[alsa-devel] [PATCH v2 3/6] ASoC: Intel: Skylake: Add helpers for DSP module configuration
Vinod Koul
vinod.koul at intel.com
Sat Aug 1 16:10:41 CEST 2015
From: Jeeja KP <jeeja.kp at intel.com>
This adds helper functions to calculate parameters required for base module
format and copier module. A generic module is modelled by base module.
Copier module is responsible for getting/sending data to FE (host DMAs) and
BE (link HDA DMA, SSP, PDM)
This also ads module pin management helpers which help in finding pins to
use or freeing them up
Signed-off-by: Jeeja KP <jeeja.kp at intel.com>
Signed-off-by: Vinod Koul <vinod.koul at intel.com>
---
sound/soc/intel/skylake/skl-messages.c | 386 +++++++++++++++++++++++++++
sound/soc/intel/skylake/skl-topology.h | 251 +++++++++++++++++
sound/soc/intel/skylake/skl-tplg-interface.h | 88 ++++++
3 files changed, 725 insertions(+)
create mode 100644 sound/soc/intel/skylake/skl-topology.h
create mode 100644 sound/soc/intel/skylake/skl-tplg-interface.h
diff --git a/sound/soc/intel/skylake/skl-messages.c b/sound/soc/intel/skylake/skl-messages.c
index 7c07b76bf0bf..0ba13f1e8116 100644
--- a/sound/soc/intel/skylake/skl-messages.c
+++ b/sound/soc/intel/skylake/skl-messages.c
@@ -26,6 +26,8 @@
#include "skl.h"
#include "../common/sst-dsp.h"
#include "../common/sst-dsp-priv.h"
+#include "skl-topology.h"
+#include "skl-tplg-interface.h"
static int skl_alloc_dma_buf(struct device *dev,
struct snd_dma_buffer *dmab, size_t size)
@@ -131,3 +133,387 @@ int skl_resume_dsp(struct skl *skl)
return skl_dsp_wake(ctx->dsp);
}
+
+enum skl_bitdepth skl_get_bit_depth(int params)
+{
+ switch (params) {
+ case 8:
+ return SKL_DEPTH_8BIT;
+
+ case 16:
+ return SKL_DEPTH_16BIT;
+
+ case 24:
+ return SKL_DEPTH_24BIT;
+
+ case 32:
+ return SKL_DEPTH_32BIT;
+
+ default:
+ return SKL_DEPTH_INVALID;
+
+ }
+}
+
+static u32 skl_create_channel_map(enum skl_ch_cfg ch_cfg)
+{
+ u32 config;
+
+ switch (ch_cfg) {
+ case SKL_CH_CFG_MONO:
+ config = (0xFFFFFFF0 | SKL_CHANNEL_LEFT);
+ break;
+
+ case SKL_CH_CFG_STEREO:
+ config = (0xFFFFFF00 | SKL_CHANNEL_LEFT
+ | (SKL_CHANNEL_RIGHT << 4));
+ break;
+
+ case SKL_CH_CFG_2_1:
+ config = (0xFFFFF000 | SKL_CHANNEL_LEFT
+ | (SKL_CHANNEL_RIGHT << 4)
+ | (SKL_CHANNEL_LFE << 8));
+ break;
+
+ case SKL_CH_CFG_3_0:
+ config = (0xFFFFF000 | SKL_CHANNEL_LEFT
+ | (SKL_CHANNEL_CENTER << 4)
+ | (SKL_CHANNEL_RIGHT << 8));
+ break;
+
+ case SKL_CH_CFG_3_1:
+ config = (0xFFFF0000 | SKL_CHANNEL_LEFT
+ | (SKL_CHANNEL_CENTER << 4)
+ | (SKL_CHANNEL_RIGHT << 8)
+ | (SKL_CHANNEL_LFE << 12));
+ break;
+
+ case SKL_CH_CFG_QUATRO:
+ config = (0xFFFF0000 | SKL_CHANNEL_LEFT
+ | (SKL_CHANNEL_RIGHT << 4)
+ | (SKL_CHANNEL_LEFT_SURROUND << 8)
+ | (SKL_CHANNEL_RIGHT_SURROUND << 12));
+ break;
+
+ case SKL_CH_CFG_4_0:
+ config = (0xFFFF0000 | SKL_CHANNEL_LEFT
+ | (SKL_CHANNEL_CENTER << 4)
+ | (SKL_CHANNEL_RIGHT << 8)
+ | (SKL_CHANNEL_CENTER_SURROUND << 12));
+ break;
+
+ case SKL_CH_CFG_5_0:
+ config = (0xFFF00000 | SKL_CHANNEL_LEFT
+ | (SKL_CHANNEL_CENTER << 4)
+ | (SKL_CHANNEL_RIGHT << 8)
+ | (SKL_CHANNEL_LEFT_SURROUND << 12)
+ | (SKL_CHANNEL_RIGHT_SURROUND << 16));
+ break;
+
+ case SKL_CH_CFG_5_1:
+ config = (0xFF000000 | SKL_CHANNEL_CENTER
+ | (SKL_CHANNEL_LEFT << 4)
+ | (SKL_CHANNEL_RIGHT << 8)
+ | (SKL_CHANNEL_LEFT_SURROUND << 12)
+ | (SKL_CHANNEL_RIGHT_SURROUND << 16)
+ | (SKL_CHANNEL_LFE << 20));
+ break;
+
+ case SKL_CH_CFG_DUAL_MONO:
+ config = (0xFFFFFF00 | SKL_CHANNEL_LEFT
+ | (SKL_CHANNEL_LEFT << 4));
+ break;
+
+ case SKL_CH_CFG_I2S_DUAL_STEREO_0:
+ config = (0xFFFFFF00 | SKL_CHANNEL_LEFT
+ | (SKL_CHANNEL_RIGHT << 4));
+ break;
+
+ case SKL_CH_CFG_I2S_DUAL_STEREO_1:
+ config = (0xFFFF00FF | (SKL_CHANNEL_LEFT << 8)
+ | (SKL_CHANNEL_RIGHT << 12));
+ break;
+
+ default:
+ config = 0xFFFFFFFF;
+ break;
+
+ }
+
+ return config;
+}
+
+/*
+ * Each module in DSP expects a base module configuration, which consists of
+ * PCM format information, which we calculate in driver and resource values
+ * which are read from widget information passed through topology binary
+ * This is send when we create a module with INIT_INSTANCE IPC msg
+ */
+static void skl_set_base_module_format(struct skl_sst *ctx,
+ struct skl_module_cfg *mconfig,
+ struct skl_base_cfg *base_cfg)
+{
+ struct skl_module_fmt *format = &mconfig->in_fmt;
+
+ base_cfg->audio_fmt.number_of_channels = (u8)format->channels;
+
+ base_cfg->audio_fmt.s_freq = format->s_freq;
+ base_cfg->audio_fmt.bit_depth = format->bit_depth;
+ base_cfg->audio_fmt.valid_bit_depth = format->valid_bit_depth;
+ base_cfg->audio_fmt.ch_cfg = format->ch_cfg;
+
+ dev_dbg(ctx->dev, "bit_depth=%x valid_bd=%x ch_config=%x\n",
+ format->bit_depth, format->valid_bit_depth,
+ format->ch_cfg);
+
+ base_cfg->audio_fmt.channel_map = skl_create_channel_map(
+ base_cfg->audio_fmt.ch_cfg);
+
+ base_cfg->audio_fmt.interleaving = SKL_INTERLEAVING_PER_CHANNEL;
+
+ base_cfg->cps = mconfig->mcps;
+ base_cfg->ibs = mconfig->ibs;
+ base_cfg->obs = mconfig->obs;
+}
+
+/*
+ * Copies copier capabilities into copier module and updates copier module
+ * config size.
+ */
+static void skl_copy_copier_caps(struct skl_module_cfg *mconfig,
+ struct skl_cpr_cfg *cpr_mconfig)
+{
+ if (mconfig->formats_config.caps_size == 0)
+ return;
+
+ memcpy(cpr_mconfig->gtw_cfg.config_data,
+ mconfig->formats_config.caps,
+ mconfig->formats_config.caps_size);
+
+ cpr_mconfig->gtw_cfg.config_length =
+ (mconfig->formats_config.caps_size) / 4;
+}
+
+/*
+ * Calculate the gatewat settings required for copier module, type of
+ * gateway and index of gateway to use
+ */
+static void skl_setup_cpr_gateway_cfg(struct skl_sst *ctx,
+ struct skl_module_cfg *mconfig,
+ struct skl_cpr_cfg *cpr_mconfig)
+{
+ union skl_connector_node_id node_id = {0};
+ struct skl_pipe_params *params = mconfig->pipe->p_params;
+
+ switch (mconfig->dev_type) {
+ case SKL_DEVICE_BT:
+ node_id.node.dma_type =
+ (SKL_CONN_SOURCE == mconfig->hw_conn_type) ?
