[alsa-devel] [PATCH 08/15] ARM: sa1100: make collie use new locomo drivers
Dmitry Eremin-Solenikov
dbaryshkov at gmail.com
Tue Oct 28 01:02:01 CET 2014
Switch collie to new mfd-based locomo driver.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov at gmail.com>
---
arch/arm/mach-sa1100/Kconfig | 1 -
arch/arm/mach-sa1100/collie.c | 112 +++++++++++++++--------------
arch/arm/mach-sa1100/include/mach/collie.h | 25 ++++++-
3 files changed, 79 insertions(+), 59 deletions(-)
diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig
index c6f6ed1..37af126 100644
--- a/arch/arm/mach-sa1100/Kconfig
+++ b/arch/arm/mach-sa1100/Kconfig
@@ -48,7 +48,6 @@ endchoice
config SA1100_COLLIE
bool "Sharp Zaurus SL5500"
# FIXME: select ARM_SA11x0_CPUFREQ
- select SHARP_LOCOMO
select SHARP_PARAM
select SHARP_SCOOP
help
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index 108939f..43d3291 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -24,6 +24,7 @@
#include <linux/platform_data/sa11x0-serial.h>
#include <linux/platform_device.h>
#include <linux/mfd/ucb1x00.h>
+#include <linux/mfd/locomo.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/timer.h>
@@ -47,7 +48,6 @@
#include <asm/hardware/scoop.h>
#include <asm/mach/sharpsl_param.h>
-#include <asm/hardware/locomo.h>
#include <linux/platform_data/mfd-mcp-sa11x0.h>
#include <mach/irqs.h>
@@ -189,36 +189,54 @@ static struct platform_device collie_power_device = {
.num_resources = ARRAY_SIZE(collie_power_resource),
};
-#ifdef CONFIG_SHARP_LOCOMO
/*
* low-level UART features.
*/
-struct platform_device collie_locomo_device;
+static struct gpio collie_uart_gpio[] = {
+ { COLLIE_GPIO_CTS, GPIOF_IN, "CTS" },
+ { COLLIE_GPIO_RTS, GPIOF_OUT_INIT_LOW, "RTS" },
+ { COLLIE_GPIO_DTR, GPIOF_OUT_INIT_LOW, "DTR" },
+ { COLLIE_GPIO_DSR, GPIOF_IN, "DSR" },
+};
+
+static bool collie_uart_gpio_ok;
static void collie_uart_set_mctrl(struct uart_port *port, u_int mctrl)
{
- if (mctrl & TIOCM_RTS)
- locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_RTS, 0);
- else
- locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_RTS, 1);
-
- if (mctrl & TIOCM_DTR)
- locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_DTR, 0);
- else
- locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_DTR, 1);
+ if (!collie_uart_gpio_ok) {
+ int rc = gpio_request_array(collie_uart_gpio,
+ ARRAY_SIZE(collie_uart_gpio));
+ if (rc)
+ pr_err("collie_uart_set_mctrl: gpio request %d\n", rc);
+ else
+ collie_uart_gpio_ok = true;
+ }
+
+ if (collie_uart_gpio_ok) {
+ gpio_set_value(COLLIE_GPIO_RTS, !(mctrl & TIOCM_RTS));
+ gpio_set_value(COLLIE_GPIO_DTR, !(mctrl & TIOCM_DTR));
+ }
}
static u_int collie_uart_get_mctrl(struct uart_port *port)
{
int ret = TIOCM_CD;
- unsigned int r;
- r = locomo_gpio_read_output(&collie_locomo_device.dev, LOCOMO_GPIO_CTS & LOCOMO_GPIO_DSR);
- if (r == -ENODEV)
+ if (!collie_uart_gpio_ok) {
+ int rc = gpio_request_array(collie_uart_gpio,
