[alsa-devel] [PATCH 4/4 v4] ALSA: usb-audio: Scarlett mixer interface for 6i6, 18i6, 18i8 and 18i20
Chris J Arges
chris.j.arges at canonical.com
Mon Nov 3 23:58:16 CET 2014
This code contains the Scarlett mixer interface code that was originally
written by Tobias Hoffman and Robin Gareus. Because the device doesn't
properly implement UAC2 this code adds a mixer quirk for the device.
Changes from the original code include removing the metering code along with
dead code and comments. Compiler warnings were fixed. The code to initialize
the sampling rate was causing a crash this was fixed as discussed on the
mailing list. Error, and info messages were convered to dev_err and dev_info
interfaces. The custom scarlett_mixer_elem_info struct was replaced with the
more generic usb_mixer_elem_info to be able to recycle more code from mixer.c.
This patch also makes additional modifications based on upstream comments.
Individual control creation functions are removed and a generic
function is no used. Macros for function calls are removed to improve
readability. Hardcoded control initialization is removed.
Signed-off-by: Chris J Arges <chris.j.arges at canonical.com>
---
sound/usb/Makefile | 1 +
sound/usb/mixer_quirks.c | 9 +
sound/usb/mixer_scarlett.c | 1070 ++++++++++++++++++++++++++++++++++++++++++++
sound/usb/mixer_scarlett.h | 6 +
4 files changed, 1086 insertions(+)
create mode 100644 sound/usb/mixer_scarlett.c
create mode 100644 sound/usb/mixer_scarlett.h
diff --git a/sound/usb/Makefile b/sound/usb/Makefile
index 2b92f0d..bcee406 100644
--- a/sound/usb/Makefile
+++ b/sound/usb/Makefile
@@ -9,6 +9,7 @@ snd-usb-audio-objs := card.o \
helper.o \
mixer.o \
mixer_quirks.o \
+ mixer_scarlett.o \
pcm.o \
proc.o \
quirks.o \
diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c
index c9665bf..d06d27a 100644
--- a/sound/usb/mixer_quirks.c
+++ b/sound/usb/mixer_quirks.c
@@ -41,6 +41,7 @@
#include "usbaudio.h"
#include "mixer.h"
#include "mixer_quirks.h"
+#include "mixer_scarlett.h"
#include "helper.h"
extern struct snd_kcontrol_new *snd_usb_feature_unit_ctl;
@@ -1664,6 +1665,14 @@ int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer)
/* detection is disabled in mixer_maps.c */
err = snd_create_std_mono_table(mixer, ebox44_table);
break;
+
+ case USB_ID(0x1235, 0x8012): /* Focusrite Scarlett 6i6 */
+ case USB_ID(0x1235, 0x8002): /* Focusrite Scarlett 8i6 */
+ case USB_ID(0x1235, 0x8004): /* Focusrite Scarlett 18i6 */
+ case USB_ID(0x1235, 0x8014): /* Focusrite Scarlett 18i8 */
+ case USB_ID(0x1235, 0x800c): /* Focusrite Scarlett 18i20 */
+ err = snd_scarlett_controls_create(mixer);
+ break;
}
return err;
diff --git a/sound/usb/mixer_scarlett.c b/sound/usb/mixer_scarlett.c
new file mode 100644
index 0000000..d62f8d4
--- /dev/null
+++ b/sound/usb/mixer_scarlett.c
@@ -0,0 +1,1070 @@
+/*
+ * Scarlett Driver for ALSA
+ *
+ * Copyright (c) 2013 by Tobias Hoffmann
+ * Copyright (c) 2013 by Robin Gareus <robin at gareus.org>
+ * Copyright (c) 2002 by Takashi Iwai <tiwai at suse.de>
+ * Copyright (c) 2014 by Chris J Arges <chris.j.arges at canonical.com>
+ *
+ * Many codes borrowed from audio.c by
+ * Alan Cox (alan at lxorguk.ukuu.org.uk)
+ * Thomas Sailer (sailer at ife.ee.ethz.ch)
+ *
+ * Code cleanup:
+ * David Henningsson <david.henningsson at canonical.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+/*
+ * Rewritten and extended to support more models, e.g. Scarlett 18i8.
+ *
+ * Many features of Scarlett 18i6 do not lend themselves to be implemented
+ * as simple mixer-quirk -- or at least I don't see a way how to do that, yet.
+ * Hence the top parts of this file is a 1:1 copy of select static functions
+ * from mixer.c to implement the interface.
+ * Suggestions how to avoid this code duplication are very welcome.
+ *
+ * eventually this should either be integrated as quirk into mixer_quirks.c
+ * or become a standalone module.
+ *
+ * This source hardcodes the URBs for the Scarlett,
+ * Auto-detection via UAC2 is not feasible to properly discover the vast
+ * majority of features. It's related to both Linux/ALSA's UAC2 as well as
+ * Focusrite's implementation of it. Eventually quirks may be sufficient but
+ * right now it's a major headache to work arount these things.
+ *
+ * NB. Neither the OSX nor the win driver provided by Focusrite performs
+ * discovery, they seem to operate the same as this driver.
+ */
+
+/* Mixer Interface for the Focusrite Scarlett 18i6 audio interface.
+ *
+ * The protocol was reverse engineered by looking at communication between
+ * Scarlett MixControl (v 1.2.128.0) and the Focusrite(R) Scarlett 18i6
+ * (firmware v305) using wireshark and usbmon in January 2013.
+ * Extended in July 2013.
