[alsa-devel] [PATCH 2/2] usb: Add mode select quirk for Denon/Marantz DACs
Jurgen Kramer
gtmkramer at xs4all.nl
Fri Nov 28 14:04:31 CET 2014
Denon/Marantz USB DACs need a specific vendor command to switch between PCM and
DSD mode. This patch adds a new quirk function to switch between the two modes
using the specific USB vendor command.
This patch applies to the following devices:
- Marantz SA-14S1
- Marantz HD-DAC1
Signed-off-by: Jurgen Kramer <gtmkramer at xs4all.nl>
---
sound/usb/pcm.c | 5 +++++
sound/usb/quirks.c | 42 ++++++++++++++++++++++++++++++++++++++++++
sound/usb/quirks.h | 3 +++
3 files changed, 50 insertions(+)
diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c
index c62a165..0d8aba5 100644
--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -482,6 +482,11 @@ static int set_format(struct snd_usb_substream *subs, struct audioformat *fmt)
/* set interface */
if (subs->interface != fmt->iface ||
subs->altset_idx != fmt->altset_idx) {
+
+ err = snd_usb_select_mode_quirk(subs, fmt);
+ if (err < 0)
+ return -EIO;
+
err = usb_set_interface(dev, fmt->iface, fmt->altsetting);
if (err < 0) {
dev_err(&dev->dev,
diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index cc07388..40fb87f 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -1111,6 +1111,48 @@ void snd_usb_set_format_quirk(struct snd_usb_substream *subs,
}
}
+
+/* Marantz/Denon USB DACs need a vendor cmd to switch
+ * between PCM and native DSD mode */
+int snd_usb_select_mode_quirk(struct snd_usb_substream *subs,
+ struct audioformat *fmt)
+{
+ struct usb_device *dev = subs->dev;
+ int err;
+
+ switch (subs->stream->chip->usb_id) {
+ case USB_ID(0x154e, 0x3005): /* Marantz HD-DAC1 */
+ case USB_ID(0x154e, 0x3006): /* Marantz SA-14S1 */
+
+ /* First switch to alt set 0, otherwise the mode switch cmd
+ * will not be accepted by the DAC */
+ err = usb_set_interface(dev, fmt->iface, 0);
+ if (err < 0)
+ return err;
+
+ mdelay(20); /* Delay needed after setting the interface */
+
+ switch(fmt->altsetting) {
+ case 2: /* DSD mode requested */
+ err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 0,
+ USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_INTERFACE,
+ 1, 1, NULL, 0);
+ if (err < 0)
+ return err;
+ break;
+ case 1: /* PCM mode requested */
+ err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 0,
+ USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_INTERFACE,
+ 0, 1, NULL, 0);
+ if (err < 0)
+ return err;
+ break;
+ }
+ mdelay(20);
+ }
+ return 0;
+}
+
void snd_usb_endpoint_start_quirk(struct snd_usb_endpoint *ep)
{
/*
diff --git a/sound/usb/quirks.h b/sound/usb/quirks.h
index 665e972..1b86238 100644
--- a/sound/usb/quirks.h
+++ b/sound/usb/quirks.h
@@ -31,6 +31,9 @@ void snd_usb_ctl_msg_quirk(struct usb_device *dev, unsigned int pipe,
__u8 request, __u8 requesttype, __u16 value,
__u16 index, void *data, __u16 size);
+int snd_usb_select_mode_quirk(struct snd_usb_substream *subs,
+ struct audioformat *fmt);
+
u64 snd_usb_interface_dsd_format_quirks(struct snd_usb_audio *chip,
struct audioformat *fp,
unsigned int sample_bytes);
--
1.9.3
More information about the Alsa-devel
mailing list