[alsa-devel] [PATCH 23/48] ALSA: via82xx: Use standard printk helpers
Takashi Iwai
tiwai at suse.de
Wed Feb 26 16:53:25 CET 2014
Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: Takashi Iwai <tiwai at suse.de>
---
sound/pci/via82xx.c | 69 ++++++++++++++++++++++++++++++-----------------------
1 file changed, 39 insertions(+), 30 deletions(-)
diff --git a/sound/pci/via82xx.c b/sound/pci/via82xx.c
index 20d2eeeecf47..95b98f537b67 100644
--- a/sound/pci/via82xx.c
+++ b/sound/pci/via82xx.c
@@ -459,7 +459,7 @@ static int build_via_table(struct viadev *dev, struct snd_pcm_substream *substre
unsigned int addr;
if (idx >= VIA_TABLE_SIZE) {
- snd_printk(KERN_ERR "via82xx: too much table size!\n");
+ dev_err(&pci->dev, "too much table size!\n");
return -EINVAL;
}
addr = snd_pcm_sgbuf_get_addr(substream, ofs);
@@ -474,8 +474,9 @@ static int build_via_table(struct viadev *dev, struct snd_pcm_substream *substre
} else
flag = 0; /* period continues to the next */
/*
- printk(KERN_DEBUG "via: tbl %d: at %d size %d "
- "(rest %d)\n", idx, ofs, r, rest);
+ dev_dbg(&pci->dev,
+ "tbl %d: at %d size %d (rest %d)\n",
+ idx, ofs, r, rest);
*/
((u32 *)dev->table.area)[(idx<<1) + 1] = cpu_to_le32(r | flag);
dev->idx_table[idx].offset = ofs;
@@ -528,7 +529,7 @@ static int snd_via82xx_codec_ready(struct via82xx *chip, int secondary)
if (!((val = snd_via82xx_codec_xread(chip)) & VIA_REG_AC97_BUSY))
return val & 0xffff;
}
- snd_printk(KERN_ERR "codec_ready: codec %i is not ready [0x%x]\n",
+ dev_err(chip->card->dev, "codec_ready: codec %i is not ready [0x%x]\n",
secondary, snd_via82xx_codec_xread(chip));
return -EIO;
}
@@ -587,7 +588,8 @@ static unsigned short snd_via82xx_codec_read(struct snd_ac97 *ac97, unsigned sho
xval |= (reg & 0x7f) << VIA_REG_AC97_CMD_SHIFT;
while (1) {
if (again++ > 3) {
- snd_printk(KERN_ERR "codec_read: codec %i is not valid [0x%x]\n",
+ dev_err(chip->card->dev,
+ "codec_read: codec %i is not valid [0x%x]\n",
ac97->num, snd_via82xx_codec_xread(chip));
return 0xffff;
}
@@ -777,7 +779,9 @@ static int snd_via82xx_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
((pos) < viadev->lastpos && ((pos) >= viadev->bufsize2 ||\
viadev->lastpos < viadev->bufsize2))
-static inline unsigned int calc_linear_pos(struct viadev *viadev, unsigned int idx,
+static inline unsigned int calc_linear_pos(struct via82xx *chip,
+ struct viadev *viadev,
+ unsigned int idx,
unsigned int count)
{
unsigned int size, base, res;
@@ -790,7 +794,8 @@ static inline unsigned int calc_linear_pos(struct viadev *viadev, unsigned int i
/* check the validity of the calculated position */
if (size < count) {
- snd_printd(KERN_ERR "invalid via82xx_cur_ptr (size = %d, count = %d)\n",
+ dev_dbg(chip->card->dev,
+ "invalid via82xx_cur_ptr (size = %d, count = %d)\n",
(int)size, (int)count);
res = viadev->lastpos;
} else {
@@ -807,9 +812,9 @@ static inline unsigned int calc_linear_pos(struct viadev *viadev, unsigned int i
