[alsa-devel] [PATCH v2] ASoC: davinci-mcasp: set up channel status bits for S/PDIF mode

[Peter Ujfalusi]

Hi Daniel,

On 03/27/2014 11:49 AM, Daniel Mack wrote:
> In DIT (S/PDIF) mode, program the transmitted user bits to reflect the
> configured sample rate, along with some other details.
> 
> Signed-off-by: Daniel Mack <zonque at gmail.com>
> ---
> Thanks to Peter for the review and bearing with my confusion :)
> 
>  sound/soc/davinci/davinci-mcasp.c | 49 +++++++++++++++++++++++++++++++++++++--
>  1 file changed, 47 insertions(+), 2 deletions(-)
> 
> diff --git a/sound/soc/davinci/davinci-mcasp.c b/sound/soc/davinci/davinci-mcasp.c
> index 375e197..1fbded0 100644
> --- a/sound/soc/davinci/davinci-mcasp.c
> +++ b/sound/soc/davinci/davinci-mcasp.c
> @@ -27,6 +27,7 @@
>  #include <linux/of_platform.h>
>  #include <linux/of_device.h>
>  
> +#include <sound/asoundef.h>
>  #include <sound/core.h>
>  #include <sound/pcm.h>
>  #include <sound/pcm_params.h>
> @@ -576,8 +577,12 @@ static int mcasp_i2s_hw_param(struct davinci_mcasp *mcasp, int stream)
>  }
>  
>  /* S/PDIF */
> -static int mcasp_dit_hw_param(struct davinci_mcasp *mcasp)
> +static int mcasp_dit_hw_param(struct davinci_mcasp *mcasp,
> +			      unsigned int rate)
>  {
> +	u32 val = 0;
> +	u8 *bytes = (u8*) &val;

Would it be better to call these variables as:
u32 cs; /* as in Channel Status */
u8 *cs_bytes = (u8*) &cs; /* Channel Status in bytes */

Without the comments of course.
Sorry, I did not noticed this previously...

Otherwise it looks good, does it work? ;)

Regards,
Péter

> +
>  	/* Set the TX format : 24 bit right rotation, 32 bit slot, Pad 0
>  	   and LSB first */
>  	mcasp_set_bits(mcasp, DAVINCI_MCASP_TXFMT_REG, TXROT(6) | TXSSZ(15));
> @@ -599,6 +604,46 @@ static int mcasp_dit_hw_param(struct davinci_mcasp *mcasp)
>  	/* Enable the DIT */
>  	mcasp_set_bits(mcasp, DAVINCI_MCASP_TXDITCTL_REG, DITEN);
>  
> +	/* Set S/PDIF channel status bits */
> +	bytes[0] = IEC958_AES0_CON_NOT_COPYRIGHT;
> +	bytes[1] = IEC958_AES1_CON_PCM_CODER;
> +
> +	switch (rate) {
> +	case 22050:
> +		bytes[3] |= IEC958_AES3_CON_FS_22050;
> +		break;
> +	case 24000:
> +		bytes[3] |= IEC958_AES3_CON_FS_24000;
> +		break;
> +	case 32000:
> +		bytes[3] |= IEC958_AES3_CON_FS_32000;
> +		break;
> +	case 44100:
> +		bytes[3] |= IEC958_AES3_CON_FS_44100;
> +		break;
> +	case 48000:
> +		bytes[3] |= IEC958_AES3_CON_FS_48000;
> +		break;
> +	case 88200:
> +		bytes[3] |= IEC958_AES3_CON_FS_88200;
> +		break;
> +	case 96000:
> +		bytes[3] |= IEC958_AES3_CON_FS_96000;
> +		break;
> +	case 176400:
> +		bytes[3] |= IEC958_AES3_CON_FS_176400;
> +		break;
> +	case 192000:
> +		bytes[3] |= IEC958_AES3_CON_FS_192000;
> +		break;
> +	default:
> +		printk(KERN_WARNING "unsupported sampling rate: %d\n", rate);
> +		return -EINVAL;
> +	}
> +
> +	mcasp_set_reg(mcasp, DAVINCI_MCASP_DITCSRA_REG, val);
> +	mcasp_set_reg(mcasp, DAVINCI_MCASP_DITCSRB_REG, val);
> +
>  	return 0;
>  }
>  
> @@ -634,7 +679,7 @@ static int davinci_mcasp_hw_params(struct snd_pcm_substream *substream,
>  		return ret;
>  
>  	if (mcasp->op_mode == DAVINCI_MCASP_DIT_MODE)
> -		ret = mcasp_dit_hw_param(mcasp);
> +		ret = mcasp_dit_hw_param(mcasp, params_rate(params));
>  	else
>  		ret = mcasp_i2s_hw_param(mcasp, substream->stream);
>  
>