[alsa-devel] [PATCH 1/2] ASoC: fsl_sai: Reset FIFOs after disabling TE/RE

[Nicolin Chen]

SAI will not clear their FIFOs after disabling TE/RE. Therfore, the driver
should take care the task so as not to let useless data remain in the FIFO.

Signed-off-by: Nicolin Chen <nicoleotsuka at gmail.com>
---
 sound/soc/fsl/fsl_sai.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c
index c5a0e8a..b10dbd8 100644
--- a/sound/soc/fsl/fsl_sai.c
+++ b/sound/soc/fsl/fsl_sai.c
@@ -371,10 +371,13 @@ static int fsl_sai_trigger(struct snd_pcm_substream *substream, int cmd,
 
 		/* Check if the opposite FRDE is also disabled */
 		if (!(tx ? rcsr & FSL_SAI_CSR_FRDE : tcsr & FSL_SAI_CSR_FRDE)) {
+			/* Disable both directions and reset their FIFOs */
 			regmap_update_bits(sai->regmap, FSL_SAI_TCSR,
-					   FSL_SAI_CSR_TERE, 0);
+					   FSL_SAI_CSR_TERE | FSL_SAI_CSR_FR,
+					   FSL_SAI_CSR_FR);
 			regmap_update_bits(sai->regmap, FSL_SAI_RCSR,
-					   FSL_SAI_CSR_TERE, 0);
+					   FSL_SAI_CSR_TERE | FSL_SAI_CSR_FR,
+					   FSL_SAI_CSR_FR);
 		}
 		break;
 	default:
-- 
1.8.4