[alsa-devel] [PATCH 08/15] ASoC: fsl-ssi: Cleanup probe function
Markus Pargmann
mpa at pengutronix.de
Wed Feb 26 17:02:11 CET 2014
Reorder the probe function to be able to move the second imx-specific
block to the seperate imx probe function. The patch also removes some
comments/variables/code that are not used anymore or could be simply
replaced by other variables.
Signed-off-by: Markus Pargmann <mpa at pengutronix.de>
---
sound/soc/fsl/fsl_ssi.c | 110 +++++++++++++++++++++---------------------------
1 file changed, 49 insertions(+), 61 deletions(-)
diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index 64d188f..59e35a4 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -149,7 +149,6 @@ struct fsl_ssi_private {
bool imx_ac97;
bool use_dma;
bool baudclk_locked;
- bool irq_stats;
bool offline_config;
bool use_dual_fifo;
spinlock_t baudclk_lock;
@@ -972,7 +971,7 @@ static void make_lowercase(char *s)
}
static int fsl_ssi_imx_probe(struct platform_device *pdev,
- struct fsl_ssi_private *ssi_private)
+ struct fsl_ssi_private *ssi_private, void __iomem *iomem)
{
struct device_node *np = pdev->dev.of_node;
u32 dmas[4];
@@ -1028,8 +1027,37 @@ static int fsl_ssi_imx_probe(struct platform_device *pdev,
ssi_private->dma_params_rx.maxburst &= ~0x1;
}
+ if (!ssi_private->use_dma) {
+
+ /*
+ * Some boards use an incompatible codec. To get it
+ * working, we are using imx-fiq-pcm-audio, that
+ * can handle those codecs. DMA is not possible in this
+ * situation.
+ */
+
+ ssi_private->fiq_params.irq = ssi_private->irq;
+ ssi_private->fiq_params.base = iomem;
+ ssi_private->fiq_params.dma_params_rx =
+ &ssi_private->dma_params_rx;
+ ssi_private->fiq_params.dma_params_tx =
+ &ssi_private->dma_params_tx;
+
+ ret = imx_pcm_fiq_init(pdev, &ssi_private->fiq_params);
+ if (ret)
+ goto error_pcm;
+ } else {
+ ret = imx_pcm_dma_init(pdev);
+ if (ret)
+ goto error_pcm;
+ }
+
return 0;
+error_pcm:
+ if (!IS_ERR(ssi_private->baudclk))
+ clk_disable_unprepare(ssi_private->baudclk);
+
error_baud_clk:
clk_disable_unprepare(ssi_private->clk);
@@ -1039,6 +1067,8 @@ error_baud_clk:
static void fsl_ssi_imx_clean(struct platform_device *pdev,
struct fsl_ssi_private *ssi_private)
{
+ if (!ssi_private->use_dma)
+ imx_pcm_fiq_exit(pdev);
if (!IS_ERR(ssi_private->baudclk))
clk_disable_unprepare(ssi_private->baudclk);
clk_disable_unprepare(ssi_private->clk);
@@ -1048,7 +1078,6 @@ static int fsl_ssi_probe(struct platform_device *pdev)
{
struct fsl_ssi_private *ssi_private;
int ret = 0;
- struct device_attribute *dev_attr = NULL;
struct device_node *np = pdev->dev.of_node;
const struct of_device_id *of_id;
enum fsl_ssi_type hw_type;
@@ -1150,6 +1179,8 @@ static int fsl_ssi_probe(struct platform_device *pdev)
ssi_private->baudclk_locked = false;
spin_lock_init(&ssi_private->baudclk_lock);
+ dev_set_drvdata(&pdev->dev, ssi_private);
+
/*
* imx51 and later SoCs have a slightly different IP that allows the
* SSI configuration while the SSI unit is running.