+ SKL_DMA_I2S_LINK_OUTPUT_CLASS :
+ SKL_DMA_I2S_LINK_INPUT_CLASS;
+ node_id.node.vindex = params->host_dma_id +
+ (mconfig->vbus_id << 3);
+ break;
+
+ case SKL_DEVICE_I2S:
+ node_id.node.dma_type =
+ (SKL_CONN_SOURCE == mconfig->hw_conn_type) ?
+ SKL_DMA_I2S_LINK_OUTPUT_CLASS :
+ SKL_DMA_I2S_LINK_INPUT_CLASS;
+ node_id.node.vindex = params->host_dma_id +
+ (mconfig->time_slot << 1) +
+ (mconfig->vbus_id << 3);
+ break;
+
+ case SKL_DEVICE_DMIC:
+ node_id.node.dma_type = SKL_DMA_DMIC_LINK_INPUT_CLASS;
+ node_id.node.vindex = mconfig->vbus_id +
+ (mconfig->time_slot);
+ break;
+
+ case SKL_DEVICE_HDALINK:
+ node_id.node.dma_type =
+ (SKL_CONN_SOURCE == mconfig->hw_conn_type) ?
+ SKL_DMA_HDA_LINK_OUTPUT_CLASS :
+ SKL_DMA_HDA_LINK_INPUT_CLASS;
+ node_id.node.vindex = params->link_dma_id;
+ break;
+
+ default:
+ node_id.node.dma_type =
+ (SKL_CONN_SOURCE == mconfig->hw_conn_type) ?
+ SKL_DMA_HDA_HOST_OUTPUT_CLASS :
+ SKL_DMA_HDA_HOST_INPUT_CLASS;
+ node_id.node.vindex = params->host_dma_id;
+ break;
+ }
+
+ cpr_mconfig->gtw_cfg.node_id = node_id.val;
+
+ if (SKL_CONN_SOURCE == mconfig->hw_conn_type)
+ cpr_mconfig->gtw_cfg.dma_buffer_size = 2 * mconfig->obs;
+ else
+ cpr_mconfig->gtw_cfg.dma_buffer_size = 2 * mconfig->ibs;
+
+ cpr_mconfig->cpr_feature_mask = 0;
+ cpr_mconfig->gtw_cfg.config_length = 0;
+
+ skl_copy_copier_caps(mconfig, cpr_mconfig);
+}
+
+static void skl_setup_out_format(struct skl_sst *ctx,
+ struct skl_module_cfg *mconfig,
+ struct skl_audio_data_format *out_fmt)
+{
+ struct skl_module_fmt *format = &mconfig->out_fmt;
+
+ out_fmt->number_of_channels = (u8)format->channels;
+ out_fmt->s_freq = format->s_freq;
+ out_fmt->bit_depth = format->bit_depth;
+ out_fmt->valid_bit_depth = format->valid_bit_depth;
+ out_fmt->ch_cfg = format->ch_cfg;
+
+ out_fmt->channel_map = skl_create_channel_map(out_fmt->ch_cfg);
+ out_fmt->interleaving = SKL_INTERLEAVING_PER_CHANNEL;
+
+ dev_dbg(ctx->dev, "copier out format chan=%d fre=%d bitdepth=%d\n",
+ out_fmt->number_of_channels, format->s_freq, format->bit_depth);
+}
+
+/*
+ * 'copier' is DSP internal module which copies data from Host DMA (HDA host
+ * dma) or link (hda link, SSP, PDM)
+ * Here we calculate the copier module parameters, like PCM format, output
+ * format, gateway settings
+ * copier_module_config is sent as input buffer with INIT_INSTANCE IPC msg
