[alsa-devel] [RFC 04/19] ALSA: hda - Use device pointer from the card instead of pci
Dylan Reid
dgreid at chromium.org
Fri Feb 28 07:35:47 CET 2014
This removes calls to get the device via PCI from other parts of the
code that will be able to be re-used by the platform driver.
Signed-off-by: Dylan Reid <dgreid at chromium.org>
---
sound/pci/hda/hda_intel.c | 27 ++++++++++++++-------------
1 file changed, 14 insertions(+), 13 deletions(-)
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 8eec5cb..053137e 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -405,7 +405,7 @@ static int azx_alloc_cmd_io(struct azx *chip)
/* single page (at least 4096 bytes) must suffice for both ringbuffes */
err = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV,
- snd_dma_pci_data(chip->pci),
+ chip->card->dev,
PAGE_SIZE, &chip->rb);
if (err < 0) {
dev_err(chip->card->dev, "cannot allocate CORB/RIRB\n");
@@ -1051,7 +1051,7 @@ static irqreturn_t azx_interrupt(int irq, void *dev_id)
#ifdef CONFIG_PM_RUNTIME
if (chip->driver_caps & AZX_DCAPS_PM_RUNTIME)
- if (chip->pci->dev.power.runtime_status != RPM_ACTIVE)
+ if (chip->card->dev->power.runtime_status != RPM_ACTIVE)
return IRQ_NONE;
#endif
@@ -2306,7 +2306,7 @@ azx_attach_pcm_stream(struct hda_bus *bus, struct hda_codec *codec,
if (size > MAX_PREALLOC_SIZE)
size = MAX_PREALLOC_SIZE;
snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV_SG,
- snd_dma_pci_data(chip->pci),
+ chip->card->dev,
size, MAX_PREALLOC_SIZE);
/* link to codec */
pcm->dev = &codec->dev;
@@ -2421,7 +2421,7 @@ static int azx_load_dsp_prepare(struct hda_bus *bus, unsigned int format,
spin_unlock_irq(&chip->reg_lock);
err = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV_SG,
- snd_dma_pci_data(chip->pci),
+ chip->card->dev,
byte_size, bufp);
if (err < 0)
goto err_alloc;
@@ -2514,9 +2514,9 @@ static void azx_power_notify(struct hda_bus *bus, bool power_up)
return;
if (power_up)
- pm_runtime_get_sync(&chip->pci->dev);
+ pm_runtime_get_sync(chip->card->dev);
else
- pm_runtime_put_sync(&chip->pci->dev);
+ pm_runtime_put_sync(chip->card->dev);
}
static DEFINE_MUTEX(card_list_lock);
@@ -2781,8 +2781,8 @@ static void azx_vs_set_state(struct pci_dev *pci,
dev_info(chip->card->dev, "%s via VGA-switcheroo\n",
disabled ? "Disabling" : "Enabling");
if (disabled) {
- pm_runtime_put_sync_suspend(&pci->dev);
- azx_suspend(&pci->dev);
+ pm_runtime_put_sync_suspend(card->dev);
+ azx_suspend(card->dev);
/* when we get suspended by vga switcheroo we end up in D3cold,
* however we have no ACPI handle, so pci/acpi can't put us there,
* put ourselves there */
@@ -2793,9 +2793,9 @@ static void azx_vs_set_state(struct pci_dev *pci,
"Cannot lock devices!\n");
} else {
snd_hda_unlock_devices(chip->bus);
- pm_runtime_get_noresume(&pci->dev);
+ pm_runtime_get_noresume(card->dev);
chip->disabled = false;
- azx_resume(&pci->dev);
+ azx_resume(card->dev);
}
}
}
@@ -2849,7 +2849,8 @@ static int register_vga_switcheroo(struct azx *chip)
chip->vga_switcheroo_registered = 1;
/* register as an optimus hdmi audio power domain */
- vga_switcheroo_init_domain_pm_optimus_hdmi_audio(&chip->pci->dev, &chip->hdmi_pm_domain);
+ vga_switcheroo_init_domain_pm_optimus_hdmi_audio(chip->card->dev,
+ &chip->hdmi_pm_domain);
return 0;
}
#else
@@ -3364,7 +3365,7 @@ static int azx_first_init(struct azx *chip)
dsp_lock_init(&chip->azx_dev[i]);
/* allocate memory for the BDL for each stream */
err = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV,
- snd_dma_pci_data(chip->pci),
+ chip->card->dev,
BDL_SIZE, &chip->azx_dev[i].bdl);
if (err < 0) {
dev_err(card->dev, "cannot allocate BDL\n");
@@ -3374,7 +3375,7 @@ static int azx_first_init(struct azx *chip)
}
/* allocate memory for the position buffer */
err = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV,
- snd_dma_pci_data(chip->pci),
+ chip->card->dev,
chip->num_streams * 8, &chip->posbuf);
if (err < 0) {
dev_err(card->dev, "cannot allocate posbuf\n");
--
1.8.1.3.605.g02339dd
More information about the Alsa-devel
mailing list