+ *
+ * this mixer gives complete access to all features of the device:
+ * - change Impedance of inputs (Line-in, Mic / Instrument, Hi-Z)
+ * - select clock source
+ * - dynamic input to mixer-matrix assignment
+ * - 18 x 6 mixer-matrix gain stages
+ * - bus routing & volume control
+ * - save setting to hardware
+ * - automatic re-initialization on connect if device was power-cycled
+ * - peak monitoring of all 3 buses (18 input, 6 DAW input, 6 route channels)
+ * (changing the samplerate and buffersize is supported by the PCM interface)
+ *
+ *
+ * USB URB commands overview (bRequest = 0x01 = UAC2_CS_CUR)
+ * wIndex
+ * 0x01 Analog Input line/instrument impedance switch, wValue=0x0901 +
+ * channel, data=Line/Inst (2bytes)
+ * pad (-10dB) switch, wValue=0x0b01 + channel, data=Off/On (2bytes)
+ * ?? wValue=0x0803/04, ?? (2bytes)
+ * 0x0a Master Volume, wValue=0x0200+bus[0:all + only 1..4?] data(2bytes)
+ * Bus Mute/Unmute wValue=0x0100+bus[0:all + only 1..4?], data(2bytes)
+ * 0x28 Clock source, wValue=0x0100, data={1:int,2:spdif,3:adat} (1byte)
+ * 0x29 Set Sample-rate, wValue=0x0100, data=sample-rate(4bytes)
+ * 0x32 Mixer mux, wValue=0x0600 + mixer-channel, data=input-to-connect(2bytes)
+ * 0x33 Output mux, wValue=bus, data=input-to-connect(2bytes)
+ * 0x34 Capture mux, wValue=0...18, data=input-to-connect(2bytes)
+ * 0x3c Matrix Mixer gains, wValue=mixer-node data=gain(2bytes)
+ * ?? [sometimes](4bytes, e.g 0x000003be 0x000003bf ...03ff)
+ *
+ * USB reads: (i.e. actually issued by original software)
+ * 0x01 wValue=0x0901+channel (1byte!!), wValue=0x0b01+channed (1byte!!)
+ * 0x29 wValue=0x0100 sample-rate(4bytes)
+ * wValue=0x0200 ?? 1byte (only once)
+ * 0x2a wValue=0x0100 ?? 4bytes, sample-rate2 ??
+ *
+ * USB reads with bRequest = 0x03 = UAC2_CS_MEM
+ * 0x3c wValue=0x0002 1byte: sync status (locked=1)
+ * wValue=0x0000 18*2byte: peak meter (inputs)
+ * wValue=0x0001 8(?)*2byte: peak meter (mix)
+ * wValue=0x0003 6*2byte: peak meter (pcm/daw)
+ *
+ * USB write with bRequest = 0x03
+ * 0x3c Save settings to hardware: wValue=0x005a, data=0xa5
+ *
+ *
+ * <ditaa>
+ * /--------------\ 18chn 6chn /--------------\
+ * | Hardware in +--+-------\ /------+--+ ALSA PCM out |
+ * \--------------/ | | | | \--------------/
+ * | | | |
+ * | v v |
+ * | +---------------+ |
+ * | \ Matrix Mux / |
+ * | +-----+-----+ |
+ * | | |
+ * | | 18chn |
+ * | v |
+ * | +-----------+ |
+ * | | Mixer | |
+ * | | Matrix | |
+ * | | | |
+ * | | 18x6 Gain | |
+ * | | stages | |
+ * | +-----+-----+ |
+ * | | |
+ * | | |
+ * | 18chn | 6chn | 6chn
+ * v v v
+ * =========================
+ * +---------------+ +--—------------+
+ * \ Output Mux / \ Capture Mux /
+ * +-----+-----+ +-----+-----+
+ * | |
+ * | 6chn |
+ * v |
+ * +-------------+ |
+ * | Master Gain | |
+ * +------+------+ |
+ * | |
+ * | 6chn | 18chn
+ * | (3 stereo pairs) |
+ * /--------------\ | | /--------------\
+ * | Hardware out |<--/ \-->| ALSA PCM in |
+ * \--------------/ \--------------/
+ * </ditaa>
+ *
+ */
+
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/usb/audio-v2.h>
+
+#include <sound/core.h>
+#include <sound/control.h>
+#include <sound/tlv.h>
+
+#include "usbaudio.h"
+#include "mixer.h"
+#include "helper.h"
+#include "power.h"
+
+#include "mixer_scarlett.h"
+
+/* some gui mixers can't handle negative ctl values */
+#define SND_SCARLETT_LEVEL_BIAS 128
+#define SND_SCARLETT_MATRIX_IN_MAX 18
+#define SND_SCARLETT_CONTROLS_MAX 10
+
+enum {
+ SCARLETT_OUTPUTS,
+ SCARLETT_SWITCH_IMPEDANCE,
+ SCARLETT_SWITCH_PAD,
+};
+
+struct scarlett_mixer_elem_enum_info {
+ int start;
+ int len;
+ const char * const *names;
+};
+
+struct scarlett_mixer_control {
+ unsigned char num;
+ unsigned char type;
+ const char *name;
+};
+
+struct scarlett_device_info {
+ int matrix_in;
+ int matrix_out;
+ int input_len;
+ int output_len;
+
+ int pcm_start;
+ int analog_start;
+ int spdif_start;
+ int adat_start;
+ int mix_start;
+
