[alsa-devel] [PATCH 25/48] ALSA: ac97: Use standard printk helpers
Takashi Iwai
tiwai at suse.de
Wed Feb 26 16:53:27 CET 2014
Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: Takashi Iwai <tiwai at suse.de>
---
sound/pci/ac97/ac97_codec.c | 45 +++++++++++++++++++++++++++++++++------------
sound/pci/ac97/ac97_patch.c | 3 ++-
sound/pci/ac97/ac97_pcm.c | 15 +++++++++++----
3 files changed, 46 insertions(+), 17 deletions(-)
diff --git a/sound/pci/ac97/ac97_codec.c b/sound/pci/ac97/ac97_codec.c
index bf578ba2677e..14ad54b7928c 100644
--- a/sound/pci/ac97/ac97_codec.c
+++ b/sound/pci/ac97/ac97_codec.c
@@ -214,6 +214,12 @@ static void update_power_regs(struct snd_ac97 *ac97);
#define ac97_is_power_save_mode(ac97) 0
#endif
+#define ac97_err(ac97, fmt, args...) \
+ dev_err((ac97)->bus->card->dev, fmt, ##args)
+#define ac97_warn(ac97, fmt, args...) \
+ dev_warn((ac97)->bus->card->dev, fmt, ##args)
+#define ac97_dbg(ac97, fmt, args...) \
+ dev_dbg((ac97)->bus->card->dev, fmt, ##args)
/*
* I/O routines
@@ -1673,7 +1679,7 @@ static int snd_ac97_modem_build(struct snd_card *card, struct snd_ac97 * ac97)
int err, idx;
/*
- printk(KERN_DEBUG "AC97_GPIO_CFG = %x\n",
+ ac97_dbg(ac97, "AC97_GPIO_CFG = %x\n",
snd_ac97_read(ac97,AC97_GPIO_CFG));
*/
snd_ac97_write(ac97, AC97_GPIO_CFG, 0xffff & ~(AC97_GPIO_LINE1_OH));
@@ -1963,7 +1969,7 @@ static int snd_ac97_dev_register(struct snd_device *device)
ac97->bus->card->number, ac97->num,
snd_ac97_get_short_name(ac97));
if ((err = device_register(&ac97->dev)) < 0) {
- snd_printk(KERN_ERR "Can't register ac97 bus\n");
+ ac97_err(ac97, "Can't register ac97 bus\n");
ac97->dev.bus = NULL;
return err;
}
@@ -2089,7 +2095,8 @@ int snd_ac97_mixer(struct snd_ac97_bus *bus, struct snd_ac97_template *template,
msecs_to_jiffies(500), 1);
}
if (err < 0) {
- snd_printk(KERN_WARNING "AC'97 %d does not respond - RESET\n", ac97->num);
+ ac97_warn(ac97, "AC'97 %d does not respond - RESET\n",
+ ac97->num);
/* proceed anyway - it's often non-critical */
}
}
@@ -2098,7 +2105,9 @@ int snd_ac97_mixer(struct snd_ac97_bus *bus, struct snd_ac97_template *template,
ac97->id |= snd_ac97_read(ac97, AC97_VENDOR_ID2);
if (! (ac97->scaps & AC97_SCAP_DETECT_BY_VENDOR) &&
(ac97->id == 0x00000000 || ac97->id == 0xffffffff)) {
- snd_printk(KERN_ERR "AC'97 %d access is not valid [0x%x], removing mixer.\n", ac97->num, ac97->id);
+ ac97_err(ac97,
+ "AC'97 %d access is not valid [0x%x], removing mixer.\n",
+ ac97->num, ac97->id);
snd_ac97_free(ac97);
return -EIO;
}
@@ -2131,7 +2140,9 @@ int snd_ac97_mixer(struct snd_ac97_bus *bus, struct snd_ac97_template *template,
if (!ac97_is_audio(ac97) && !ac97_is_modem(ac97)) {
if (!(ac97->scaps & (AC97_SCAP_SKIP_AUDIO|AC97_SCAP_SKIP_MODEM)))
- snd_printk(KERN_ERR "AC'97 %d access error (not audio or modem codec)\n", ac97->num);
+ ac97_err(ac97,
+ "AC'97 %d access error (not audio or modem codec)\n",
+ ac97->num);
snd_ac97_free(ac97);
return -EACCES;
}
@@ -2156,7 +2167,8 @@ int snd_ac97_mixer(struct snd_ac97_bus *bus, struct snd_ac97_template *template,
goto __ready_ok;
schedule_timeout_uninterruptible(1);
} while (time_after_eq(end_time, jiffies));
- snd_printk(KERN_WARNING "AC'97 %d analog subsections not ready\n", ac97->num);
+ ac97_warn(ac97,
+ "AC'97 %d analog subsections not ready\n", ac97->num);
}
/* FIXME: add powerdown control */
@@ -2188,7 +2200,10 @@ int snd_ac97_mixer(struct snd_ac97_bus *bus, struct snd_ac97_template *template,
goto __ready_ok;
schedule_timeout_uninterruptible(1);
} while (time_after_eq(end_time, jiffies));
- snd_printk(KERN_WARNING "MC'97 %d converters and GPIO not ready (0x%x)\n", ac97->num, snd_ac97_read(ac97, AC97_EXTENDED_MSTATUS));
+ ac97_warn(ac97,
+ "MC'97 %d converters and GPIO not ready (0x%x)\n",
+ ac97->num,
+ snd_ac97_read(ac97, AC97_EXTENDED_MSTATUS));
}
__ready_ok:
@@ -2723,7 +2738,7 @@ static int tune_ad_sharing(struct snd_ac97 *ac97)