@@ -1180,20 +1211,22 @@ static int fsl_ssi_probe(struct platform_device *pdev)
hw_type == FSL_SSI_MX35) {
ssi_private->ssi_on_imx = true;
- ret = fsl_ssi_imx_probe(pdev, ssi_private);
+ ret = fsl_ssi_imx_probe(pdev, ssi_private, iomem);
if (ret)
goto error_irqmap;
}
- /*
- * Enable interrupts only for MCP8610 and MX51. The other MXs have
- * different writeable interrupt status registers.
- */
+ ret = snd_soc_register_component(&pdev->dev, &fsl_ssi_component,
+ &ssi_private->cpu_dai_drv, 1);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register DAI: %d\n", ret);
+ goto error_asoc_register;
+ }
+
if (ssi_private->use_dma) {
ret = devm_request_irq(&pdev->dev, ssi_private->irq,
fsl_ssi_isr, 0, ssi_private->name,
ssi_private);
- ssi_private->irq_stats = true;
if (ret < 0) {
dev_err(&pdev->dev, "could not claim irq %u\n",
ssi_private->irq);
@@ -1201,47 +1234,9 @@ static int fsl_ssi_probe(struct platform_device *pdev)
}
}
- /* Register with ASoC */
- dev_set_drvdata(&pdev->dev, ssi_private);
-
- ret = snd_soc_register_component(&pdev->dev, &fsl_ssi_component,
- &ssi_private->cpu_dai_drv, 1);
- if (ret) {
- dev_err(&pdev->dev, "failed to register DAI: %d\n", ret);
- goto error_dev;
- }
-
ret = fsl_ssi_debugfs_create(&ssi_private->dbg_stats, &pdev->dev);
if (ret)
- goto error_dbgfs;
-
-
- if (ssi_private->ssi_on_imx) {
- if (!ssi_private->use_dma) {
-
- /*
- * Some boards use an incompatible codec. To get it
- * working, we are using imx-fiq-pcm-audio, that
- * can handle those codecs. DMA is not possible in this
- * situation.
- */
-
- ssi_private->fiq_params.irq = ssi_private->irq;
- ssi_private->fiq_params.base = iomem;
- ssi_private->fiq_params.dma_params_rx =
- &ssi_private->dma_params_rx;
- ssi_private->fiq_params.dma_params_tx =
- &ssi_private->dma_params_tx;
-
- ret = imx_pcm_fiq_init(pdev, &ssi_private->fiq_params);
- if (ret)
- goto error_pcm;
- } else {
- ret = imx_pcm_dma_init(pdev);
- if (ret)
- goto error_pcm;
- }
- }
+ goto error_asoc_register;
/*
* If codec-handle property is missing from SSI node, we assume
@@ -1271,32 +1266,25 @@ static int fsl_ssi_probe(struct platform_device *pdev)
if (IS_ERR(ssi_private->pdev)) {
ret = PTR_ERR(ssi_private->pdev);
dev_err(&pdev->dev, "failed to register platform: %d\n", ret);
- goto error_dai;
+ goto error_sound_card;
}
done:
return 0;
-error_dai:
- if (ssi_private->ssi_on_imx && !ssi_private->use_dma)
- imx_pcm_fiq_exit(pdev);
-
-error_pcm:
+error_sound_card:
fsl_ssi_debugfs_remove(&ssi_private->dbg_stats);
-error_dbgfs:
+error_irq:
snd_soc_unregister_component(&pdev->dev);
-error_dev:
- device_remove_file(&pdev->dev, dev_attr);
-
-error_irq:
+error_asoc_register:
if (ssi_private->ssi_on_imx) {
fsl_ssi_imx_clean(pdev, ssi_private);
}
error_irqmap:
- if (ssi_private->irq_stats)
+ if (ssi_private->use_dma)
irq_dispose_mapping(ssi_private->irq);
return ret;
@@ -1315,7 +1303,7 @@ static int fsl_ssi_remove(struct platform_device *pdev)
if (ssi_private->ssi_on_imx)
fsl_ssi_imx_clean(pdev, ssi_private);
- if (ssi_private->irq_stats)
+ if (ssi_private->use_dma)
irq_dispose_mapping(ssi_private->irq);
return 0;
--
1.8.5.3
More information about the Alsa-devel
mailing list