+ struct scarlett_mixer_elem_enum_info opt_master;
+ struct scarlett_mixer_elem_enum_info opt_matrix;
+
+ int matrix_mux_init[SND_SCARLETT_MATRIX_IN_MAX];
+
+ int num_controls; /* number of items in controls */
+ const struct scarlett_mixer_control controls[SND_SCARLETT_CONTROLS_MAX];
+};
+
+/********************** Enum Strings *************************/
+
+#define TXT_OFF "Off"
+#define TXT_PCM(num) "PCM " #num
+#define TXT_ANALOG(num) "Analog " #num
+#define TXT_SPDIF(num) "SPDIF " #num
+#define TXT_ADAT(num) "ADAT " #num
+#define TXT_MIX(letter) "MIX " #letter
+
+static const struct scarlett_mixer_elem_enum_info opt_pad = {
+ .start = 0,
+ .len = 2,
+ .names = (const char * const[]){
+ "0dB", "-10dB"
+ }
+};
+
+static const struct scarlett_mixer_elem_enum_info opt_impedance = {
+ .start = 0,
+ .len = 2,
+ .names = (const char * const[]){
+ "Line", "Hi-Z"
+ }
+};
+
+static const struct scarlett_mixer_elem_enum_info opt_clock = {
+ .start = 1,
+ .len = 3,
+ .names = (const char * const[]){
+ "Internal", "SPDIF", "ADAT"
+ }
+};
+
+static const struct scarlett_mixer_elem_enum_info opt_sync = {
+ .start = 0,
+ .len = 2,
+ .names = (const char * const[]){
+ "No Lock", "Locked"
+ }
+};
+
+static const struct scarlett_mixer_elem_enum_info opt_save = {
+ .start = 0,
+ .len = 2,
+ .names = (const char * const[]){
+ "---", "Save"
+ }
+};
+
+static int scarlett_ctl_switch_info(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_info *uinfo)
+{
+ struct usb_mixer_elem_info *elem = kctl->private_data;
+
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
+ uinfo->count = elem->channels;
+ uinfo->value.integer.min = 0;
+ uinfo->value.integer.max = 1;
+ return 0;
+}
+
+static int scarlett_ctl_switch_get(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct usb_mixer_elem_info *elem = kctl->private_data;
+ int i, err, val;
+
+ for (i = 0; i < elem->channels; i++) {
+ err = snd_usb_get_cur_mix_value(elem, i, i, &val);
+ if (err < 0)
+ return err;
+
+ val = !val; /* invert mute logic for mixer */
+ ucontrol->value.integer.value[i] = val;
+ }
+
+ return 0;
+}
+
+static int scarlett_ctl_switch_put(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct usb_mixer_elem_info *elem = kctl->private_data;
+ int i, changed = 0;
+ int err, oval, val;
+
+ for (i = 0; i < elem->channels; i++) {
+ err = snd_usb_get_cur_mix_value(elem, i, i, &oval);
+ if (err < 0)
+ return err;
+
+ val = ucontrol->value.integer.value[i];
+ val = !val;
+ if (oval != val) {
+ err = snd_usb_set_cur_mix_value(elem, i, i, val);
+ if (err < 0)
+ return err;
+
+ changed = 1;
+ }
+ }
+
+ return changed;
+}
+
+static int scarlett_ctl_info(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_info *uinfo)
+{
+ struct usb_mixer_elem_info *elem = kctl->private_data;
+
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = elem->channels;
+ uinfo->value.integer.min = 0;
+ uinfo->value.integer.max = (int)kctl->private_value +
+ SND_SCARLETT_LEVEL_BIAS;
+ uinfo->value.integer.step = 1;
+ return 0;
+}
+
+static int scarlett_ctl_get(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct usb_mixer_elem_info *elem = kctl->private_data;
+ int i, err, val;
+
+ for (i = 0; i < elem->channels; i++) {
+ err = snd_usb_get_cur_mix_value(elem, i, i, &val);
+ if (err < 0)
+ return err;
+
+ val = clamp(val / 256, -128, (int)kctl->private_value) +
+ SND_SCARLETT_LEVEL_BIAS;
+ ucontrol->value.integer.value[i] = val;
+ }
+
+ return 0;
+}
+
+static int scarlett_ctl_put(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct usb_mixer_elem_info *elem = kctl->private_data;
+ int i, changed = 0;
+ int err, oval, val;
+
+ for (i = 0; i < elem->channels; i++) {
+ err = snd_usb_get_cur_mix_value(elem, i, i, &oval);
+ if (err < 0)
+ return err;
+
+ val = ucontrol->value.integer.value[i] -
+ SND_SCARLETT_LEVEL_BIAS;
+ val = val * 256;
+ if (oval != val) {
+ err = snd_usb_set_cur_mix_value(elem, i, i, val);
+ if (err < 0)
+ return err;
+
+ changed = 1;
+ }
+ }
+
+ return changed;
