[alsa-devel] [PATCH 2/2] ASoC: tas2552: Add DAPM calls for amp and PLL

[Murphy, Dan]

Mark
On 07/21/2014 06:54 AM, Mark Brown wrote:

On Fri, Jul 18, 2014 at 12:31:08PM -0500, Dan Murphy wrote:



+static int tas2552_class_d_en(struct snd_soc_dapm_widget *w,
+                          struct snd_kcontrol *kcontrol, int event)
+{
+       switch (event) {
+       case SND_SOC_DAPM_PRE_PMU:
+               snd_soc_update_bits(w->codec, TAS2552_CFG_2,
+                                                TAS2552_CLASSD_EN_MASK, TAS2552_CLASSD_EN_MASK);
+               break;
+       case SND_SOC_DAPM_POST_PMD:
+               snd_soc_update_bits(w->codec, TAS2552_CFG_2,
+                                                TAS2552_CLASSD_EN_MASK, 0);
+               break;
+       }
+
+       return 0;
+}
+
+static const struct snd_soc_dapm_widget tas2552_dapm_widgets[] =
+{
+SND_SOC_DAPM_PRE("Class D Enable", tas2552_class_d_en),
+SND_SOC_DAPM_POST("Class D Disable", tas2552_class_d_en),
+SND_SOC_DAPM_POST("PLL Disable", tas2552_pll_disable),
+};



This seems broken, having to use _PRE or _POST widgets for simple
register writes (or almost anything really) should never be required and
error prone - what is this actually trying to do?  I'd expect the class
D to be a PGA or OUTPUT widget and the PLL to be a SUPPLY widget.


I need a little help here.
I am not seeing the PLL being disabled or Class D being disabled when
I am using the DAPM calls

My implementation is like this.  And I use set these widgets and audio
map in the call back functions in the struct snd_soc_codec_driver.

When I look at the registers after stream playback I see that
the TAS2552_CFG_2 register is untouched

static const struct snd_soc_dapm_widget tas2552_dapm_widgets[] =
{
SND_SOC_DAPM_AIF_IN("DAC IN", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_DAC("DAC", NULL, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_OUT_DRV("ClassD Enable", TAS2552_CFG_2, 7, 0, NULL, 0),
SND_SOC_DAPM_OUT_DRV("ClassD Disable", TAS2552_CFG_2, 7, 1, NULL, 0),
SND_SOC_DAPM_SUPPLY("PLL Disable", TAS2552_CFG_2, 3, 1, NULL, 0),
SND_SOC_DAPM_OUTPUT("OUT")
};

static const struct snd_soc_dapm_route tas2552_audio_map[] = {
    {"DAC", NULL, "DAC IN"},
    {"ClassD Enable", NULL, "DAC"},
    {"OUT", NULL, "ClassD Enable"},
    {"ClassD Disable", NULL, "OUT"},
    {"PLL Disable", NULL, "ClassD Disable"}
};

Any information would help here

Thanks in advance

--
------------------
Dan Murphy