[alsa-devel] [PATCH V2 1/2] ASoC: max98090: Add master clock handling

Tushar Behera tushar.behera at linaro.org
Mon May 26 10:28:21 CEST 2014


If master clock is provided through device tree, then update
the master clock frequency during set_sysclk.

Documentation has been updated to reflect the change.

Signed-off-by: Tushar Behera <tushar.behera at linaro.org>
---
 .../devicetree/bindings/sound/max98090.txt         |    6 +++++
 sound/soc/codecs/max98090.c                        |   23 ++++++++++++++++++++
 sound/soc/codecs/max98090.h                        |    1 +
 3 files changed, 30 insertions(+)

diff --git a/Documentation/devicetree/bindings/sound/max98090.txt b/Documentation/devicetree/bindings/sound/max98090.txt
index e4c8b36..a5e63fa 100644
--- a/Documentation/devicetree/bindings/sound/max98090.txt
+++ b/Documentation/devicetree/bindings/sound/max98090.txt
@@ -10,6 +10,12 @@ Required properties:
 
 - interrupts : The CODEC's interrupt output.
 
+Optional properties:
+
+- clocks: The phandle of the master clock to the CODEC
+
+- clock-names: Should be "mclk"
+
 Pins on the device (for linking into audio routes):
 
   * MIC1
diff --git a/sound/soc/codecs/max98090.c b/sound/soc/codecs/max98090.c
index 9b76f5a..9275785 100644
--- a/sound/soc/codecs/max98090.c
+++ b/sound/soc/codecs/max98090.c
@@ -17,6 +17,7 @@
 #include <linux/regmap.h>
 #include <linux/slab.h>
 #include <linux/acpi.h>
+#include <linux/clk.h>
 #include <sound/jack.h>
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
@@ -1800,6 +1801,19 @@ static int max98090_set_bias_level(struct snd_soc_codec *codec,
 		break;
 
 	case SND_SOC_BIAS_PREPARE:
+		/*
+		 * SND_SOC_BIAS_PREPARE is called while preparing for a
+		 * transition to ON or away from ON. If current bias_level
+		 * is SND_SOC_BIAS_ON, then it is preparing for a transition
+		 * away from ON. Disable the clock in that case, otherwise
+		 * enable it.
+		 */
+		if (!IS_ERR(max98090->mclk)) {
+			if (codec->dapm.bias_level == SND_SOC_BIAS_ON)
+				clk_disable_unprepare(max98090->mclk);
+			else
+				clk_prepare_enable(max98090->mclk);
+		}
 		break;
 
 	case SND_SOC_BIAS_STANDBY:
@@ -1929,6 +1943,11 @@ static int max98090_dai_set_sysclk(struct snd_soc_dai *dai,
 	if (freq == max98090->sysclk)
 		return 0;
 
+	if (!IS_ERR(max98090->mclk)) {
+		freq = clk_round_rate(max98090->mclk, freq);
+		clk_set_rate(max98090->mclk, freq);
+	}
+
 	/* Setup clocks for slave mode, and using the PLL
 	 * PSCLK = 0x01 (when master clk is 10MHz to 20MHz)
 	 *		 0x02 (when master clk is 20MHz to 40MHz)..
@@ -2213,6 +2232,10 @@ static int max98090_probe(struct snd_soc_codec *codec)
 
 	dev_dbg(codec->dev, "max98090_probe\n");
 
+	max98090->mclk = devm_clk_get(codec->dev, "mclk");
+	if (PTR_ERR(max98090->mclk) == -EPROBE_DEFER)
+		return -EPROBE_DEFER;
+
 	max98090->codec = codec;
 
 	/* Reset the codec, the DSP core, and disable all interrupts */
diff --git a/sound/soc/codecs/max98090.h b/sound/soc/codecs/max98090.h
index 5a3c8d0..cf1b606 100644
--- a/sound/soc/codecs/max98090.h
+++ b/sound/soc/codecs/max98090.h
@@ -1524,6 +1524,7 @@ struct max98090_priv {
 	struct snd_soc_codec *codec;
 	enum max98090_type devtype;
 	struct max98090_pdata *pdata;
+	struct clk *mclk;
 	unsigned int sysclk;
 	unsigned int bclk;
 	unsigned int lrclk;
-- 
1.7.9.5



More information about the Alsa-devel mailing list