+}
+
+static int scarlett_ctl_enum_info(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_info *uinfo)
+{
+ struct usb_mixer_elem_info *elem = kctl->private_data;
+ struct scarlett_mixer_elem_enum_info *opt = elem->private_data;
+
+ return snd_ctl_enum_info(uinfo, elem->channels, opt->len, opt->names);
+}
+
+static int scarlett_ctl_enum_get(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct usb_mixer_elem_info *elem = kctl->private_data;
+ struct scarlett_mixer_elem_enum_info *opt = elem->private_data;
+ int err, val;
+
+ err = snd_usb_get_cur_mix_value(elem, 0, 0, &val);
+ if (err < 0)
+ return err;
+
+ if ((opt->start == -1) && (val > opt->len)) /* >= 0x20 */
+ val = 0;
+ else
+ val = clamp(val - opt->start, 0, opt->len-1);
+
+ ucontrol->value.enumerated.item[0] = val;
+
+ return 0;
+}
+
+static int scarlett_ctl_enum_put(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct usb_mixer_elem_info *elem = kctl->private_data;
+ struct scarlett_mixer_elem_enum_info *opt = elem->private_data;
+ int changed = 0;
+ int err, oval, val;
+
+ err = snd_usb_get_cur_mix_value(elem, 0, 0, &oval);
+ if (err < 0)
+ return err;
+
+ val = ucontrol->value.integer.value[0];
+ val = val + opt->start;
+ if (oval != val) {
+ err = snd_usb_set_cur_mix_value(elem, 0, 0, val);
+ if (err < 0)
+ return err;
+
+ changed = 1;
+ }
+
+ return changed;
+}
+
+static int scarlett_ctl_save_get(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ ucontrol->value.enumerated.item[0] = 0;
+ return 0;
+}
+
+static int scarlett_ctl_save_put(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct usb_mixer_elem_info *elem = kctl->private_data;
+ struct snd_usb_audio *chip = elem->mixer->chip;
+ char buf[] = { 0x00, 0xa5 };
+ int err;
+
+ if (ucontrol->value.enumerated.item[0] > 0) {
+ err = snd_usb_ctl_msg(chip->dev,
+ usb_sndctrlpipe(chip->dev, 0), UAC2_CS_MEM,
+ USB_RECIP_INTERFACE | USB_TYPE_CLASS |
+ USB_DIR_OUT, 0x005a, snd_usb_ctrl_intf(chip) |
+ (0x3c << 8), buf, 2);
+ if (err < 0)
+ return err;
+
+ usb_audio_info(elem->mixer->chip,
+ "scarlett: saved settings to hardware.\n");
+ }
+ return 0;
+}
+
+static int scarlett_ctl_meter_get(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct usb_mixer_elem_info *elem = kctl->private_data;
+ struct snd_usb_audio *chip = elem->mixer->chip;
+ unsigned char buf[2 * MAX_CHANNELS] = {0, };
+ int wValue = (elem->control << 8) | elem->idx_off;
+ int idx = snd_usb_ctrl_intf(chip) | (elem->id << 8);
+ int err;
+
+ err = snd_usb_ctl_msg(chip->dev,
+ usb_rcvctrlpipe(chip->dev, 0),
+ UAC2_CS_MEM,
+ USB_RECIP_INTERFACE | USB_TYPE_CLASS |
+ USB_DIR_IN, wValue, idx, buf, elem->channels);
+ if (err < 0)
+ return err;
+
+ ucontrol->value.enumerated.item[0] = clamp((int)buf[0], 0, 1);
+ return 0;
+}
+
+static struct snd_kcontrol_new usb_scarlett_ctl_switch = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "",
+ .info = scarlett_ctl_switch_info,
+ .get = scarlett_ctl_switch_get,
+ .put = scarlett_ctl_switch_put,
+};
+
+static const DECLARE_TLV_DB_SCALE(db_scale_scarlett_gain, -12800, 100, 0);
+
+static struct snd_kcontrol_new usb_scarlett_ctl = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
+ SNDRV_CTL_ELEM_ACCESS_TLV_READ,
+ .name = "",
+ .info = scarlett_ctl_info,
+ .get = scarlett_ctl_get,
+ .put = scarlett_ctl_put,
+ .private_value = 6, /* max value */
+ .tlv = { .p = db_scale_scarlett_gain }
+};
+
+static struct snd_kcontrol_new usb_scarlett_ctl_master = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
+ SNDRV_CTL_ELEM_ACCESS_TLV_READ,
+ .name = "",
+ .info = scarlett_ctl_info,
+ .get = scarlett_ctl_get,
+ .put = scarlett_ctl_put,
+ .private_value = 6, /* max value */
+ .tlv = { .p = db_scale_scarlett_gain }
+};
+
+static struct snd_kcontrol_new usb_scarlett_ctl_enum = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "",
+ .info = scarlett_ctl_enum_info,
+ .get = scarlett_ctl_enum_get,
+ .put = scarlett_ctl_enum_put,
+};
+
