[alsa-devel] [PATCH 3/6] ASoC: Intel: Add Haswell and Broadwell PCM platform driver

[Takashi Iwai]

At Thu, 20 Feb 2014 21:48:44 +0000,
Liam Girdwood wrote:
> +/* TLV used by both global and stream volumes */
> +static const DECLARE_TLV_DB_SCALE(hsw_vol_tlv, -9000, 300, 1);
> +
> +/* System Pin has no volume control */
> +static const struct snd_kcontrol_new hsw_volume_controls[] = {
> +	/* Global DSP volume */
> +	SOC_DOUBLE_EXT_TLV("Master Playback Volume", 0, 0, 8,
> +		ARRAY_SIZE(volume_map) -1, 0,
> +		hsw_volume_get, hsw_volume_put, hsw_vol_tlv),
> +	/* Offload 0 volume */
> +	SOC_DOUBLE_EXT_TLV("Media0 Playback Volume", 1, 0, 8,
> +		ARRAY_SIZE(volume_map), 0,
> +		hsw_stream_volume_get, hsw_stream_volume_put, hsw_vol_tlv),

Why -1 is for Master and not for others although they use the same
TLV?


> +/* Create DMA buffer page table for DSP */
> +static int create_adsp_page_table(struct hsw_priv_data *pdata,
> +	struct snd_soc_pcm_runtime *rtd,
> +	unsigned char *dma_area, size_t size, int pcm, int stream)
> +{
> +	int i, pages;
> +
> +	if (size % PAGE_SIZE)
> +		pages = (size / PAGE_SIZE) + 1;
> +	else
> +		pages = size / PAGE_SIZE;
> +
> +	dev_dbg(rtd->dev, "generating page table for %p size 0x%zu pages %d\n",
> +		dma_area, size, pages);
> +
> +	for (i = 0; i < pages; i++) {
> +		u32 idx = (((i << 2) + i)) >> 1;
> +		u32 pfn = (virt_to_phys(dma_area + i * PAGE_SIZE)) >> PAGE_SHIFT;

virt_to_phys() is bad, pretty unportable.  And, this implementation
doesn't use SG-buffer although the hardware can it obviously.

For managing SG-buffer, just use SNDRV_DMA_TPE_DEV_SG for
preallocation, and change the page setup code like:

	struct snd_dma_buffer *dmab = snd_pcm_get_dma_buf(substream)

	....
	pages = snd_sgbuf_aligned_pages(size);
	for (i = 0; i < pages; i++) {
		u32 idx = (((i << 2) + i)) >> 1;
		u32 pfn = snd_sgbuf_get_addr(dmab, i * PAGE_SIZE) >> PAGE_SHIFT;

The only other thing to change is to pass snd_pcm_sgbuf_ops_page to
snd_pcm_ops.page.  That's all.


Takashi