+ ARRAY_SIZE(collie_uart_gpio));
+ if (rc)
+ pr_err("collie_uart_get_mctrl: gpio request %d\n", rc);
+ else
+ collie_uart_gpio_ok = true;
+ }
+
+ if (!collie_uart_gpio_ok)
return ret;
- if (r & LOCOMO_GPIO_CTS)
+
+ if (gpio_get_value(COLLIE_GPIO_CTS))
ret |= TIOCM_CTS;
- if (r & LOCOMO_GPIO_DSR)
+ if (gpio_get_value(COLLIE_GPIO_DSR))
ret |= TIOCM_DSR;
return ret;
@@ -229,33 +247,6 @@ static struct sa1100_port_fns collie_port_fns __initdata = {
.get_mctrl = collie_uart_get_mctrl,
};
-static int collie_uart_probe(struct locomo_dev *dev)
-{
- return 0;
-}
-
-static int collie_uart_remove(struct locomo_dev *dev)
-{
- return 0;
-}
-
-static struct locomo_driver collie_uart_driver = {
- .drv = {
- .name = "collie_uart",
- },
- .devid = LOCOMO_DEVID_UART,
- .probe = collie_uart_probe,
- .remove = collie_uart_remove,
-};
-
-static int __init collie_uart_init(void)
-{
- return locomo_driver_register(&collie_uart_driver);
-}
-device_initcall(collie_uart_init);
-
-#endif
-
static struct resource locomo_resources[] = {
[0] = DEFINE_RES_MEM(0x40000000, SZ_8K),
@@ -263,14 +254,28 @@ static struct resource locomo_resources[] = {
};
static struct locomo_platform_data locomo_info = {
- .irq_base = IRQ_BOARD_START,
+ .gpio_data = {
+ .gpio_base = COLLIE_LOCOMO_GPIO_BASE,
+ },
+ .lcd_data = {
+ .comadj = 128,
+ .gpio_lcd_vsha_on = COLLIE_GPIO_LCD_VSHA_ON,
+ .gpio_lcd_vshd_on = COLLIE_GPIO_LCD_VSHD_ON,
+ .gpio_lcd_vee_on = COLLIE_GPIO_LCD_VEE_ON,
+ .gpio_lcd_mod = COLLIE_GPIO_LCD_MOD,
+ },
+ .bl_data = {
+ .gpio_fl_vr = COLLIE_GPIO_FL_VR,
+ },
+ .gpio_amp1_on = COLLIE_GPIO_AMP1_ON,
+ .gpio_amp2_on = COLLIE_GPIO_AMP2_ON,
};
-struct platform_device collie_locomo_device = {
+static struct platform_device collie_locomo_device = {
.name = "locomo",
.id = 0,
.dev = {
- .platform_data = &locomo_info,
+ .platform_data = &locomo_info,
},
.num_resources = ARRAY_SIZE(locomo_resources),
.resource = locomo_resources,
@@ -385,10 +390,6 @@ static struct sa1100fb_mach_info collie_lcd_info = {
.lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
.lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
-
-#ifdef CONFIG_BACKLIGHT_LOCOMO
- .lcd_power = locomolcd_power
-#endif
};
static void __init collie_init(void)
@@ -420,6 +421,8 @@ static void __init collie_init(void)
GPSR |= _COLLIE_GPIO_UCB1x00_RESET;
+ sharpsl_save_param();
+
collie_power_resource[0].start = gpio_to_irq(COLLIE_GPIO_AC_IN);
collie_power_resource[0].end = gpio_to_irq(COLLIE_GPIO_AC_IN);
@@ -428,6 +431,9 @@ static void __init collie_init(void)
platform_scoop_config = &collie_pcmcia_config;
+ if (sharpsl_param.comadj != -1)
+ locomo_info.lcd_data.comadj = sharpsl_param.comadj;
+
ret = platform_add_devices(devices, ARRAY_SIZE(devices));
if (ret) {
printk(KERN_WARNING "collie: Unable to register LoCoMo device\n");
@@ -438,8 +444,6 @@ static void __init collie_init(void)
ARRAY_SIZE(collie_flash_resources));