+static struct snd_kcontrol_new usb_scarlett_ctl_sync = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+ .name = "",
+ .info = scarlett_ctl_enum_info,
+ .get = scarlett_ctl_meter_get,
+};
+
+static struct snd_kcontrol_new usb_scarlett_ctl_save = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "",
+ .info = scarlett_ctl_enum_info,
+ .get = scarlett_ctl_save_get,
+ .put = scarlett_ctl_save_put,
+};
+
+static int add_new_ctl(struct usb_mixer_interface *mixer,
+ const struct snd_kcontrol_new *ncontrol,
+ int index, int offset, int num,
+ int val_type, int channels, const char *name,
+ const struct scarlett_mixer_elem_enum_info *opt,
+ struct usb_mixer_elem_info **elem_ret
+)
+{
+ struct snd_kcontrol *kctl;
+ struct usb_mixer_elem_info *elem;
+ int err;
+
+ elem = kzalloc(sizeof(*elem), GFP_KERNEL);
+ if (!elem)
+ return -ENOMEM;
+
+ elem->mixer = mixer;
+ elem->control = offset;
+ elem->idx_off = num;
+ elem->id = index;
+ elem->val_type = val_type;
+
+ elem->channels = channels;
+
+ /* add scarlett_mixer_elem_enum_info struct */
+ elem->private_data = (void *)opt;
+
+ kctl = snd_ctl_new1(ncontrol, elem);
+ if (!kctl) {
+ usb_audio_err(mixer->chip, "cannot malloc kcontrol\n");
+ kfree(elem);
+ return -ENOMEM;
+ }
+ kctl->private_free = snd_usb_mixer_elem_free;
+
+ snprintf(kctl->id.name, sizeof(kctl->id.name), "%s", name);
+
+ err = snd_ctl_add(mixer->chip->card, kctl);
+ if (err < 0)
+ return err;
+
+ if (elem_ret)
+ *elem_ret = elem;
+
+ return 0;
+}
+
+static int add_output_ctls(struct usb_mixer_interface *mixer,
+ int index, const char *name,
+ const struct scarlett_device_info *info)
+{
+ int err;
+ char mx[48];
+ struct usb_mixer_elem_info *elem;
+
+ /* Add mute switch */
+ snprintf(mx, sizeof(mx), "Master %d (%s) Playback Switch",
+ index + 1, name);
+ err = add_new_ctl(mixer, &usb_scarlett_ctl_switch, 0x0a, 0x01,
+ 2*index+1, USB_MIXER_S16, 2, mx, NULL, &elem);
+ if (err < 0)
+ return err;
+
+ /* Add volume control and initialize to 0 */
+ snprintf(mx, sizeof(mx), "Master %d (%s) Playback Volume",
+ index + 1, name);
+ err = add_new_ctl(mixer, &usb_scarlett_ctl_master, 0x0a, 0x02,
+ 2*index+1, USB_MIXER_S16, 2, mx, NULL, &elem);
+ if (err < 0)
+ return err;
+
+ /* Add L channel source playback enumeration */
+ snprintf(mx, sizeof(mx), "Master %dL (%s) Source Playback Enum",
+ index + 1, name);
+ err = add_new_ctl(mixer, &usb_scarlett_ctl_enum, 0x33, 0x00, 2*index,
+ USB_MIXER_S16, 1, mx, &info->opt_master, &elem);
+ if (err < 0)
+ return err;
+
+ /* Add R channel source playback enumeration */
+ snprintf(mx, sizeof(mx), "Master %dR (%s) Source Playback Enum",
+ index + 1, name);
+ err = add_new_ctl(mixer, &usb_scarlett_ctl_enum, 0x33, 0x00, 2*index+1,
+ USB_MIXER_S16, 1, mx, &info->opt_master, &elem);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+/********************** device-specific config *************************/
+
+static const char * const s6i6_names[] = {
+ TXT_OFF,
+ TXT_PCM(1), TXT_PCM(2), TXT_PCM(3), TXT_PCM(4),
+ TXT_PCM(5), TXT_PCM(6), TXT_PCM(7), TXT_PCM(8),
+ TXT_PCM(9), TXT_PCM(10), TXT_PCM(11), TXT_PCM(12),
+ TXT_ANALOG(1), TXT_ANALOG(2), TXT_ANALOG(3), TXT_ANALOG(4),
+ TXT_SPDIF(1), TXT_SPDIF(2),
+ TXT_MIX(A), TXT_MIX(B), TXT_MIX(C), TXT_MIX(D),
+ TXT_MIX(E), TXT_MIX(F), TXT_MIX(G), TXT_MIX(H),
+};
+
+/* untested... */
+static const struct scarlett_device_info s6i6_info = {
+ .matrix_in = 18,
+ .matrix_out = 8,
+ .input_len = 6,
+ .output_len = 6,
+
+ .pcm_start = 0,
+ .analog_start = 12,
+ .spdif_start = 16,
+ .adat_start = 18,
+ .mix_start = 18,
+
+ .opt_master = {
+ .start = -1,
+ .len = 27,
+ .names = s6i6_names
+ },
+
+ .opt_matrix = {
+ .start = -1,
+ .len = 19,
+ .names = s6i6_names
+ },
+
+ .num_controls = 0,
+ .controls = {
+ { .num = 0, .type = SCARLETT_OUTPUTS, .name = "Monitor" },
+ { .num = 1, .type = SCARLETT_OUTPUTS, .name = "Headphone" },
+ { .num = 2, .type = SCARLETT_OUTPUTS, .name = "SPDIF" },
+ { .num = 1, .type = SCARLETT_SWITCH_IMPEDANCE, .name = NULL},
