[alsa-devel] [PATCH] ASoC: cs42888: Add codec driver support
Lars-Peter Clausen
lars at metafoo.de
Mon Feb 24 18:54:09 CET 2014
Hi,
Couple of trivial things.
On 02/24/2014 07:55 AM, Nicolin Chen wrote:
[...]
> +config SND_SOC_CS42888
> + tristate "Cirrus Logic CS42888 CODEC"
> + depends on I2C
should select REGMAP_I2C
> +
[...]
> +#define CS42888_NUM_SUPPLIES 4
> +static const char *cs42888_supply_names[CS42888_NUM_SUPPLIES] = {
const char *const
> + "VA",
> + "VD",
> + "VLS",
> + "VLC",
> +};
> +
> +static const char *cs42888_adc_single[] = { "Differential", "Single-Ended" };
const char * const
> +static const char *cs42888_szc[] = { "Immediate Change", "Zero Cross",
> + "Soft Ramp", "Soft Ramp on Zero Cross" };
> +
const char * constr
> +static const struct soc_enum cs42888_enum[] = {
> + SOC_ENUM_SINGLE(CS42888_ADCCTL, 4, 2, cs42888_adc_single),
> + SOC_ENUM_SINGLE(CS42888_ADCCTL, 3, 2, cs42888_adc_single),
> + SOC_ENUM_SINGLE(CS42888_TXCTL, 5, 4, cs42888_szc),
> + SOC_ENUM_SINGLE(CS42888_TXCTL, 0, 4, cs42888_szc),
> +};
Usually it makes things a bit more clearer when you have a variable with a
unique name for each enum rather then putting them into one large array.
> +
[...]
> +static struct cs42888_ratios cs42888_ratios[] = {
const
[...]
> +static struct snd_soc_dai_ops cs42888_dai_ops = {
const
> + .set_fmt = cs42888_set_dai_fmt,
> + .set_sysclk = cs42888_set_dai_sysclk,
> + .hw_params = cs42888_hw_params,
> + .digital_mute = cs42888_digital_mute,
> +};
> +
[...]
> +
> +static struct reg_default cs42888_reg[] = {
const
[...]
> +
> +static struct snd_soc_codec_driver cs42888_driver = {
const
> + .probe = cs42888_probe,
> + .idle_bias_off = true,
> +
> + .controls = cs42888_snd_controls,
> + .num_controls = ARRAY_SIZE(cs42888_snd_controls),
> + .dapm_widgets = cs42888_dapm_widgets,
> + .num_dapm_widgets = ARRAY_SIZE(cs42888_dapm_widgets),
> + .dapm_routes = cs42888_dapm_routes,
> + .num_dapm_routes = ARRAY_SIZE(cs42888_dapm_routes),
> +};
> +
More information about the Alsa-devel
mailing list