIG_N_PROG_ENABLE;
+ } else {
+ for (i = 0; i < ARRAY_SIZE(aud_ncts); i++) {
+ if ((rate == aud_ncts[i].sample_rate) &&
+ (mode->clock == aud_ncts[i].clock)) {
+ n = aud_ncts[i].n;
+ break;
+ }
+ }
+ if (n != 0) {
+ tmp |= AUD_CONFIG_N_PROG_ENABLE;
+ n_low = n & 0xfff;
+ n_up = (n >> 12) & 0xff;
+ tmp |= AUD_CONFIG_N_PROG_ENABLE;
+ tmp &= ~AUD_CONFIG_UPPER_N_MASK;
+ tmp |= (n_up << AUD_CONFIG_UPPER_N_SHIFT);
+ tmp &= ~AUD_CONFIG_LOWER_N_MASK;
+ tmp |= (n_low << AUD_CONFIG_LOWER_N_SHIFT);
+ }
+ }
+
I915_WRITE(HSW_AUD_CFG(pipe), tmp);
}
--
1.9.1
More information about the Alsa-devel
mailing list