[alsa-devel] [PATCH 4/8] ASoC: pxa: e800_wm9712: Convert to table based DAPM setup

[Lars-Peter Clausen]

Use table based setup to register the DAPM widgets and routes. This on one hand
makes the code a bit cleaner and on the other hand the board level DAPM elements
get registered in the card's DAPM context rather than in the CODEC's DAPM
context.

Signed-off-by: Lars-Peter Clausen <lars at metafoo.de>
---
 sound/soc/pxa/e800_wm9712.c | 19 +++++--------------
 1 file changed, 5 insertions(+), 14 deletions(-)

diff --git a/sound/soc/pxa/e800_wm9712.c b/sound/soc/pxa/e800_wm9712.c
index 3137f80..24c2078 100644
--- a/sound/soc/pxa/e800_wm9712.c
+++ b/sound/soc/pxa/e800_wm9712.c
@@ -71,19 +71,6 @@ static const struct snd_soc_dapm_route audio_map[] = {
 	{"MIC2", NULL, "Mic (Internal2)"},
 };
 
-static int e800_ac97_init(struct snd_soc_pcm_runtime *rtd)
-{
-	struct snd_soc_codec *codec = rtd->codec;
-	struct snd_soc_dapm_context *dapm = &codec->dapm;
-
-	snd_soc_dapm_new_controls(dapm, e800_dapm_widgets,
-					ARRAY_SIZE(e800_dapm_widgets));
-
-	snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map));
-
-	return 0;
-}
-
 static struct snd_soc_dai_link e800_dai[] = {
 	{
 		.name = "AC97",
@@ -92,7 +79,6 @@ static struct snd_soc_dai_link e800_dai[] = {
 		.codec_dai_name = "wm9712-hifi",
 		.platform_name = "pxa-pcm-audio",
 		.codec_name = "wm9712-codec",
-		.init = e800_ac97_init,
 	},
 	{
 		.name = "AC97 Aux",
@@ -109,6 +95,11 @@ static struct snd_soc_card e800 = {
 	.owner = THIS_MODULE,
 	.dai_link = e800_dai,
 	.num_links = ARRAY_SIZE(e800_dai),
+
+	.dapm_widgets = e800_dapm_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(e800_dapm_widgets),
+	.dapm_routes = audio_map,
+	.num_dapm_routes = ARRAY_SIZE(audio_map),
 };
 
 static struct gpio e800_audio_gpios[] = {
-- 
1.8.0