+ */
+static void skl_set_copier_format(struct skl_sst *ctx,
+ struct skl_module_cfg *mconfig,
+ struct skl_cpr_cfg *cpr_mconfig)
+{
+ struct skl_audio_data_format *out_fmt = &cpr_mconfig->out_fmt;
+ struct skl_base_cfg *base_cfg = (struct skl_base_cfg *)cpr_mconfig;
+
+ skl_set_base_module_format(ctx, mconfig, base_cfg);
+
+ skl_setup_out_format(ctx, mconfig, out_fmt);
+ skl_setup_cpr_gateway_cfg(ctx, mconfig, cpr_mconfig);
+}
+
+static u16 skl_get_module_param_size(struct skl_sst *ctx,
+ struct skl_module_cfg *mconfig)
+{
+ u16 param_size;
+
+ switch (mconfig->m_type) {
+ case SKL_MODULE_TYPE_COPIER:
+ param_size = sizeof(struct skl_cpr_cfg);
+ param_size += mconfig->formats_config.caps_size;
+ return param_size;
+
+ default:
+ /*
+ * return only base cfg when no specific module type is
+ * specified
+ */
+ return sizeof(struct skl_base_cfg);
+ }
+
+ return 0;
+}
+
+/*
+ * DSP firmware supports various modules like copier etc. These modules
+ * required various parameters to be calculated and sent for the module
+ * initialization to DSP. By default a generic module needs only base module
+ * format configuration
+ */
+static int skl_set_module_format(struct skl_sst *ctx,
+ struct skl_module_cfg *module_config,
+ u16 *module_config_size,
+ void **param_data)
+{
+ u16 param_size;
+
+ param_size = skl_get_module_param_size(ctx, module_config);
+
+ *param_data = kzalloc(param_size, GFP_KERNEL);
+ if (NULL == *param_data)
+ return -ENOMEM;
+
+ *module_config_size = param_size;
+
+ switch (module_config->m_type) {
+ case SKL_MODULE_TYPE_COPIER:
+ skl_set_copier_format(ctx, module_config, *param_data);
+ break;
+
+ default:
+ skl_set_base_module_format(ctx, module_config, *param_data);
+ break;
+
+ }
+
+ dev_dbg(ctx->dev, "Module type=%d config size: %d bytes\n",
+ module_config->id.module_id, param_size);
+ print_hex_dump(KERN_DEBUG, "Module params:", DUMP_PREFIX_OFFSET, 8, 4,
+ *param_data, param_size, false);
+ return 0;
+}
+
+static int skl_get_queue_index(struct skl_module_pin *mpin,
+ struct skl_module_inst_id id, int max)
+{
+ int i;
+
+ for (i = 0; i < max; i++) {
+ if (mpin[i].id.module_id == id.module_id &&
+ mpin[i].id.instance_id == id.instance_id)
+ return i;
+ }
+
+ return -EINVAL;
+}
+
+/*
+ * Allocates queue for each module.
+ * if dynamic, the pin_index is allocated 0 to max_pin.