}
if (check_invalid_pos(viadev, res)) {
#ifdef POINTER_DEBUG
- printk(KERN_DEBUG "fail: idx = %i/%i, lastpos = 0x%x, "
- "bufsize2 = 0x%x, offsize = 0x%x, size = 0x%x, "
- "count = 0x%x\n", idx, viadev->tbl_entries,
+ dev_dbg(chip->card->dev,
+ "fail: idx = %i/%i, lastpos = 0x%x, bufsize2 = 0x%x, offsize = 0x%x, size = 0x%x, count = 0x%x\n",
+ idx, viadev->tbl_entries,
viadev->lastpos, viadev->bufsize2,
viadev->idx_table[idx].offset,
viadev->idx_table[idx].size, count);
@@ -817,8 +822,8 @@ static inline unsigned int calc_linear_pos(struct viadev *viadev, unsigned int i
/* count register returns full size when end of buffer is reached */
res = base + size;
if (check_invalid_pos(viadev, res)) {
- snd_printd(KERN_ERR "invalid via82xx_cur_ptr (2), "
- "using last valid pointer\n");
+ dev_dbg(chip->card->dev,
+ "invalid via82xx_cur_ptr (2), using last valid pointer\n");
res = viadev->lastpos;
}
}
@@ -850,7 +855,7 @@ static snd_pcm_uframes_t snd_via686_pcm_pointer(struct snd_pcm_substream *substr
idx = 0;
else /* CURR_PTR holds the address + 8 */
idx = ((ptr - (unsigned int)viadev->table.addr) / 8 - 1) % viadev->tbl_entries;
- res = calc_linear_pos(viadev, idx, count);
+ res = calc_linear_pos(chip, viadev, idx, count);
viadev->lastpos = res; /* remember the last position */
spin_unlock(&chip->reg_lock);
@@ -889,13 +894,14 @@ static snd_pcm_uframes_t snd_via8233_pcm_pointer(struct snd_pcm_substream *subst
idx = count >> 24;
if (idx >= viadev->tbl_entries) {
#ifdef POINTER_DEBUG
- printk(KERN_DEBUG "fail: invalid idx = %i/%i\n", idx,
+ dev_dbg(chip->card->dev,
+ "fail: invalid idx = %i/%i\n", idx,
viadev->tbl_entries);
#endif
res = viadev->lastpos;
} else {
count &= 0xffffff;
- res = calc_linear_pos(viadev, idx, count);
+ res = calc_linear_pos(chip, viadev, idx, count);
}
} else {
res = viadev->hwptr_done;
@@ -1940,14 +1946,15 @@ static int snd_via686_create_gameport(struct via82xx *chip, unsigned char *legac
r = request_region(JOYSTICK_ADDR, 8, "VIA686 gameport");
if (!r) {
- printk(KERN_WARNING "via82xx: cannot reserve joystick port %#x\n",
+ dev_warn(chip->card->dev, "cannot reserve joystick port %#x\n",
JOYSTICK_ADDR);
return -EBUSY;
}
chip->gameport = gp = gameport_allocate_port();
if (!gp) {
- printk(KERN_ERR "via82xx: cannot allocate memory for gameport\n");
+ dev_err(chip->card->dev,
+ "cannot allocate memory for gameport\n");
release_and_free_resource(r);
return -ENOMEM;
}
@@ -2016,7 +2023,8 @@ static int snd_via8233_init_misc(struct via82xx *chip)
strcpy(sid.name, "PCM Playback Volume");
sid.iface = SNDRV_CTL_ELEM_IFACE_MIXER;
if (! snd_ctl_find_id(chip->card, &sid)) {
- snd_printd(KERN_INFO "Using DXS as PCM Playback\n");
+ dev_info(chip->card->dev,
+ "Using DXS as PCM Playback\n");
err = snd_ctl_add(chip->card, snd_ctl_new1(&snd_via8233_pcmdxs_volume_control, chip));
if (err < 0)
return err;
