[alsa-devel] Fwd: Re: no reset_resume for driver snd-usb-audio for logitech headset H600
baumber at hotmail.com
baumber at hotmail.com
Tue Mar 25 20:21:34 CET 2014
On 2014-01-22 18:16 CET (UTC+1), Takashi Iwai wrote:
> At Wed, 22 Jan 2014 18:12:45 +0100,
> <baumber at hotmail.com> wrote:
>>
>> On 2014-01-20 17:07, Takashi Iwai wrote:
>>> At Mon, 20 Jan 2014 09:45:58 +0100,
>>> Takashi Iwai wrote:
>>>>
>>>> At Sun, 19 Jan 2014 21:30:58 +0100,
>>>> <baumber at hotmail.com> wrote:
>>>>>
>>>>> Hello,
>>>>>
>>>>> there must be a misunderstanding;
>>>>>
>>>>> There is a functional change, because with the line/patch ".reset_resume = usb_audio_resume," the mixer of the usb headset was not removed during suspend/resume and so the master channel in KDE Mixer was not changed (Headset), which is the correct behaviour.
>>>>>
>>>>> Without the line ".reset_resume = usb_audio_resume," in /sound/usb/card.c, the mixer was removed during suspend/resume and re-added, and so the master channel changed in KDE Mixer to the default onboard audio.
>>>>>
>>>>> I have tested kernel 3.13rc8, and as you mentioned, the "reset_resume"-messages are gone.
>>>>> But the behaviour of removing the mixer of the usb_audio_headset occurs, which is, in my opinion, not the correct behaviour, because the chosen master channel/mixer should stay after suspend/resume.
>>>>>
>>>>> Could you please take a look at the issue again.
>>
>>>> Simply adding usb_audio-resume to reset_resume ops doesn't work
>>>> properly as Clemens already suggested. It misses the recovery of the
>>>> current mixer values. This might work in some cases like S3 (where
>>>> the device is kept more or less powered on), but it'll be definitely
>>>> broken in some cases like S4.
>>
>> For my USB Logitech Headset (ID 046d:0a29 Logitech, Inc. H600 [Wireless Headset]) S3 and S4 are working (mixer resume), when using the "reset_resume" line/patch.
>
> You didn't change the mixer value (e.g. mute), right? Otherwise
> you'll have to notice the difference after S4.
I always let the last used mixer value stay (no mute), but I turn off the headset (power switch) before hibernate.
>>> ... and below is a quick fix with mixer resume code.
>>> It still doesn't handle some quirks, so it might break some devices.
>>
>> Thank you for your patch/quick fix, I'll try it.
>>
>> When can I expect a more complete solution for the mixer resume code, in the next kernel releases 3.14 or 3.15?
>
> Only after I get positive test reports. If I get them earlier, it can
> be in 3.14-rc1, as it's no too intrusive change. If not, it'll be in
> 3.15.
Thank you for your patch, it is working fine.
It works with hibernate, the mixer value stays and the master channel "headset" (kmix) is selected after hibernate as it should be.
When will the patch be in mainline => 3.14? and backported to LTS-kernels?
Do you know, what is the meaning of the following message in /var/log/Xorg.0.log ?
(EE) [dix] Logitech Logitech Wireless Headset: unable to find touch point 0
Thanks, Bernhard
> Takashi
>
>
>>
>> Thanks, Bernhard
>>
>>> Takashi
>>>
>>> -- >8 --
>>> From: Takashi Iwai <tiwai at suse.de>
>>> Subject: [PATCH] ALSA: usb-audio: Resume mixer values properly
>>>
>>> Implement reset_resume callback so that the mixer values are properly
>>> restored. Still no boot quirks are called, so it might not work well
>>> on some devices.