{
unsigned short scfg;
if ((ac97->id & 0xffffff00) != 0x41445300) {
- snd_printk(KERN_ERR "ac97_quirk AD_SHARING is only for AD codecs\n");
+ ac97_err(ac97, "ac97_quirk AD_SHARING is only for AD codecs\n");
return -EINVAL;
}
/* Turn on OMS bit to route microphone to back panel */
@@ -2739,7 +2754,8 @@ AC97_SINGLE("Jack Detect", AC97_ALC650_CLOCK, 5, 1, 0);
static int tune_alc_jack(struct snd_ac97 *ac97)
{
if ((ac97->id & 0xffffff00) != 0x414c4700) {
- snd_printk(KERN_ERR "ac97_quirk ALC_JACK is only for Realtek codecs\n");
+ ac97_err(ac97,
+ "ac97_quirk ALC_JACK is only for Realtek codecs\n");
return -EINVAL;
}
snd_ac97_update_bits(ac97, 0x7a, 0x20, 0x20); /* select jack detect function */
@@ -2899,7 +2915,8 @@ int snd_ac97_tune_hardware(struct snd_ac97 *ac97, struct ac97_quirk *quirk, cons
if (override && strcmp(override, "-1") && strcmp(override, "default")) {
result = apply_quirk_str(ac97, override);
if (result < 0)
- snd_printk(KERN_ERR "applying quirk type %s failed (%d)\n", override, result);
+ ac97_err(ac97, "applying quirk type %s failed (%d)\n",
+ override, result);
return result;
}
@@ -2913,10 +2930,14 @@ int snd_ac97_tune_hardware(struct snd_ac97 *ac97, struct ac97_quirk *quirk, cons
quirk->subdevice == (quirk->mask & ac97->subsystem_device)) {
if (quirk->codec_id && quirk->codec_id != ac97->id)
continue;
- snd_printdd("ac97 quirk for %s (%04x:%04x)\n", quirk->name, ac97->subsystem_vendor, ac97->subsystem_device);
+ ac97_dbg(ac97, "ac97 quirk for %s (%04x:%04x)\n",
+ quirk->name, ac97->subsystem_vendor,
+ ac97->subsystem_device);
result = apply_quirk(ac97, quirk->type);
if (result < 0)
- snd_printk(KERN_ERR "applying quirk type %d for %s failed (%d)\n", quirk->type, quirk->name, result);
+ ac97_err(ac97,
+ "applying quirk type %d for %s failed (%d)\n",
+ quirk->type, quirk->name, result);
return result;
}
}
diff --git a/sound/pci/ac97/ac97_patch.c b/sound/pci/ac97/ac97_patch.c
index 66a3bc95fb84..991762215417 100644
--- a/sound/pci/ac97/ac97_patch.c
+++ b/sound/pci/ac97/ac97_patch.c
@@ -3477,7 +3477,8 @@ static int snd_ac97_add_vmaster(struct snd_ac97 *ac97, char *name,
sctl = snd_ac97_find_mixer_ctl(ac97, *s);
if (!sctl) {
- snd_printdd("Cannot find slave %s, skipped\n", *s);
+ dev_dbg(ac97->bus->card->dev,
+ "Cannot find slave %s, skipped\n", *s);
continue;
}
err = snd_ctl_add_slave(kctl, sctl);
diff --git a/sound/pci/ac97/ac97_pcm.c b/sound/pci/ac97/ac97_pcm.c
index eab0fc9ff2e0..d15297a68801 100644
--- a/sound/pci/ac97/ac97_pcm.c
+++ b/sound/pci/ac97/ac97_pcm.c
@@ -604,7 +604,9 @@ int snd_ac97_pcm_open(struct ac97_pcm *pcm, unsigned int rate,
}
if (!ok_flag) {
spin_unlock_irq(&pcm->bus->bus_lock);
- snd_printk(KERN_ERR "cannot find configuration for AC97 slot %i\n", i);
+ dev_err(bus->card->dev,
+ "cannot find configuration for AC97 slot %i\n",
+ i);
err = -EAGAIN;
goto error;
}
@@ -618,15 +620,20 @@ int snd_ac97_pcm_open(struct ac97_pcm *pcm, unsigned int rate,
if (pcm->r[r].rslots[cidx] & (1 << i)) {
reg = get_slot_reg(pcm, cidx, i, r);
if (reg == 0xff) {
- snd_printk(KERN_ERR "invalid AC97 slot %i?\n", i);
+ dev_err(bus->card->dev,
+ "invalid AC97 slot %i?\n", i);
continue;
}
if (reg_ok[cidx] & (1 << (reg - AC97_PCM_FRONT_DAC_RATE)))
continue;
- //printk(KERN_DEBUG "setting ac97 reg 0x%x to rate %d\n", reg, rate);
+ dev_dbg(bus->card->dev,
+ "setting ac97 reg 0x%x to rate %d\n",
+ reg, rate);
err = snd_ac97_set_rate(pcm->r[r].codec[cidx], reg, rate);
if (err < 0)
- snd_printk(KERN_ERR "error in snd_ac97_set_rate: cidx=%d, reg=0x%x, rate=%d, err=%d\n", cidx, reg, rate, err);
+ dev_err(bus->card->dev,
+ "error in snd_ac97_set_rate: cidx=%d, reg=0x%x, rate=%d, err=%d\n",
+ cidx, reg, rate, err);
else
reg_ok[cidx] |= (1 << (reg - AC97_PCM_FRONT_DAC_RATE));
}
--
1.9.0
More information about the Alsa-devel
mailing list