+ * In static, the pin_index is fixed based on module_id and instance id
+ */
+static int skl_alloc_queue(struct skl_module_pin *mpin,
+ struct skl_module_inst_id id, int max)
+{
+ int i;
+
+ /*
+ * if pin in dynamic, find first free pin
+ * otherwise find match module and instance id pin as topology will
+ * ensure a unique pin is assigned to this so no need to
+ * allocate/free
+ */
+ for (i = 0; i < max; i++) {
+ if (mpin[i].is_dynamic) {
+ if (!mpin[i].in_use) {
+ mpin[i].in_use = true;
+ mpin[i].id.module_id = id.module_id;
+ mpin[i].id.instance_id = id.instance_id;
+ return i;
+ }
+ } else {
+ if (mpin[i].id.module_id == id.module_id &&
+ mpin[i].id.instance_id == id.instance_id)
+ return i;
+ }
+ }
+
+ return -EINVAL;
+}
+
+static void skl_free_queue(struct skl_module_pin *mpin, int q_index)
+{
+ if (mpin[q_index].is_dynamic) {
+ mpin[q_index].in_use = false;
+ mpin[q_index].id.module_id = 0;
+ mpin[q_index].id.instance_id = 0;
+ }
+}
diff --git a/sound/soc/intel/skylake/skl-topology.h b/sound/soc/intel/skylake/skl-topology.h
new file mode 100644
index 000000000000..6ba137a43e68
--- /dev/null
+++ b/sound/soc/intel/skylake/skl-topology.h
@@ -0,0 +1,251 @@
+/*
+ * skl_topology.h - Intel HDA Platform topology header file
+ *
+ * Copyright (C) 2014-15 Intel Corp
+ * Author: Jeeja KP <jeeja.kp at intel.com>
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ */
+
+#ifndef __SKL_TOPOLOGY_H__
+#define __SKL_TOPOLOGY_H__
+
+#include <linux/types.h>
+
+#include <sound/hdaudio_ext.h>
+#include <sound/soc.h>
+#include "skl.h"
+#include "skl-tplg-interface.h"
+
+#define BITS_PER_BYTE 8
+#define MAX_TS_GROUPS 8
+#define MAX_DMIC_TS_GROUPS 4
+#define MAX_FIXED_DMIC_PARAMS_SIZE 727
+
+/* Maximum number of coefficients up down mixer module */
+#define UP_DOWN_MIXER_MAX_COEFF 6
+
+enum skl_channel_index {
+ SKL_CHANNEL_LEFT = 0,
+ SKL_CHANNEL_RIGHT = 1,
+ SKL_CHANNEL_CENTER = 2,
+ SKL_CHANNEL_LEFT_SURROUND = 3,
+ SKL_CHANNEL_CENTER_SURROUND = 3,
+ SKL_CHANNEL_RIGHT_SURROUND = 4,
+ SKL_CHANNEL_LFE = 7,
+ SKL_CHANNEL_INVALID = 0xF,
+};
+
+enum skl_bitdepth {
+ SKL_DEPTH_8BIT = 8,
+ SKL_DEPTH_16BIT = 16,
+ SKL_DEPTH_24BIT = 24,
+ SKL_DEPTH_32BIT = 32,
+ SKL_DEPTH_INVALID
+};
+
+enum skl_interleaving {
+ /* [s1_ch1...s1_chN,...,sM_ch1...sM_chN] */
+ SKL_INTERLEAVING_PER_CHANNEL = 0,
+ /* [s1_ch1...sM_ch1,...,s1_chN...sM_chN] */
+ SKL_INTERLEAVING_PER_SAMPLE = 1,
+};
+
+enum skl_s_freq {
+ SKL_FS_8000 = 8000,
+ SKL_FS_11025 = 11025,
+ SKL_FS_12000 = 12000,
+ SKL_FS_16000 = 16000,
+ SKL_FS_22050 = 22050,
+ SKL_FS_24000 = 24000,
+ SKL_FS_32000 = 32000,
+ SKL_FS_44100 = 44100,
+ SKL_FS_48000 = 48000,
+ SKL_FS_64000 = 64000,
+ SKL_FS_88200 = 88200,
+ SKL_FS_96000 = 96000,
+ SKL_FS_128000 = 128000,
+ SKL_FS_176400 = 176400,