>>>
>>> Signed-off-by: Takashi Iwai <tiwai at suse.de>
>>> ---
>>> sound/usb/card.c | 18 ++++++++--
>>> sound/usb/mixer.c | 99 ++++++++++++++++++++++++++++++++++++++++++++-----------
>>> sound/usb/mixer.h | 7 ++--
>>> 3 files changed, 99 insertions(+), 25 deletions(-)
>>>
>>> diff --git a/sound/usb/card.c b/sound/usb/card.c
>>> index d979050e6a6a..025224136129 100644
>>> --- a/sound/usb/card.c
>>> +++ b/sound/usb/card.c
>>> @@ -691,12 +691,12 @@ static int usb_audio_suspend(struct usb_interface *intf, pm_message_t message)
>>> }
>>>
>>> list_for_each_entry(mixer, &chip->mixer_list, list)
>>> - snd_usb_mixer_inactivate(mixer);
>>> + snd_usb_mixer_suspend(mixer);
>>>
>>> return 0;
>>> }
>>>
>>> -static int usb_audio_resume(struct usb_interface *intf)
>>> +static int __usb_audio_resume(struct usb_interface *intf, bool reset_resume)
>>> {
>>> struct snd_usb_audio *chip = usb_get_intfdata(intf);
>>> struct usb_mixer_interface *mixer;
>>> @@ -711,7 +711,7 @@ static int usb_audio_resume(struct usb_interface *intf)
>>> * we just notify and restart the mixers
>>> */
>>> list_for_each_entry(mixer, &chip->mixer_list, list) {
>>> - err = snd_usb_mixer_activate(mixer);
>>> + err = snd_usb_mixer_resume(mixer, reset_resume);
>>> if (err < 0)
>>> goto err_out;
>>> }
>>> @@ -723,9 +723,20 @@ static int usb_audio_resume(struct usb_interface *intf)
>>> err_out:
>>> return err;
>>> }
>>> +
>>> +static int usb_audio_resume(struct usb_interface *intf)
>>> +{
>>> + return __usb_audio_resume(intf, false);
>>> +}
>>> +
>>> +static int usb_audio_reset_resume(struct usb_interface *intf)
>>> +{
>>> + return __usb_audio_resume(intf, true);
>>> +}
>>> #else
>>> #define usb_audio_suspend NULL
>>> #define usb_audio_resume NULL
>>> +#define usb_audio_reset_resume NULL
>>> #endif /* CONFIG_PM */
>>>
>>> static struct usb_device_id usb_audio_ids [] = {
>>> @@ -747,6 +758,7 @@ static struct usb_driver usb_audio_driver = {
>>> .disconnect = usb_audio_disconnect,
>>> .suspend = usb_audio_suspend,
>>> .resume = usb_audio_resume,
>>> + .reset_resume = usb_audio_reset_resume,
>>> .id_table = usb_audio_ids,
>>> .supports_autosuspend = 1,
>>> };
>>> diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c
>>> index 44b0ba4feab3..aa9bc19aae68 100644
>>> --- a/sound/usb/mixer.c
>>> +++ b/sound/usb/mixer.c
>>> @@ -2299,26 +2299,6 @@ requeue:
>>> }
>>> }
>>>
>>> -/* stop any bus activity of a mixer */
>>> -void snd_usb_mixer_inactivate(struct usb_mixer_interface *mixer)
>>> -{
>>> - usb_kill_urb(mixer->urb);
>>> - usb_kill_urb(mixer->rc_urb);
>>> -}
>>> -
>>> -int snd_usb_mixer_activate(struct usb_mixer_interface *mixer)
>>> -{
>>> - int err;
>>> -
>>> - if (mixer->urb) {
>>> - err = usb_submit_urb(mixer->urb, GFP_NOIO);
>>> - if (err < 0)
>>> - return err;
>>> - }
>>> -
>>> - return 0;
>>> -}
>>> -
>>> /* create the handler for the optional status interrupt endpoint */
>>> static int snd_usb_mixer_status_create(struct usb_mixer_interface *mixer)
>>> {
>>> @@ -2417,3 +2397,82 @@ void snd_usb_mixer_disconnect(struct list_head *p)
