[alsa-devel] [PATCH v5 2/4] ASoC: tlv320aic32x4: Support for regulators

Markus Pargmann mpa at pengutronix.de
Mon Feb 17 11:04:18 CET 2014


Support regulators to power up the codec. This patch also enables the
AVDD LDO if no AV regulator was found.

Signed-off-by: Markus Pargmann <mpa at pengutronix.de>
---
 .../devicetree/bindings/sound/tlv320aic32x4.txt    |  8 +++
 sound/soc/codecs/tlv320aic32x4.c                   | 81 ++++++++++++++++++++++
 2 files changed, 89 insertions(+)

diff --git a/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt b/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt
index 352be7b..5e2741a 100644
--- a/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt
+++ b/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt
@@ -5,6 +5,14 @@ The tlv320aic32x4 serial control bus communicates through I2C protocols
 Required properties:
  - compatible: Should be "ti,tlv320aic32x4"
  - reg: I2C slave address
+ - supply-*: Required supply regulators are:
+    "iov" - digital IO power supply
+    "ldoin" - LDO power supply
+    "dv" - Digital core power supply
+    "av" - Analog core power supply
+    If you supply ldoin, dv and av are optional. Otherwise they are required
+   See regulator/regulator.txt for more information about the detailed binding
+   format.
 
 Optional properties:
  - reset-gpios: Reset-GPIO phandle with args as described in gpio/gpio.txt
diff --git a/sound/soc/codecs/tlv320aic32x4.c b/sound/soc/codecs/tlv320aic32x4.c
index d96cb7c..e4a7231 100644
--- a/sound/soc/codecs/tlv320aic32x4.c
+++ b/sound/soc/codecs/tlv320aic32x4.c
@@ -34,6 +34,7 @@
 #include <linux/cdev.h>
 #include <linux/slab.h>
 #include <linux/clk.h>
+#include <linux/regulator/consumer.h>
 
 #include <sound/tlv320aic32x4.h>
 #include <sound/core.h>
@@ -69,6 +70,11 @@ struct aic32x4_priv {
 	bool swapdacs;
 	int rstn_gpio;
 	struct clk *mclk;
+
+	struct regulator *supply_ldo;
+	struct regulator *supply_iov;
+	struct regulator *supply_dv;
+	struct regulator *supply_av;
 };
 
 /* 0dB min, 0.5dB steps */
@@ -699,6 +705,75 @@ static int aic32x4_parse_dt(struct aic32x4_priv *aic32x4,
 	return 0;
 }
 
+static int aic32x4_i2c_setup_regulators(struct device *dev,
+		struct aic32x4_priv *aic32x4)
+{
+	int ret = 0;
+
+	aic32x4->supply_ldo = devm_regulator_get_optional(dev, "ldoin");
+	aic32x4->supply_iov = devm_regulator_get(dev, "iov");
+	aic32x4->supply_dv = devm_regulator_get_optional(dev, "dv");
+	aic32x4->supply_av = devm_regulator_get_optional(dev, "av");
+
+	/* Check if the regulator requirements are fulfilled */
+
+	if (IS_ERR(aic32x4->supply_iov)) {
+		dev_err(dev, "Missing supply 'iov'\n");
+		ret = -EINVAL;
+	}
+
+	if (IS_ERR(aic32x4->supply_ldo)) {
+		if (IS_ERR(aic32x4->supply_dv)) {
+			dev_err(dev, "Missing supply 'dv' or 'ldoin'\n");
+			ret = -EINVAL;
+		}
+		if (IS_ERR(aic32x4->supply_av)) {
+			dev_err(dev, "Missing supply 'av' or 'ldoin'\n");
+			ret = -EINVAL;
+		}
+	}
+
+	if (ret)
+		return ret;
+
+	if (!IS_ERR(aic32x4->supply_ldo)) {
+		ret = regulator_enable(aic32x4->supply_ldo);
+		if (ret) {
+			printk("Failed to enable regulator ldo\n");
+			return ret;
+		}
+	}
+
+	if (!IS_ERR(aic32x4->supply_iov)) {
+		ret = regulator_enable(aic32x4->supply_iov);
+		if (ret) {
+			printk("Failed to enable regulator iov\n");
+			return ret;
+		}
+	}
+
+	if (!IS_ERR(aic32x4->supply_dv)) {
+		ret = regulator_enable(aic32x4->supply_dv);
+		if (ret) {
+			printk("Failed to enable regulator dv\n");
+			return ret;
+		}
+	}
+
+	if (!IS_ERR(aic32x4->supply_av)) {
+		ret = regulator_enable(aic32x4->supply_av);
+		if (ret) {
+			printk("Failed to enable regulator av\n");
+			return ret;
+		}
+	}
+
+	if (!IS_ERR(aic32x4->supply_ldo) && IS_ERR(aic32x4->supply_av))
+		aic32x4->power_cfg |= AIC32X4_PWR_AIC32X4_LDO_ENABLE;
+
+	return 0;
+}
+
 static int aic32x4_i2c_probe(struct i2c_client *i2c,
 			     const struct i2c_device_id *id)
 {
@@ -736,6 +811,12 @@ static int aic32x4_i2c_probe(struct i2c_client *i2c,
 		aic32x4->rstn_gpio = -1;
 	}
 
+	ret = aic32x4_i2c_setup_regulators(&i2c->dev, aic32x4);
+	if (ret) {
+		dev_err(&i2c->dev, "Failed to setup regulators\n");
+		return ret;
+	}
+
 	aic32x4->mclk = devm_clk_get(&i2c->dev, "mclk");
 	if (IS_ERR(aic32x4->mclk))
 		dev_info(&i2c->dev, "No mclk found, continuing without clock\n");
-- 
1.8.5.3



More information about the Alsa-devel mailing list