sa11x0_register_mcp(&collie_mcp_data);
sa11x0_register_irda(&collie_ir_data);
-
- sharpsl_save_param();
}
static struct map_desc collie_io_desc[] __initdata = {
@@ -461,9 +465,7 @@ static void __init collie_map_io(void)
sa1100_map_io();
iotable_init(collie_io_desc, ARRAY_SIZE(collie_io_desc));
-#ifdef CONFIG_SHARP_LOCOMO
sa1100_register_uart_fns(&collie_port_fns);
-#endif
sa1100_register_uart(0, 3);
sa1100_register_uart(1, 1);
}
diff --git a/arch/arm/mach-sa1100/include/mach/collie.h b/arch/arm/mach-sa1100/include/mach/collie.h
index b478ca1..22a7c7e 100644
--- a/arch/arm/mach-sa1100/include/mach/collie.h
+++ b/arch/arm/mach-sa1100/include/mach/collie.h
@@ -24,12 +24,12 @@ extern void locomolcd_power(int on);
#define COLLIE_SCP_MUTE_L SCOOP_GPCR_PA14
#define COLLIE_SCP_MUTE_R SCOOP_GPCR_PA15
#define COLLIE_SCP_5VON SCOOP_GPCR_PA16
-#define COLLIE_SCP_AMP_ON SCOOP_GPCR_PA17
+#define COLLIE_GPIO_AMP2_ON (COLLIE_SCOOP_GPIO_BASE + 6)
#define COLLIE_GPIO_VPEN (COLLIE_SCOOP_GPIO_BASE + 7)
#define COLLIE_SCP_LB_VOL_CHG SCOOP_GPCR_PA19
#define COLLIE_SCOOP_IO_DIR (COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \
- COLLIE_SCP_5VON | COLLIE_SCP_AMP_ON | \
+ COLLIE_SCP_5VON | \
COLLIE_SCP_LB_VOL_CHG)
#define COLLIE_SCOOP_IO_OUT (COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R)
@@ -81,7 +81,7 @@ extern void locomolcd_power(int on);
#define COLLIE_TC35143_GPIO_TBL_CHK UCB_IO_1
#define COLLIE_TC35143_GPIO_VPEN_ON UCB_IO_2
#define COLLIE_GPIO_IR_ON (COLLIE_TC35143_GPIO_BASE + 3)
-#define COLLIE_TC35143_GPIO_AMP_ON UCB_IO_4
+#define COLLIE_GPIO_AMP1_ON (COLLIE_TC35143_GPIO_BASE + 4)
#define COLLIE_TC35143_GPIO_VERSION1 UCB_IO_5
#define COLLIE_TC35143_GPIO_FS8KLPF UCB_IO_5
#define COLLIE_TC35143_GPIO_BUZZER_BIAS UCB_IO_6
@@ -92,4 +92,23 @@ extern void locomolcd_power(int on);
#define COLLIE_TC35143_GPIO_OUT (UCB_IO_1 | UCB_IO_3 | UCB_IO_4 \
| UCB_IO_6)
+/* GPIOs on LoCoMo GA */
+#define COLLIE_LOCOMO_GPIO_BASE (GPIO_MAX + 23)
+#define COLLIE_GPIO_RTS (COLLIE_LOCOMO_GPIO_BASE + 0)
+#define COLLIE_GPIO_CTS (COLLIE_LOCOMO_GPIO_BASE + 1)
+#define COLLIE_GPIO_DSR (COLLIE_LOCOMO_GPIO_BASE + 2)
+#define COLLIE_GPIO_DTR (COLLIE_LOCOMO_GPIO_BASE + 3)
+#define COLLIE_GPIO_LCD_VSHA_ON (COLLIE_LOCOMO_GPIO_BASE + 4)
+#define COLLIE_GPIO_LCD_VSHD_ON (COLLIE_LOCOMO_GPIO_BASE + 5)
+#define COLLIE_GPIO_LCD_VEE_ON (COLLIE_LOCOMO_GPIO_BASE + 6)
+#define COLLIE_GPIO_LCD_MOD (COLLIE_LOCOMO_GPIO_BASE + 7)
+#define COLLIE_LOCOMO_GPIO_DAC_ON LOCOMO_GPIO(8)
+#define COLLIE_GPIO_FL_VR (COLLIE_LOCOMO_GPIO_BASE + 9)
+#define COLLIE_LOCOMO_GPIO_DAC_SDATA LOCOMO_GPIO(10)
+#define COLLIE_LOCOMO_GPIO_DAC_SCK LOCOMO_GPIO(11)
+#define COLLIE_LOCOMO_GPIO_DAC_SLOAD LOCOMO_GPIO(12)
+#define COLLIE_LOCOMO_GPIO_CARD_DETECT LOCOMO_GPIO(13)
+#define COLLIE_LOCOMO_GPIO_WRITE_PROT LOCOMO_GPIO(14)
+#define COLLIE_LOCOMO_GPIO_CARD_POWER LOCOMO_GPIO(15)
+
#endif
--
2.1.1
More information about the Alsa-devel
mailing list