+ { .num = 1, .type = SCARLETT_SWITCH_PAD, .name = NULL},
+ { .num = 2, .type = SCARLETT_SWITCH_IMPEDANCE, .name = NULL},
+ { .num = 2, .type = SCARLETT_SWITCH_PAD, .name = NULL},
+ { .num = 3, .type = SCARLETT_SWITCH_PAD, .name = NULL},
+ { .num = 4, .type = SCARLETT_SWITCH_PAD, .name = NULL},
+ },
+
+ .matrix_mux_init = {
+ 12, 13, 14, 15, /* Analog -> 1..4 */
+ 16, 17, /* SPDIF -> 5,6 */
+ 0, 1, 2, 3, 4, 5, 6, 7, /* PCM[1..12] -> 7..18 */
+ 8, 9, 10, 11
+ }
+};
+
+/* and 2 loop channels: Mix1, Mix2 */
+static const char * const s8i6_names[] = {
+ TXT_OFF,
+ TXT_PCM(1), TXT_PCM(2), TXT_PCM(3), TXT_PCM(4),
+ TXT_PCM(5), TXT_PCM(6), TXT_PCM(7), TXT_PCM(8),
+ TXT_PCM(9), TXT_PCM(10), TXT_PCM(11), TXT_PCM(12),
+ TXT_ANALOG(1), TXT_ANALOG(2), TXT_ANALOG(3), TXT_ANALOG(4),
+ TXT_SPDIF(1), TXT_SPDIF(2),
+ TXT_MIX(A), TXT_MIX(B), TXT_MIX(C), TXT_MIX(D),
+ TXT_MIX(E), TXT_MIX(F),
+};
+
+/* untested... */
+static const struct scarlett_device_info s8i6_info = {
+ .matrix_in = 18,
+ .matrix_out = 6,
+ .input_len = 8,
+ .output_len = 6,
+
+ .pcm_start = 0,
+ .analog_start = 12,
+ .spdif_start = 16,
+ .adat_start = 18,
+ .mix_start = 18,
+
+ .opt_master = {
+ .start = -1,
+ .len = 25,
+ .names = s8i6_names
+ },
+
+ .opt_matrix = {
+ .start = -1,
+ .len = 19,
+ .names = s8i6_names
+ },
+
+ .num_controls = 7,
+ .controls = {
+ { .num = 0, .type = SCARLETT_OUTPUTS, .name = "Monitor" },
+ { .num = 1, .type = SCARLETT_OUTPUTS, .name = "Headphone" },
+ { .num = 2, .type = SCARLETT_OUTPUTS, .name = "SPDIF" },
+ { .num = 1, .type = SCARLETT_SWITCH_IMPEDANCE, .name = NULL},
+ { .num = 2, .type = SCARLETT_SWITCH_IMPEDANCE, .name = NULL},
+ { .num = 3, .type = SCARLETT_SWITCH_PAD, .name = NULL},
+ { .num = 4, .type = SCARLETT_SWITCH_PAD, .name = NULL},
+ },
+
+ .matrix_mux_init = {
+ 12, 13, 14, 15, /* Analog -> 1..4 */
+ 16, 17, /* SPDIF -> 5,6 */
+ 0, 1, 2, 3, 4, 5, 6, 7, /* PCM[1..12] -> 7..18 */
+ 8, 9, 10, 11
+ }
+};
+
+static const char * const s18i6_names[] = {
+ TXT_OFF,
+ TXT_PCM(1), TXT_PCM(2), TXT_PCM(3), TXT_PCM(4),
+ TXT_PCM(5), TXT_PCM(6),
+ TXT_ANALOG(1), TXT_ANALOG(2), TXT_ANALOG(3), TXT_ANALOG(4),
+ TXT_ANALOG(5), TXT_ANALOG(6), TXT_ANALOG(7), TXT_ANALOG(8),
+ TXT_SPDIF(1), TXT_SPDIF(2),
+ TXT_ADAT(1), TXT_ADAT(2), TXT_ADAT(3), TXT_ADAT(4),
+ TXT_ADAT(5), TXT_ADAT(6), TXT_ADAT(7), TXT_ADAT(8),
+ TXT_MIX(A), TXT_MIX(B), TXT_MIX(C), TXT_MIX(D),
+ TXT_MIX(E), TXT_MIX(F),
+};
+
+static const struct scarlett_device_info s18i6_info = {
+ .matrix_in = 18,
+ .matrix_out = 6,
+ .input_len = 18,
+ .output_len = 6,
+
+ .pcm_start = 0,
+ .analog_start = 6,
+ .spdif_start = 14,
+ .adat_start = 16,
+ .mix_start = 24,
+
+ .opt_master = {
+ .start = -1,
+ .len = 31,
+ .names = s18i6_names
+ },
+
+ .opt_matrix = {
+ .start = -1,
+ .len = 25,
+ .names = s18i6_names
+ },
+
+ .num_controls = 5,
+ .controls = {
+ { .num = 0, .type = SCARLETT_OUTPUTS, .name = "Monitor" },
+ { .num = 1, .type = SCARLETT_OUTPUTS, .name = "Headphone" },
+ { .num = 2, .type = SCARLETT_OUTPUTS, .name = "SPDIF" },
+ { .num = 1, .type = SCARLETT_SWITCH_IMPEDANCE, .name = NULL},
+ { .num = 2, .type = SCARLETT_SWITCH_IMPEDANCE, .name = NULL},
+ },
+
+ .matrix_mux_init = {
+ 6, 7, 8, 9, 10, 11, 12, 13, /* Analog -> 1..8 */
+ 16, 17, 18, 19, 20, 21, /* ADAT[1..6] -> 9..14 */
+ 14, 15, /* SPDIF -> 15,16 */
+ 0, 1 /* PCM[1,2] -> 17,18 */
+ }
+};
+
+static const char * const s18i8_names[] = {
+ TXT_OFF,
+ TXT_PCM(1), TXT_PCM(2), TXT_PCM(3), TXT_PCM(4),
+ TXT_PCM(5), TXT_PCM(6), TXT_PCM(7), TXT_PCM(8),
+ TXT_ANALOG(1), TXT_ANALOG(2), TXT_ANALOG(3), TXT_ANALOG(4),
+ TXT_ANALOG(5), TXT_ANALOG(6), TXT_ANALOG(7), TXT_ANALOG(8),
+ TXT_SPDIF(1), TXT_SPDIF(2),
+ TXT_ADAT(1), TXT_ADAT(2), TXT_ADAT(3), TXT_ADAT(4),
+ TXT_ADAT(5), TXT_ADAT(6), TXT_ADAT(7), TXT_ADAT(8),
+ TXT_MIX(A), TXT_MIX(B), TXT_MIX(C), TXT_MIX(D),
+ TXT_MIX(E), TXT_MIX(F), TXT_MIX(G), TXT_MIX(H),
+};
+
+static const struct scarlett_device_info s18i8_info = {
+ .matrix_in = 18,
