[alsa-devel] [PATCH 11/32] ASoC: wm8776: Cleanup manual bias level transitions

[Lars-Peter Clausen]

Set the CODEC driver's suspend_bias_off flag rather than manually going to
SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes
the code a bit shorter and cleaner.

Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.

The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe()
can also be removed as the core will automatically do this after the CODEC
has been probed.

Signed-off-by: Lars-Peter Clausen <lars at metafoo.de>
---
 sound/soc/codecs/wm8776.c | 31 +------------------------------
 1 file changed, 1 insertion(+), 30 deletions(-)

diff --git a/sound/soc/codecs/wm8776.c b/sound/soc/codecs/wm8776.c
index 70952ce..c13050b 100644
--- a/sound/soc/codecs/wm8776.c
+++ b/sound/soc/codecs/wm8776.c
@@ -408,24 +408,6 @@ static struct snd_soc_dai_driver wm8776_dai[] = {
 	},
 };
 
-#ifdef CONFIG_PM
-static int wm8776_suspend(struct snd_soc_codec *codec)
-{
-	wm8776_set_bias_level(codec, SND_SOC_BIAS_OFF);
-
-	return 0;
-}
-
-static int wm8776_resume(struct snd_soc_codec *codec)
-{
-	wm8776_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
-	return 0;
-}
-#else
-#define wm8776_suspend NULL
-#define wm8776_resume NULL
-#endif
-
 static int wm8776_probe(struct snd_soc_codec *codec)
 {
 	int ret = 0;
@@ -436,8 +418,6 @@ static int wm8776_probe(struct snd_soc_codec *codec)
 		return ret;
 	}
 
-	wm8776_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
-
 	/* Latch the update bits; right channel only since we always
 	 * update both. */
 	snd_soc_update_bits(codec, WM8776_HPRVOL, 0x100, 0x100);
@@ -446,19 +426,10 @@ static int wm8776_probe(struct snd_soc_codec *codec)
 	return ret;
 }
 
-/* power down chip */
-static int wm8776_remove(struct snd_soc_codec *codec)
-{
-	wm8776_set_bias_level(codec, SND_SOC_BIAS_OFF);
-	return 0;
-}
-
 static struct snd_soc_codec_driver soc_codec_dev_wm8776 = {
 	.probe = 	wm8776_probe,
-	.remove = 	wm8776_remove,
-	.suspend = 	wm8776_suspend,
-	.resume =	wm8776_resume,
 	.set_bias_level = wm8776_set_bias_level,
+	.suspend_bias_off = true,
 
 	.controls = wm8776_snd_controls,
 	.num_controls = ARRAY_SIZE(wm8776_snd_controls),
-- 
1.8.0