@@ -2102,8 +2110,9 @@ static int snd_via686_init_misc(struct via82xx *chip)
mpu_port, MPU401_INFO_INTEGRATED |
MPU401_INFO_IRQ_HOOK, -1,
&chip->rmidi) < 0) {
- printk(KERN_WARNING "unable to initialize MPU-401"
- " at 0x%lx, skipping\n", mpu_port);
+ dev_warn(chip->card->dev,
+ "unable to initialize MPU-401 at 0x%lx, skipping\n",
+ mpu_port);
legacy &= ~VIA_FUNC_ENABLE_MIDI;
} else {
legacy &= ~VIA_FUNC_MIDI_IRQMASK; /* enable MIDI interrupt */
@@ -2203,7 +2212,8 @@ static int snd_via82xx_chip_init(struct via82xx *chip)
} while (time_before(jiffies, end_time));
if ((val = snd_via82xx_codec_xread(chip)) & VIA_REG_AC97_BUSY)
- snd_printk(KERN_ERR "AC'97 codec is not ready [0x%x]\n", val);
+ dev_err(chip->card->dev,
+ "AC'97 codec is not ready [0x%x]\n", val);
#if 0 /* FIXME: we don't support the second codec yet so skip the detection now.. */
snd_via82xx_codec_xwrite(chip, VIA_REG_AC97_READ |
@@ -2303,8 +2313,7 @@ static int snd_via82xx_resume(struct device *dev)
pci_set_power_state(pci, PCI_D0);
pci_restore_state(pci);
if (pci_enable_device(pci) < 0) {
- printk(KERN_ERR "via82xx: pci_enable_device failed, "
- "disabling device\n");
+ dev_err(dev, "pci_enable_device failed, disabling device\n");
snd_card_disconnect(card);
return -EIO;
}
@@ -2417,7 +2426,7 @@ static int snd_via82xx_create(struct snd_card *card,
snd_via8233_interrupt : snd_via686_interrupt,
IRQF_SHARED,
KBUILD_MODNAME, chip)) {
- snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
+ dev_err(card->dev, "unable to grab IRQ %d\n", pci->irq);
snd_via82xx_free(chip);
return -EBUSY;
}
@@ -2514,7 +2523,7 @@ static int check_dxs_list(struct pci_dev *pci, int revision)
w = snd_pci_quirk_lookup(pci, dxs_whitelist);
if (w) {
- snd_printdd(KERN_INFO "via82xx: DXS white list for %s found\n",
+ dev_dbg(&pci->dev, "DXS white list for %s found\n",
snd_pci_quirk_name(w));
return w->value;
}
@@ -2526,10 +2535,10 @@ static int check_dxs_list(struct pci_dev *pci, int revision)
/*
* not detected, try 48k rate only to be sure.
*/
- printk(KERN_INFO "via82xx: Assuming DXS channels with 48k fixed sample rate.\n");
- printk(KERN_INFO " Please try dxs_support=5 option\n");
- printk(KERN_INFO " and report if it works on your machine.\n");
- printk(KERN_INFO " For more details, read ALSA-Configuration.txt.\n");
+ dev_info(&pci->dev, "Assuming DXS channels with 48k fixed sample rate.\n");
+ dev_info(&pci->dev, " Please try dxs_support=5 option\n");
+ dev_info(&pci->dev, " and report if it works on your machine.\n");
+ dev_info(&pci->dev, " For more details, read ALSA-Configuration.txt.\n");
return VIA_DXS_48K;
};
@@ -2582,7 +2591,7 @@ static int snd_via82xx_probe(struct pci_dev *pci,
strcpy(card->driver, "VIA8233");
break;
default:
- snd_printk(KERN_ERR "invalid card type %d\n", card_type);
+ dev_err(card->dev, "invalid card type %d\n", card_type);
err = -EINVAL;
goto __error;
}
--
1.9.0
More information about the Alsa-devel
mailing list