+ .matrix_out = 8,
+ .input_len = 18,
+ .output_len = 8,
+
+ .pcm_start = 0,
+ .analog_start = 8,
+ .spdif_start = 16,
+ .adat_start = 18,
+ .mix_start = 26,
+
+ .opt_master = {
+ .start = -1,
+ .len = 35,
+ .names = s18i8_names
+ },
+
+ .opt_matrix = {
+ .start = -1,
+ .len = 27,
+ .names = s18i8_names
+ },
+
+ .num_controls = 10,
+ .controls = {
+ { .num = 0, .type = SCARLETT_OUTPUTS, .name = "Monitor" },
+ { .num = 1, .type = SCARLETT_OUTPUTS, .name = "Headphone 1" },
+ { .num = 2, .type = SCARLETT_OUTPUTS, .name = "Headphone 2" },
+ { .num = 3, .type = SCARLETT_OUTPUTS, .name = "SPDIF" },
+ { .num = 1, .type = SCARLETT_SWITCH_IMPEDANCE, .name = NULL},
+ { .num = 1, .type = SCARLETT_SWITCH_PAD, .name = NULL},
+ { .num = 2, .type = SCARLETT_SWITCH_IMPEDANCE, .name = NULL},
+ { .num = 2, .type = SCARLETT_SWITCH_PAD, .name = NULL},
+ { .num = 3, .type = SCARLETT_SWITCH_PAD, .name = NULL},
+ { .num = 4, .type = SCARLETT_SWITCH_PAD, .name = NULL},
+ },
+
+ .matrix_mux_init = {
+ 8, 9, 10, 11, 12, 13, 14, 15, /* Analog -> 1..8 */
+ 18, 19, 20, 21, 22, 23, /* ADAT[1..6] -> 9..14 */
+ 16, 17, /* SPDIF -> 15,16 */
+ 0, 1 /* PCM[1,2] -> 17,18 */
+ }
+};
+
+static const char * const s18i20_names[] = {
+ TXT_OFF,
+ TXT_PCM(1), TXT_PCM(2), TXT_PCM(3), TXT_PCM(4),
+ TXT_PCM(5), TXT_PCM(6), TXT_PCM(7), TXT_PCM(8),
+ TXT_PCM(9), TXT_PCM(10), TXT_PCM(11), TXT_PCM(12),
+ TXT_PCM(13), TXT_PCM(14), TXT_PCM(15), TXT_PCM(16),
+ TXT_PCM(17), TXT_PCM(18), TXT_PCM(19), TXT_PCM(20),
+ TXT_ANALOG(1), TXT_ANALOG(2), TXT_ANALOG(3), TXT_ANALOG(4),
+ TXT_ANALOG(5), TXT_ANALOG(6), TXT_ANALOG(7), TXT_ANALOG(8),
+ TXT_SPDIF(1), TXT_SPDIF(2),
+ TXT_ADAT(1), TXT_ADAT(2), TXT_ADAT(3), TXT_ADAT(4),
+ TXT_ADAT(5), TXT_ADAT(6), TXT_ADAT(7), TXT_ADAT(8),
+ TXT_MIX('A'), TXT_MIX('B'), TXT_MIX('C'), TXT_MIX('D'),
+ TXT_MIX('E'), TXT_MIX('F'), TXT_MIX('G'), TXT_MIX('H'),
+};
+
+static const struct scarlett_device_info s18i20_info = {
+ .matrix_in = 18,
+ .matrix_out = 8,
+ .input_len = 18,
+ .output_len = 20,
+
+ .pcm_start = 0,
+ .analog_start = 20,
+ .spdif_start = 28,
+ .adat_start = 30,
+ .mix_start = 38,
+
+ .opt_master = {
+ .start = -1,
+ .len = 47,
+ .names = s18i20_names
+ },
+
+ .opt_matrix = {
+ .start = -1,
+ .len = 39,
+ .names = s18i20_names
+ },
+
+ .num_controls = 10,
+ .controls = {
+ { .num = 0, .type = SCARLETT_OUTPUTS, .name = "Monitor" },
+ { .num = 1, .type = SCARLETT_OUTPUTS, .name = "Line 3/4" },
+ { .num = 2, .type = SCARLETT_OUTPUTS, .name = "Line 5/6" },
+ { .num = 3, .type = SCARLETT_OUTPUTS, .name = "Line 7/8" },
+ { .num = 4, .type = SCARLETT_OUTPUTS, .name = "Line 9/10" },
+ { .num = 5, .type = SCARLETT_OUTPUTS, .name = "SPDIF" },
+ { .num = 6, .type = SCARLETT_OUTPUTS, .name = "ADAT 1/2" },
+ { .num = 7, .type = SCARLETT_OUTPUTS, .name = "ADAT 3/4" },
+ { .num = 8, .type = SCARLETT_OUTPUTS, .name = "ADAT 5/6" },
+ { .num = 9, .type = SCARLETT_OUTPUTS, .name = "ADAT 7/8" },
+ /*{ .num = 1, .type = SCARLETT_SWITCH_IMPEDANCE, .name = NULL},
+ { .num = 1, .type = SCARLETT_SWITCH_PAD, .name = NULL},
+ { .num = 2, .type = SCARLETT_SWITCH_IMPEDANCE, .name = NULL},
+ { .num = 2, .type = SCARLETT_SWITCH_PAD, .name = NULL},
+ { .num = 3, .type = SCARLETT_SWITCH_PAD, .name = NULL},
+ { .num = 4, .type = SCARLETT_SWITCH_PAD, .name = NULL},*/
+ },
+
+ .matrix_mux_init = {
+ 20, 21, 22, 23, 24, 25, 26, 27, /* Analog -> 1..8 */
+ 30, 31, 32, 33, 34, 35, /* ADAT[1..6] -> 9..14 */
+ 28, 29, /* SPDIF -> 15,16 */
+ 0, 1 /* PCM[1,2] -> 17,18 */
+ }
+};
+
+
+static int scarlett_controls_create_generic(struct usb_mixer_interface *mixer,
+ const struct scarlett_device_info *info)
+{
+ int i = 0;
+ int err = 0;
+ char mx[32];
+ const struct scarlett_mixer_control *ctl;
+ struct usb_mixer_elem_info *elem;
+
+ /* create master switch and playback volume */
+ err = add_new_ctl(mixer, &usb_scarlett_ctl_switch, 0x0a, 0x01, 0,
+ USB_MIXER_S16, 1, "Master Playback Switch", NULL,
+ &elem);
+ if (err < 0)
