[alsa-devel] [PATCH v2] ASoC: simple-card: overwrite cpu_dai->fmt with codec_dai->fmt

[Nicolin Chen]

On Wed, Mar 12, 2014 at 11:25:32AM +0200, Jyri Sarha wrote:
> On 03/12/2014 05:02 AM, Nicolin Chen wrote:
> >The current simple-card driver separates the daimft for cpu_dai and codec_dai.
> >So we might get different values for them (0x4003 and 0x1003 for example):
> >
> >asoc-simple-card sound-cs42888.12: cpu : 2024000.esai / 4003 / 132000000
> >asoc-simple-card sound-cs42888.12: codec : cs42888 / 1003 / 24576000
> >asoc-simple-card sound-cs42888.12: cs42888 <-> 2024000.esai mapping ok
> >
> >This is not allowed at all as we need to keep the DAIFMT settings identical
> >for both the ends of the link.
> >
> >Thus this patch fixes it by overwriting the cpu_dai->fmt with codec_dai->fmt
> >since we defined the DAIFMT_MASTER basing on CODEC at the first place while
> >the other bits are same.
> >
> >Signed-off-by: Nicolin Chen <Guangyu.Chen at freescale.com>
> >---
> Hi Nicolin,
> This patch is an improvement, but in my opinion the binding is still
> a bit confusing.
> 
> How about changing 'frame-master' and 'bitclock-master' to
> 'codec-frame-master' and 'codec-bitclock-master'. We could possibly
> keep the old names as aliases until all the .dts files out there
> have been fixed.
> 
> At the same go we could add SND_SOC_DAIFMT_MASTER_MASK here:
> 
> > /* get CPU/CODEC common format via simple-audio-card,format */
> > priv->daifmt = snd_soc_of_parse_daifmt(node, "simple-audio-card,") &
> >		(SND_SOC_DAIFMT_FORMAT_MASK | SND_SOC_DAIFMT_INV_MASK);
> 
> or leave the masking out all together. Can't see why
> SND_SOC_DAIFMT_CONT/GATED could not be defined at dai-link level
> too.
> 
> This way the norm would be defining the daifmt at link level. We
> could still keep the possibility to overwrite the setting at dai
> level if there is need for that.

Hi Jyri,

After looking at Morimoto-san's mail, I think there might be a better
solution for this issue as he suggested: We may move the fmt from
struct asoc_simple_dai to a common place for both CPU and CODEC.

I'm not sure if there's any defect from this idea, but as long as we
keep DAIFMT settings identical for both dai-link ends, it'll be a
neater way.

So I'd like to pend this patch and wait for further solution from that
topic.

Thank you,
Nicolin Chen