+ SKL_FS_192000 = 192000,
+ SKL_FS_INVALID
+};
+
+enum skl_widget_type {
+ SKL_WIDGET_VMIXER = 1,
+ SKL_WIDGET_MIXER = 2,
+ SKL_WIDGET_PGA = 3,
+ SKL_WIDGET_MUX = 4
+};
+
+struct skl_audio_data_format {
+ enum skl_s_freq s_freq;
+ enum skl_bitdepth bit_depth;
+ u32 channel_map;
+ enum skl_ch_cfg ch_cfg;
+ enum skl_interleaving interleaving;
+ u8 number_of_channels;
+ u8 valid_bit_depth;
+ u8 sample_type;
+ u8 reserved[1];
+} __packed;
+
+struct skl_base_cfg {
+ u32 cps;
+ u32 ibs;
+ u32 obs;
+ u32 is_pages;
+ struct skl_audio_data_format audio_fmt;
+};
+
+struct skl_cpr_gtw_cfg {
+ u32 node_id;
+ u32 dma_buffer_size;
+ u32 config_length;
+ /* not mandatory; required only for DMIC/I2S */
+ u32 config_data[1];
+} __packed;
+
+struct skl_cpr_cfg {
+ struct skl_base_cfg base_cfg;
+ struct skl_audio_data_format out_fmt;
+ u32 cpr_feature_mask;
+ struct skl_cpr_gtw_cfg gtw_cfg;
+} __packed;
+
+enum skl_dma_type {
+ SKL_DMA_HDA_HOST_OUTPUT_CLASS = 0,
+ SKL_DMA_HDA_HOST_INPUT_CLASS = 1,
+ SKL_DMA_HDA_HOST_INOUT_CLASS = 2,
+ SKL_DMA_HDA_LINK_OUTPUT_CLASS = 8,
+ SKL_DMA_HDA_LINK_INPUT_CLASS = 9,
+ SKL_DMA_HDA_LINK_INOUT_CLASS = 0xA,
+ SKL_DMA_DMIC_LINK_INPUT_CLASS = 0xB,
+ SKL_DMA_I2S_LINK_OUTPUT_CLASS = 0xC,
+ SKL_DMA_I2S_LINK_INPUT_CLASS = 0xD,
+};
+
+union skl_ssp_dma_node {
+ u8 val;
+ struct {
+ u8 dual_mono:1;
+ u8 time_slot:3;
+ u8 i2s_instance:4;
+ } dma_node;
+};
+
+union skl_connector_node_id {
+ u32 val;
+ struct {
+ u32 vindex:8;
+ u32 dma_type:4;
+ u32 rsvd:20;
+ } node;
+};
+
+struct skl_module_fmt {
+ u32 channels;
+ u32 s_freq;
+ u32 bit_depth;
+ u32 valid_bit_depth;
+ u32 ch_cfg;
+};
+
+struct skl_module_inst_id {
+ u32 module_id;
+ u32 instance_id;
+};
+
+struct skl_module_pin {
+ struct skl_module_inst_id id;
+ u8 pin_index;
+ bool is_dynamic;
+ bool in_use;
+};
+
+struct skl_specific_cfg {
+ u32 caps_size;
+ u32 *caps;
+};
+
+enum skl_pipe_state {
+ SKL_PIPE_INVALID = 0,
+ SKL_PIPE_CREATED = 1,
+ SKL_PIPE_PAUSED = 2,
+ SKL_PIPE_STARTED = 3
+};
+
+struct skl_pipe_module {
+ struct snd_soc_dapm_widget *w;
+ struct list_head node;
+};
+
+struct skl_pipe_params {
+ u8 host_dma_id;
+ u8 link_dma_id;
+ u32 ch;
+ u32 s_freq;
+ u32 s_fmt;
+ u8 linktype;
+ int stream;
+};
+
+struct skl_pipe {
+ u8 ppl_id;
+ u8 pipe_priority;
+ u16 conn_type;
+ u32 memory_pages;
+ struct skl_pipe_params *p_params;
+ enum skl_pipe_state state;
+ struct list_head w_list;
+};
+
+enum skl_module_state {
+ SKL_MODULE_UNINIT = 0,
+ SKL_MODULE_INIT_DONE = 1,
+ SKL_MODULE_LOADED = 2,
+ SKL_MODULE_UNLOADED = 3,
+ SKL_MODULE_BIND_DONE = 4
+};
+
+struct skl_module_cfg {
+ struct skl_module_inst_id id;
+ struct skl_module_fmt in_fmt;
+ struct skl_module_fmt out_fmt;
+ u8 max_in_queue;
+ u8 max_out_queue;
+ u8 in_queue_mask;
