[alsa-devel] [PATCH] ASoC: tlv320aic23: Remove spurious bits per word setting
Max Filippov
jcmvbkbc at gmail.com
Wed Mar 12 18:30:30 CET 2014
On Wed, Mar 12, 2014 at 5:33 PM, Mark Brown <broonie at kernel.org> wrote:
> From: Mark Brown <broonie at linaro.org>
>
> regmap should handle any byte ordering issues required, it is looking for
> a byte stream from the bus, so don't set 16 bits per word. This is likely
> to have tested out OK due to use of an unmerged SPI controller driver.
>
> Signed-off-by: Mark Brown <broonie at linaro.org>
> ---
> sound/soc/codecs/tlv320aic23-spi.c | 1 -
> 1 file changed, 1 deletion(-)
Tested-by: Max Filippov <jcmvbkbc at gmail.com>
> diff --git a/sound/soc/codecs/tlv320aic23-spi.c b/sound/soc/codecs/tlv320aic23-spi.c
> index 585aea436c6a..3b387e41d75d 100644
> --- a/sound/soc/codecs/tlv320aic23-spi.c
> +++ b/sound/soc/codecs/tlv320aic23-spi.c
> @@ -25,7 +25,6 @@ static int aic23_spi_probe(struct spi_device *spi)
>
> dev_dbg(&spi->dev, "probing tlv320aic23 spi device\n");
>
> - spi->bits_per_word = 16;
> spi->mode = SPI_MODE_0;
> ret = spi_setup(spi);
> if (ret < 0)
> --
> 1.9.0
>
--
Thanks.
-- Max
More information about the Alsa-devel
mailing list