+ return err;
+
+ err = add_new_ctl(mixer, &usb_scarlett_ctl_master, 0x0a, 0x02, 0,
+ USB_MIXER_S16, 1, "Master Playback Volume", NULL,
+ &elem);
+ if (err < 0)
+ return err;
+
+ /* iterate through controls in info struct and create each one */
+ for (i = 0; i < info->num_controls; i++) {
+ ctl = &info->controls[i];
+
+ switch (ctl->type) {
+ case SCARLETT_OUTPUTS:
+ err = add_output_ctls(mixer, ctl->num, ctl->name, info);
+ if (err < 0)
+ return err;
+ break;
+ case SCARLETT_SWITCH_IMPEDANCE:
+ sprintf(mx, "Input %d Impedance Switch",
+ ctl->num);
+ err = add_new_ctl(mixer, &usb_scarlett_ctl_enum, 0x01,
+ 0x09, ctl->num, USB_MIXER_S16, 1, mx,
+ &opt_impedance, &elem);
+ if (err < 0)
+ return err;
+ break;
+ case SCARLETT_SWITCH_PAD:
+ sprintf(mx, "Input %d Pad Switch", ctl->num);
+ err = add_new_ctl(mixer, &usb_scarlett_ctl_enum, 0x01,
+ 0x0b, ctl->num, USB_MIXER_S16, 1, mx,
+ &opt_pad, &elem);
+ if (err < 0)
+ return err;
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * Create and initialize a mixer for the Focusrite(R) Scarlett
+ */
+int snd_scarlett_controls_create(struct usb_mixer_interface *mixer)
+{
+ int err, i, o;
+ char mx[32];
+ const struct scarlett_device_info *info;
+ struct usb_mixer_elem_info *elem;
+ static char sample_rate_buffer[4] = { '\x80', '\xbb', '\x00', '\x00' };
+
+ switch (mixer->chip->usb_id) {
+ case USB_ID(0x1235, 0x8012):
+ info = &s6i6_info;
+ break;
+ case USB_ID(0x1235, 0x8002):
+ info = &s8i6_info;
+ break;
+ case USB_ID(0x1235, 0x8004):
+ info = &s18i6_info;
+ break;
+ case USB_ID(0x1235, 0x8014):
+ info = &s18i8_info;
+ break;
+ case USB_ID(0x1235, 0x800c):
+ info = &s18i20_info;
+ break;
+ default: /* device not (yet) supported */
+ return -EINVAL;
+ }
+
+ /* generic function to create controls */
+ err = scarlett_controls_create_generic(mixer, info);
+ if (err < 0)
+ return err;
+
+ for (i = 0; i < info->matrix_in; i++) {
+ snprintf(mx, 32, "Matrix %02d Input Playback Route", i+1);
+ err = add_new_ctl(mixer, &usb_scarlett_ctl_enum, 0x32, 0x06, i,
+ USB_MIXER_S16, 1, mx, &info->opt_matrix,
+ &elem);
+ if (err < 0)
+ return err;
+
+ for (o = 0; o < info->matrix_out; o++) {
+ sprintf(mx, "Matrix %02d Mix %c Playback Volume", i+1,
+ o+'A');
+ err = add_new_ctl(mixer, &usb_scarlett_ctl, 0x3c, 0x00,
+ (i << 3) + (o & 0x07), USB_MIXER_S16,
+ 1, mx, NULL, &elem);
+ if (err < 0)
+ return err;
+
+ }
+ }
+
+ for (i = 0; i < info->input_len; i++) {
+ snprintf(mx, 32, "Input Source %02d Capture Route", i+1);
+ err = add_new_ctl(mixer, &usb_scarlett_ctl_enum, 0x34, 0x00, i,
+ USB_MIXER_S16, 1, mx, &info->opt_master,
+ &elem);
+ if (err < 0)
+ return err;
+ }
+
+ /* val_len == 1 needed here */
+ err = add_new_ctl(mixer, &usb_scarlett_ctl_enum, 0x28, 0x01, 0,
+ USB_MIXER_U8, 1, "Sample Clock Source",
+ &opt_clock, &elem);
+ if (err < 0)
+ return err;
+
+ /* val_len == 1 and UAC2_CS_MEM */
+ err = add_new_ctl(mixer, &usb_scarlett_ctl_sync, 0x3c, 0x00, 2,
+ USB_MIXER_U8, 1, "Sample Clock Sync Status",
+ &opt_sync, &elem);
+ if (err < 0)
+ return err;
+
+ /* val_len == 1 and UAC2_CS_MEM */
+ err = add_new_ctl(mixer, &usb_scarlett_ctl_save, 0x3c, 0x00, 0x5a,
+ USB_MIXER_U8, 1, "Save To HW", &opt_save, &elem);
+ if (err < 0)
+ return err;
+
+ /* initialize sampling rate to 48000 */
+ err = snd_usb_ctl_msg(mixer->chip->dev,
+ usb_sndctrlpipe(mixer->chip->dev, 0), UAC2_CS_CUR,
+ USB_RECIP_INTERFACE | USB_TYPE_CLASS |
+ USB_DIR_OUT, 0x0100, snd_usb_ctrl_intf(mixer->chip) |
+ (0x29 << 8), sample_rate_buffer, 4);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
diff --git a/sound/usb/mixer_scarlett.h b/sound/usb/mixer_scarlett.h
new file mode 100644
index 0000000..19c592a
--- /dev/null
+++ b/sound/usb/mixer_scarlett.h
@@ -0,0 +1,6 @@
+#ifndef __USB_MIXER_SCARLETT_H
+#define __USB_MIXER_SCARLETT_H
+
+int snd_scarlett_controls_create(struct usb_mixer_interface *mixer);
+
+#endif /* __USB_MIXER_SCARLETT_H */
--
2.1.1
More information about the Alsa-devel
mailing list