[alsa-devel] [PATCH 4/5] ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards
Dmitry Lavnikevich
d.lavnikevich at sam-solutions.com
Wed Sep 10 15:46:48 CEST 2014
Audio on phyFLEX boards is presented by tlv320aic3007 codec connected over SSI
interface.
Signed-off-by: Dmitry Lavnikevich <d.lavnikevich at sam-solutions.com>
---
arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi | 59 +++++++++++++++++++++++++++-
arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 15 +++++++
2 files changed, 72 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi
index f1bdcae5b97d..8f778fe8c0b7 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi
@@ -13,6 +13,46 @@
chosen {
linux,stdout-path = &uart4;
};
+
+ regulators {
+ sound_1v8: regulator at 2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "i2s-audio-1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+ sound_3v3: regulator at 3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "i2s-audio-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+
+ sound {
+ compatible = "fsl,imx-audio-tlv320aic3x";
+ model = "imx6q-phyflex-tlv320aic3007";
+ ssi-controller = <&ssi2>;
+ audio-codec = <&codec>;
+ audio-routing =
+ "Line Out", "LLOUT",
+ "Line Out", "RLOUT",
+ "Speaker", "SPOP",
+ "Speaker", "SPOM",
+ "Headphone Jack", "HPLOUT",
+ "Headphone Jack", "HPROUT",
+ "MIC3L", "Mic Jack",
+ "MIC3R", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "LINE1L", "Line In",
+ "LINE1R", "Line In";
+ mux-int-port = <2>;
+ mux-ext-port = <5>;
+ };
};
&fec {
@@ -27,12 +67,27 @@
status = "okay";
};
+&ssi2 {
+ fsl,mode = "i2s-slave";
+ status = "okay";
+};
+
+&audmux {
+ status = "okay";
+};
+
&i2c2 {
status = "okay";
- tlv320 at 18 {
- compatible = "ti,tlv320aic3x";
+ codec: tlv320 at 18 {
+ compatible = "ti,tlv320aic3007";
reg = <0x18>;
+ ai3x-micbias-vg = <2>;
+
+ AVDD-supply = <&sound_3v3>;
+ IOVDD-supply = <&sound_3v3>;
+ DRVDD-supply = <&sound_3v3>;
+ DVDD-supply = <&sound_1v8>;
};
stmpe at 41 {
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index a927e88ccc98..1c4464dcb497 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -58,6 +58,12 @@
};
};
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "disabled";
+};
+
&ecspi3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi3>;
@@ -319,6 +325,15 @@
MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000
>;
};
+
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT16__AUD5_TXC 0x130b0
+ MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS 0x130b0
+ MX6QDL_PAD_DISP0_DAT17__AUD5_TXD 0x110b0
+ MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0
+ >;
+ };
};
};
--
2.1.0
More information about the Alsa-devel
mailing list