[alsa-devel] [PATCHv2 08/11] ASoc: wm8350: Remove the set_cache_io() entirely from ASoC probe.

[Xiubo Li]

As we can set the CODEC I/O while snd_soc_register_codec(), so the
calling of set_cache_io() from CODEC ASoC probe could be removed
entirely.

And then we can set the CODEC I/O in the device probe instead of
CODEC ASoC probe as earily as possible.

Signed-off-by: Xiubo Li <Li.Xiubo at freescale.com>
---
 sound/soc/codecs/wm8350.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/wm8350.c b/sound/soc/codecs/wm8350.c
index 757256b..6b31a9f 100644
--- a/sound/soc/codecs/wm8350.c
+++ b/sound/soc/codecs/wm8350.c
@@ -1505,8 +1505,6 @@ static  int wm8350_codec_probe(struct snd_soc_codec *codec)
 	if (ret != 0)
 		return ret;
 
-	snd_soc_codec_set_cache_io(codec, wm8350->regmap);
-
 	/* Put the codec into reset if it wasn't already */
 	wm8350_clear_bits(wm8350, WM8350_POWER_MGMT_5, WM8350_CODEC_ENA);
 
@@ -1608,11 +1606,19 @@ static int  wm8350_codec_remove(struct snd_soc_codec *codec)
 	return 0;
 }
 
+struct regmap *wm8350_get_regmap(struct device *dev)
+{
+	struct wm8350 *wm8350 = dev_get_platdata(dev);
+
+	return wm8350->regmap;
+}
+
 static struct snd_soc_codec_driver soc_codec_dev_wm8350 = {
 	.probe =	wm8350_codec_probe,
 	.remove =	wm8350_codec_remove,
 	.suspend = 	wm8350_suspend,
 	.resume =	wm8350_resume,
+	.get_regmap =	wm8350_get_regmap,
 	.set_bias_level = wm8350_set_bias_level,
 
 	.controls = wm8350_snd_controls,
-- 
1.8.4