[alsa-devel] [PATCHv3 7/9] WM8971 improves the function of regmap

Charles Keepax ckeepax at opensource.wolfsonmicro.com
Tue Sep 2 13:03:50 CEST 2014


On Tue, Sep 02, 2014 at 11:27:48AM +0800, Xavier Hsu wrote:
> This patch improves WM8971.
> We modify the function of regmap.
> 
> Any comments about improving the patch are welcome.
> Thanks.

Again move this stuff to after the ---

> 
> Signed-off-by: Xavier Hsu <xavier.hsu at linaro.org>
> Signed-off-by: Andy Green <andy.green at linaro.org>
> ---
>  sound/soc/codecs/wm8971.c |   26 +++++++++++++++++++++-----
>  1 file changed, 21 insertions(+), 5 deletions(-)
> 
> diff --git a/sound/soc/codecs/wm8971.c b/sound/soc/codecs/wm8971.c
> index 68b4f52..95e7c39 100755
> --- a/sound/soc/codecs/wm8971.c
> +++ b/sound/soc/codecs/wm8971.c
> @@ -38,6 +38,7 @@
>  
>  /* codec private data */
>  struct wm8971_priv {
> +	struct regmap *regmap;
>  	unsigned int sysclk;
>  	struct snd_pcm_hw_constraint_list *sysclk_constraints;
>  	int playback_fs;
> @@ -716,6 +717,7 @@ static int wm8971_mute(struct snd_soc_dai *dai, int mute)
>  static int wm8971_set_bias_level(struct snd_soc_codec *codec,
>  				 enum snd_soc_bias_level level)
>  {
> +	struct wm8971_priv *wm8971 = snd_soc_codec_get_drvdata(codec);
>  	u16 pwr_reg = snd_soc_read(codec, WM8971_PWR1) & 0xfe3e;
>  
>  	switch (level) {
> @@ -727,7 +729,7 @@ static int wm8971_set_bias_level(struct snd_soc_codec *codec,
>  		break;
>  	case SND_SOC_BIAS_STANDBY:
>  		if (codec->dapm.bias_level == SND_SOC_BIAS_OFF)
> -			snd_soc_cache_sync(codec);
> +			regcache_sync(wm8971->regmap);
>  
>  		/* mute dac and set vmid to 500k, enable VREF */
>  		snd_soc_write(codec, WM8971_PWR1, pwr_reg | 0x0140);
> @@ -774,7 +776,11 @@ static struct snd_soc_dai_driver wm8971_dai = {
>  
>  static int wm8971_suspend(struct snd_soc_codec *codec)
>  {
> +	struct wm8971_priv *wm8971 = snd_soc_codec_get_drvdata(codec);
> +
>  	wm8971_set_bias_level(codec, SND_SOC_BIAS_OFF);
> +	regcache_mark_dirty(wm8971->regmap);
> +
>  	return 0;
>  }
>  
> @@ -797,9 +803,12 @@ static int wm8971_resume(struct snd_soc_codec *codec)
>  
>  static int wm8971_probe(struct snd_soc_codec *codec)
>  {
> +	struct wm8971_priv *wm8971 = snd_soc_codec_get_drvdata(codec);
>  	int ret = 0;
>  	u16 reg;
>  
> +	codec->control_data = wm8971->regmap;
> +

I don't think this is necessary anymore? Now you have the
get_regmap callback.

>  	wm8971_reset(codec);
>  
>  	/* charge output caps - set vmid to 5k for quick power up */
> @@ -830,12 +839,20 @@ static int wm8971_remove(struct snd_soc_codec *codec)
>  	return 0;
>  }
>  
> +struct regmap *wm8971_get_regmap(struct device *dev)
> +{
> +	struct wm8971_priv *priv = dev_get_drvdata(dev);
> +
> +	return priv->regmap;
> +}

This function should be marked static.

> +
>  static struct snd_soc_codec_driver soc_codec_dev_wm8971 = {
>  	.probe =	wm8971_probe,
>  	.remove =	wm8971_remove,
>  	.suspend =	wm8971_suspend,
>  	.resume =	wm8971_resume,
>  	.set_bias_level = wm8971_set_bias_level,
> +	.get_regmap =	wm8971_get_regmap,
>  
>  	.controls = wm8971_snd_controls,
>  	.num_controls = ARRAY_SIZE(wm8971_snd_controls),
> @@ -859,7 +876,6 @@ static int wm8971_i2c_probe(struct i2c_client *i2c,
>  			    const struct i2c_device_id *id)
>  {
>  	struct wm8971_priv *wm8971;
> -	struct regmap *regmap;
>  	int ret;
>  
>  	wm8971 = devm_kzalloc(&i2c->dev, sizeof(struct wm8971_priv),
> @@ -867,9 +883,9 @@ static int wm8971_i2c_probe(struct i2c_client *i2c,
>  	if (wm8971 == NULL)
>  		return -ENOMEM;
>  
> -	regmap = devm_regmap_init_i2c(i2c, &wm8971_regmap);
> -	if (IS_ERR(regmap))
> -		return PTR_ERR(regmap);
> +	wm8971->regmap = devm_regmap_init_i2c(i2c, &wm8971_regmap);
> +	if (IS_ERR(wm8971->regmap))
> +		return PTR_ERR(wm8971->regmap);
>  
>  	i2c_set_clientdata(i2c, wm8971);
>  
> -- 

Thanks,
Charles


More information about the Alsa-devel mailing list