[alsa-devel] Possible fix for snd-hda-intel model=no-jd failing since ~linux-3.9-rc1

[Takashi Iwai]

At Thu, 11 Sep 2014 11:07:10 +0200,
David Henningsson wrote:
> 
> 
> 
> On 2014-09-11 09:47, Adam Richter wrote:
> > Hi.
> 
> Hi Adam,
> 
> Interesting problem. Could you submit alsa-info ( 
> http://www.alsa-project.org/alsa-info.sh ) and point us to it? It makes 
> it possible to run the code in an emulator.
> 
> > This is a bug and suggested temporary fix that I originally posted to the linux-sound mailing list about a month and a half ago.  I am grateful to Takashi Awai for informing me after my follow-up inquiry about it today that I should submit it to the alsa-devel mailing list instead.  Please feel free to redirect me further if appropriate.  I did not notice any contact information for sound/pci/hda in
> > linux-3.16-rc4/MAINATINERS.
> >
> > Anyhow, here is the bug report and a one line proposed temporary fix.
> >
> >
> > The "model=no-jd" argument has not initialized the analog audio output jack correctly for me since linux-3.9-rc1 (if I recall correctly) through linux-3.17-rc4, although I have not tried every release candidate in between.
> 
> A lot of things changed with 3.9, so that makes sense. Btw, 
> "model=no-jd" works only for specific machines. You can use the hint 
> "jack-detect=0" instead.
> 
> > The symptom is that, on a computer with an analog audio output jack
> > that has incorrect jack sense (a hardware bug), audio output is completely muted until I physically replug the cable, even though I specified "model=no-jd" as an argument to the snd-hda-intel kernel module, which is supposed to cause the kernel to ignore the jack sense reported by hardware and just drive the audio output even if the hardware jack sense indicates nothing is plugged in.  This problem did not occur until approximate Linux 3.9-rc1.
> >
> > I have found a few single line workarounds that work, of which my
> > favorite is the following (also attached to this email, in case any
> > mailer subjects this message to reformatting), because it does not add
> > code to anything that gets called frequently.
> >
> > --- linux-3.17.0-rc4-64bit/sound/pci/hda/hda_jack.c.orig    2014-09-07 16:09:43.000000000 -0700
> > +++ linux-3.17.0-rc4-64bit/sound/pci/hda/hda_jack.c    2014-09-10 18:41:53.422900040 -0700
> > @@ -106,6 +106,7 @@ snd_hda_jack_tbl_new(struct hda_codec *c
> >       jack->nid = nid;
> >       jack->jack_dirty = 1;
> >       jack->tag = codec->jacktbl.used;
> > +    jack->phantom_jack = codec->no_jack_detect;
> >       return jack;
> >   }
> >   EXPORT_SYMBOL_GPL(snd_hda_jack_tbl_new);
> >
> >
> > Signed-off-by: Adam J. Richter <adam_richter2004 at yahoo.com>
> >
> >
> > I consider this a workaround rather than than a perfect fix, because I
> > think the underlying problem seems to be some kind of initialization
> > order issue that I don't fully understand.  Basically, by the time
> > jack->phantom_jack was being set, some caller had already called
> > jack_detect_update(), which loaded the incorrect jack sense result
> > from hardware and cleared jack->jack_dirty, so the jack sense would
> > not be set again.  At least that is what I think the underlying
> > problem probably is.
> >
> > Also, if a change like this is to be integrated, I'd like to know if
> > it might be better for the line that I added to be:
> >
> >            jack->phantom_jack = !is_jack_detectable(codec, nid);
> 
> Yes, this would probably be better.
> 
> I guess that somehow snd_hda_jack_enable_callback gets called for the 
> phantom jack, but I'm not sure exactly how (alsa-info would help).
> 
> Nevertheless I'm attaching a patch. I assume it also resolves your problem?
> 
> Takashi, what do you think of the attached patch?

I'd comment only after I see alsa-info.sh output.  The patch above
just makes it phantom without changing the name suffix, which looks
bogus.  So, I prefer fixing in a better way.

Of course, more important to know why it happens and how.


Takashi