[alsa-devel] Problems with simple-card

[Mark Brown]

On Wed, Jan 15, 2014 at 07:18:31PM +0100, Jean-Francois Moine wrote:

> The main problem is about sysclk: when there is no clock in the DT,
> you get the clock of the CPU or CODEC DAI. In my system, two clocks
> are declared in the controller CPU DAI, but there is no .set_sysclk
> pointer. So, snd_soc_dai_set_sysclk() returns -EINVAL and the card is
> not created.

set_sysclk() should be returning -ENOTSUPP in this case as with
set_fmt() and the generic code then ignoring that error.

> As I don't know why you need these fmt and sysclk, may you have a
> look at these problems?

The overwhelming majority of combinations of devices need a format
specifying (usually one will be imposed by the system design even if
both devices could be master).
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://mailman.alsa-project.org/pipermail/alsa-devel/attachments/20140115/0220abee/attachment.sig>