+ u8 out_queue_mask;
+ u8 in_queue;
+ u8 out_queue;
+ u32 mcps;
+ u32 ibs;
+ u32 obs;
+ u8 is_loadable;
+ u8 core_id;
+ u8 dev_type;
+ u8 dma_id;
+ u8 time_slot;
+ u32 params_fixup;
+ u32 converter;
+ u32 vbus_id;
+ struct skl_module_pin *m_in_pin;
+ struct skl_module_pin *m_out_pin;
+ enum skl_module_type m_type;
+ enum skl_hw_conn_type hw_conn_type;
+ enum skl_module_state m_state;
+ struct skl_pipe *pipe;
+ struct skl_specific_cfg formats_config;
+};
+enum skl_bitdepth skl_get_bit_depth(int params);
+#endif
diff --git a/sound/soc/intel/skylake/skl-tplg-interface.h b/sound/soc/intel/skylake/skl-tplg-interface.h
new file mode 100644
index 000000000000..a50689825bca
--- /dev/null
+++ b/sound/soc/intel/skylake/skl-tplg-interface.h
@@ -0,0 +1,88 @@
+/*
+ * skl-tplg-interface.h - Intel DSP FW private data interface
+ *
+ * Copyright (C) 2015 Intel Corp
+ * Author: Jeeja KP <jeeja.kp at intel.com>
+ * Nilofer, Samreen <samreen.nilofer at intel.com>
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __HDA_TPLG_INTERFACE_H__
+#define __HDA_TPLG_INTERFACE_H__
+
+/**
+ * enum skl_ch_cfg - channel configuration
+ *
+ * @SKL_CH_CFG_MONO: One channel only
+ * @SKL_CH_CFG_STEREO: L & R
+ * @SKL_CH_CFG_2_1: L, R & LFE
+ * @SKL_CH_CFG_3_0: L, C & R
+ * @SKL_CH_CFG_3_1: L, C, R & LFE
+ * @SKL_CH_CFG_QUATRO: L, R, Ls & Rs
+ * @SKL_CH_CFG_4_0: L, C, R & Cs
+ * @SKL_CH_CFG_5_0: L, C, R, Ls & Rs
+ * @SKL_CH_CFG_5_1: L, C, R, Ls, Rs & LFE
+ * @SKL_CH_CFG_DUAL_MONO: One channel replicated in two
+ * @SKL_CH_CFG_I2S_DUAL_STEREO_0: Stereo(L,R) in 4 slots, 1st stream:[ L, R, -, - ]
+ * @SKL_CH_CFG_I2S_DUAL_STEREO_1: Stereo(L,R) in 4 slots, 2nd stream:[ -, -, L, R ]
+ * @SKL_CH_CFG_INVALID: Invalid
+ */
+enum skl_ch_cfg {
+ SKL_CH_CFG_MONO = 0,
+ SKL_CH_CFG_STEREO = 1,
+ SKL_CH_CFG_2_1 = 2,
+ SKL_CH_CFG_3_0 = 3,
+ SKL_CH_CFG_3_1 = 4,
+ SKL_CH_CFG_QUATRO = 5,
+ SKL_CH_CFG_4_0 = 6,
+ SKL_CH_CFG_5_0 = 7,
+ SKL_CH_CFG_5_1 = 8,
+ SKL_CH_CFG_DUAL_MONO = 9,
+ SKL_CH_CFG_I2S_DUAL_STEREO_0 = 10,
+ SKL_CH_CFG_I2S_DUAL_STEREO_1 = 11,
+ SKL_CH_CFG_INVALID
+};
+
+enum skl_module_type {
+ SKL_MODULE_TYPE_MIXER = 0,
+ SKL_MODULE_TYPE_COPIER,
+ SKL_MODULE_TYPE_UPDWMIX,
+ SKL_MODULE_TYPE_SRCINT
+};
+
+enum skl_core_affinity {
+ SKL_AFFINITY_CORE_0 = 0,
+ SKL_AFFINITY_CORE_1,
+ SKL_AFFINITY_CORE_MAX
+};
+
+enum skl_pipe_conn_type {
+ SKL_PIPE_CONN_TYPE_NONE = 0,
+ SKL_PIPE_CONN_TYPE_FE,
+ SKL_PIPE_CONN_TYPE_BE
+};
+
+enum skl_hw_conn_type {
+ SKL_CONN_NONE = 0,
+ SKL_CONN_SOURCE = 1,
+ SKL_CONN_SINK = 2
+};
+
+enum skl_dev_type {
+ SKL_DEVICE_BT = 0x0,
+ SKL_DEVICE_DMIC = 0x1,
+ SKL_DEVICE_I2S = 0x2,
+ SKL_DEVICE_SLIMBUS = 0x3,
+ SKL_DEVICE_HDALINK = 0x4,
+ SKL_DEVICE_NONE
+};
+#endif
--
1.9.1
More information about the Alsa-devel
mailing list