[alsa-devel] [PATCH] ucm: Document PlaybackPCMIsDummy and CapturePCMIsDummy values

[Takashi Iwai]

At Thu, 26 Jun 2014 13:30:25 +0300,
Tanu Kaskinen wrote:
> 
> At least PulseAudio needs special handling for dummy devices. To allow
> that to happen automatically, the UCM configuration should contain the
> information about which PCMs are dummy.
> 
> Signed-off-by: Tanu Kaskinen <tanu.kaskinen at linux.intel.com>

Thanks, applied with Liam's ack.


Takashi

> ---
>  include/use-case.h | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/include/use-case.h b/include/use-case.h
> index 4e13249..f30168f 100644
> --- a/include/use-case.h
> +++ b/include/use-case.h
> @@ -258,7 +258,17 @@ int snd_use_case_get_list(snd_use_case_mgr_t *uc_mgr,
>   * Recommended names for values:
>   *   TQ			- Tone Quality
>   *   PlaybackPCM	- full PCM playback device name
> + *   PlaybackPCMIsDummy	- Valid values: "yes" and "no". If set to "yes", the
> + *			  PCM named by the PlaybackPCM value is a dummy device,
> + *			  meaning that opening it enables an audio path in the
> + *			  hardware, but writing to the PCM device has no
> + *			  effect.
>   *   CapturePCM		- full PCM capture device name
> + *   CapturePCMIsDummy	- Valid values: "yes" and "no". If set to "yes", the
> + *			  PCM named by the CapturePCM value is a dummy device,
> + *			  meaning that opening it enables an audio path in the
> + *			  hardware, but reading from the PCM device has no
> + *			  effect.
>   *   PlaybackRate	- playback device sample rate
>   *   PlaybackChannels	- playback device channel count
>   *   PlaybackCTL	- playback control device name
> -- 
> 1.9.3
> 
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel at alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
>