[alsa-devel] [PATCH 7/8] ASoC: pxa: tosa: Convert to table based DAPM and control setup
Lars-Peter Clausen
lars at metafoo.de
Sat Mar 1 15:48:19 CET 2014
Use table based setup to register the controls and DAPM widgets and routes. This
on one hand makes the code a bit shorter and cleaner and on the other hand the
board level DAPM elements get registered in the card's DAPM context rather than
in the CODEC's DAPM context.
Signed-off-by: Lars-Peter Clausen <lars at metafoo.de>
---
sound/soc/pxa/tosa.c | 36 +++++++++++++-----------------------
1 file changed, 13 insertions(+), 23 deletions(-)
diff --git a/sound/soc/pxa/tosa.c b/sound/soc/pxa/tosa.c
index cead165..4570725 100644
--- a/sound/soc/pxa/tosa.c
+++ b/sound/soc/pxa/tosa.c
@@ -44,10 +44,8 @@
static int tosa_jack_func;
static int tosa_spk_func;
-static void tosa_ext_control(struct snd_soc_codec *codec)
+static void tosa_ext_control(struct snd_soc_dapm_context *dapm)
{
- struct snd_soc_dapm_context *dapm = &codec->dapm;
-
snd_soc_dapm_mutex_lock(dapm);
/* set up jack connection */
@@ -82,10 +80,9 @@ static void tosa_ext_control(struct snd_soc_codec *codec)
static int tosa_startup(struct snd_pcm_substream *substream)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct snd_soc_codec *codec = rtd->codec;
/* check the jack status at stream startup */
- tosa_ext_control(codec);
+ tosa_ext_control(&rtd->card->dapm);
return 0;
}
@@ -104,13 +101,13 @@ static int tosa_get_jack(struct snd_kcontrol *kcontrol,
static int tosa_set_jack(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
- struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct snd_soc_card *card = snd_kcontrol_chip(kcontrol);
if (tosa_jack_func == ucontrol->value.integer.value[0])
return 0;
tosa_jack_func = ucontrol->value.integer.value[0];
- tosa_ext_control(codec);
+ tosa_ext_control(&card->dapm);
return 1;
}
@@ -124,13 +121,13 @@ static int tosa_get_spk(struct snd_kcontrol *kcontrol,
static int tosa_set_spk(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
- struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct snd_soc_card *card = snd_kcontrol_chip(kcontrol);
if (tosa_spk_func == ucontrol->value.integer.value[0])
return 0;
tosa_spk_func = ucontrol->value.integer.value[0];
- tosa_ext_control(codec);
+ tosa_ext_control(&card->dapm);
return 1;
}
@@ -191,24 +188,10 @@ static int tosa_ac97_init(struct snd_soc_pcm_runtime *rtd)
{
struct snd_soc_codec *codec = rtd->codec;
struct snd_soc_dapm_context *dapm = &codec->dapm;
- int err;
snd_soc_dapm_nc_pin(dapm, "OUT3");
snd_soc_dapm_nc_pin(dapm, "MONOOUT");
- /* add tosa specific controls */
- err = snd_soc_add_codec_controls(codec, tosa_controls,
- ARRAY_SIZE(tosa_controls));
- if (err < 0)
- return err;
-
- /* add tosa specific widgets */
- snd_soc_dapm_new_controls(dapm, tosa_dapm_widgets,
- ARRAY_SIZE(tosa_dapm_widgets));
-
- /* set up tosa specific audio path audio_map */
- snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map));
-
return 0;
}
@@ -239,6 +222,13 @@ static struct snd_soc_card tosa = {
.owner = THIS_MODULE,
.dai_link = tosa_dai,
.num_links = ARRAY_SIZE(tosa_dai),
+
+ .controls = tosa_controls,
+ .num_controls = ARRAY_SIZE(tosa_controls),
+ .dapm_widgets = tosa_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(tosa_dapm_widgets),
+ .dapm_routes = audio_map,
+ .num_dapm_routes = ARRAY_SIZE(audio_map),
};
static int tosa_probe(struct platform_device *pdev)
--
1.8.0
More information about the Alsa-devel
mailing list