>>> usb_kill_urb(mixer->urb);
>>> usb_kill_urb(mixer->rc_urb);
>>> }
>>> +
>>> +#ifdef CONFIG_PM
>>> +/* stop any bus activity of a mixer */
>>> +static void snd_usb_mixer_inactivate(struct usb_mixer_interface *mixer)
>>> +{
>>> + usb_kill_urb(mixer->urb);
>>> + usb_kill_urb(mixer->rc_urb);
>>> +}
>>> +
>>> +static int snd_usb_mixer_activate(struct usb_mixer_interface *mixer)
>>> +{
>>> + int err;
>>> +
>>> + if (mixer->urb) {
>>> + err = usb_submit_urb(mixer->urb, GFP_NOIO);
>>> + if (err < 0)
>>> + return err;
>>> + }
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +int snd_usb_mixer_suspend(struct usb_mixer_interface *mixer)
>>> +{
>>> + snd_usb_mixer_inactivate(mixer);
>>> + return 0;
>>> +}
>>> +
>>> +static int restore_mixer_value(struct usb_mixer_elem_info *cval)
>>> +{
>>> + int c, err, idx;
>>> +
>>> + if (cval->cmask) {
>>> + idx = 0;
>>> + for (c = 0; c < MAX_CHANNELS; c++) {
>>> + if (!(cval->cmask & (1 << c)))
>>> + continue;
>>> + if (cval->cached & (1 << c)) {
>>> + err = set_cur_mix_value(cval, c + 1, idx,
>>> + cval->cache_val[idx]);
>>> + if (err < 0)
>>> + return err;
>>> + }
>>> + idx++;
>>> + }
>>> + } else {
>>> + /* master */
>>> + if (cval->cached) {
>>> + err = set_cur_mix_value(cval, 0, 0, *cval->cache_val);
>>> + if (err < 0)
>>> + return err;
>>> + }
>>> + }
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +int snd_usb_mixer_resume(struct usb_mixer_interface *mixer, bool reset_resume)
>>> +{
>>> + struct usb_mixer_elem_info *cval;
>>> + int id, err;
>>> +
>>> + /* FIXME: any mixer quirks? */
>>> +
>>> + if (reset_resume) {
>>> + /* restore cached mixer values */
>>> + for (id = 0; id < MAX_ID_ELEMS; id++) {
>>> + for (cval = mixer->id_elems[id]; cval;
>>> + cval = cval->next_id_elem) {
>>> + err = restore_mixer_value(cval);
>>> + if (err < 0)
>>> + return err;
>>> + }
>>> + }
>>> + }
>>> +
>>> + return snd_usb_mixer_activate(mixer);
>>> +}
>>> +#endif
>>> diff --git a/sound/usb/mixer.h b/sound/usb/mixer.h
>>> index aab80df201bd..73b1f649447b 100644
>>> --- a/sound/usb/mixer.h
>>> +++ b/sound/usb/mixer.h
>>> @@ -63,8 +63,6 @@ void snd_usb_mixer_notify_id(struct usb_mixer_interface *mixer, int unitid);
>>>
>>> int snd_usb_mixer_set_ctl_value(struct usb_mixer_elem_info *cval,
>>> int request, int validx, int value_set);
>>> -void snd_usb_mixer_inactivate(struct usb_mixer_interface *mixer);
>>> -int snd_usb_mixer_activate(struct usb_mixer_interface *mixer);
>>>
>>> int snd_usb_mixer_add_control(struct usb_mixer_interface *mixer,
>>> struct snd_kcontrol *kctl);
>>> @@ -72,4 +70,9 @@ int snd_usb_mixer_add_control(struct usb_mixer_interface *mixer,
>>> int snd_usb_mixer_vol_tlv(struct snd_kcontrol *kcontrol, int op_flag,
>>> unsigned int size, unsigned int __user *_tlv);
>>>
>>> +#ifdef CONFIG_PM
>>> +int snd_usb_mixer_suspend(struct usb_mixer_interface *mixer);
>>> +int snd_usb_mixer_resume(struct usb_mixer_interface *mixer, bool reset_resume);
>>> +#endif
>>> +
>>> #endif /* __USBMIXER_H */
>>>
>>
>
>
More information about the Alsa-devel
mailing list