[alsa-devel] [PATCH 1/2] ASoC: dt-bindings: add rockchip i2s bindings
jianqun
xjq at rock-chips.com
Tue Jul 1 12:08:37 CEST 2014
From: Jianqun Xu <xjq at rock-chips.com>
Add devicetree bindings for i2s controller found on rk3066, rk3188 and rk3288
processors from rockchip.
Signed-off-by: Jianqun Xu <xjq at rock-chips.com>
---
Changes since v1:
- dt-bindings: change dmas and clocks description, adviced by mark.rutland
.../devicetree/bindings/sound/rockchip-i2s.txt | 44 ++++++++++++++++++++
1 file changed, 44 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/rockchip-i2s.txt
diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt
new file mode 100644
index 0000000..db26e09
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt
@@ -0,0 +1,44 @@
+* Rockchip I2S controller
+
+The I2S bus (Inter-IC sound bus) is a serial link for digital audio data transfer
+between devices in the system and be invented by Philips Semiconductor.
+
+Required properties:
+
+- compatible : should be one of the following.
+ "rockchip,rk3066-i2s": for rk3066
+ "rockchip,rk3188-i2s", "rockchip,rk3066-i2s" for rk3188
+ "rockchip,rk3288-i2s", "rockchip,rk3066-i2s" for rk3288
+- reg : physical base address of the controller and length of memory mapped
+ region.
+- interrupts : The interrupt number to the cpu. The interrupt specifier format
+ depends on the interrupt controller.
+- #address-cells : should be 1.
+- #size-cells : should be 0.
+- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
+ Documentation/devicetree/bindings/dma/dma.txt
+- dma-names: DMA request names should include "tx" and "rx" if present.
+- clocks : a list of phandle + clock-specifer pairs, one for each entry in clock-names.
+- clock-names : Should include "i2s_hclk" and "i2s_clk",
+ - "i2s_hclk": support AHB bus interface
+ - "i2s_clk": work clock for i2s controller
+- aliases : Since device need i2s channel number as part of device's name,
+ driver will get its id by of_alias_get_id(np, "i2s").
+
+Example:
+
+aliases {
+ i2s0 = &i2s0;
+}
+
+i2s0: i2s at ff890000 {
+ compatible = "rockchip,rk3066-i2s";
+ reg = <0xff890000 0x10000>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dmas = <&pdma1 0>, <&pdma1 1>;
+ dma-names = "rx", "tx";
+ clock-names = "i2s_hclk", "i2s_clk";
+ clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
+};
--
1.7.9.5
More information about the Alsa-devel
mailing list