[alsa-devel] [PATCH V2 1/2] ASoC: samsung: Add machine driver for Odroid X2/U3

Sylwester Nawrocki s.nawrocki at samsung.com
Mon Jul 14 13:27:53 CEST 2014


On 30/06/14 20:46, Mark Brown wrote:
> On Wed, Jun 18, 2014 at 06:22:30PM +0200, Sylwester Nawrocki wrote:
> 
>> +struct odroidx2_drv_data odroidx2_drvdata = {
>> +	.dapm_widgets		= odroidx2_dapm_widgets,
>> +	.num_dapm_widgets	= ARRAY_SIZE(odroidx2_dapm_widgets),
>> +};
>> +
>> +struct odroidx2_drv_data odroidu3_drvdata = {
>> +	.dapm_widgets		= odroidu3_dapm_widgets,
>> +	.num_dapm_widgets	= ARRAY_SIZE(odroidu3_dapm_widgets),
>> +};
> 
>> +	ret = snd_soc_of_parse_audio_routing(card, "samsung,audio-routing");
>> +	if (ret < 0)
>> +		return ret;
> 
> Given that the widgets don't have any actions defined and the routing is
> all done by DT it might be easier and more flexible to just define all
> the widgets all the time and let them hang there if they're not in use,
> that way you don't need multiple compatible strings.  If you do that
> you're then very close to being able to use simple-card...

Too bad, I noticed this comment only just now.  I'll consider this and
will try again and see how simple-card could be used.  There is also the
samsung-i2s-sec secondary 'overlay' CPU DAI that would need to be handled,
and we have it now internally specified in the machine driver through
cpu_dai_name, rather than cpu_of_node.
There might be some more work in the driver needed to support the
secondary I2S interface generically with DT.

--
Regards,
Sylwester
--
To unsubscribe from this list: send the line "unsubscribe alsa-devel" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html



More information about the Alsa-devel mailing list