[alsa-devel] [PATCH v4 2/4] ASoC: tlv320aic32x4: Support for regulators
Markus Pargmann
mpa at pengutronix.de
Sun Feb 16 19:27:30 CET 2014
Support regulators to power up the codec. This patch also enables the
AVDD LDO if no AV regulator was found.
Signed-off-by: Markus Pargmann <mpa at pengutronix.de>
---
.../devicetree/bindings/sound/tlv320aic32x4.txt | 8 +++
sound/soc/codecs/tlv320aic32x4.c | 73 ++++++++++++++++++++++
2 files changed, 81 insertions(+)
diff --git a/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt b/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt
index 352be7b..5e2741a 100644
--- a/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt
+++ b/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt
@@ -5,6 +5,14 @@ The tlv320aic32x4 serial control bus communicates through I2C protocols
Required properties:
- compatible: Should be "ti,tlv320aic32x4"
- reg: I2C slave address
+ - supply-*: Required supply regulators are:
+ "iov" - digital IO power supply
+ "ldoin" - LDO power supply
+ "dv" - Digital core power supply
+ "av" - Analog core power supply
+ If you supply ldoin, dv and av are optional. Otherwise they are required
+ See regulator/regulator.txt for more information about the detailed binding
+ format.
Optional properties:
- reset-gpios: Reset-GPIO phandle with args as described in gpio/gpio.txt
diff --git a/sound/soc/codecs/tlv320aic32x4.c b/sound/soc/codecs/tlv320aic32x4.c
index d96cb7c..2196af6 100644
--- a/sound/soc/codecs/tlv320aic32x4.c
+++ b/sound/soc/codecs/tlv320aic32x4.c
@@ -34,6 +34,7 @@
#include <linux/cdev.h>
#include <linux/slab.h>
#include <linux/clk.h>
+#include <linux/regulator/consumer.h>
#include <sound/tlv320aic32x4.h>
#include <sound/core.h>
@@ -69,6 +70,11 @@ struct aic32x4_priv {
bool swapdacs;
int rstn_gpio;
struct clk *mclk;
+
+ struct regulator *supply_ldo;
+ struct regulator *supply_iov;
+ struct regulator *supply_dv;
+ struct regulator *supply_av;
};
/* 0dB min, 0.5dB steps */
@@ -699,6 +705,67 @@ static int aic32x4_parse_dt(struct aic32x4_priv *aic32x4,
return 0;
}
+static int aic32x4_i2c_setup_regulators(struct device *dev,
+ struct aic32x4_priv *aic32x4)
+{
+ int ret;
+
+ aic32x4->supply_ldo = devm_regulator_get_optional(dev, "ldoin");
+ aic32x4->supply_iov = devm_regulator_get(dev, "iov");
+ aic32x4->supply_dv = devm_regulator_get_optional(dev, "dv");
+ aic32x4->supply_av = devm_regulator_get_optional(dev, "av");
+
+ /* Check if the regulator requirements are fulfilled */
+
+ if (IS_ERR(aic32x4->supply_iov)) {
+ dev_err(dev, "Missing supply 'iov'\n");
+ ret = -EINVAL;
+ }
+
+ if (IS_ERR(aic32x4->supply_ldo)) {
+ if (IS_ERR(aic32x4->supply_dv)) {
+ dev_err(dev, "Missing supply 'dv' or 'ldoin'\n");
+ ret = -EINVAL;
+ }
+ if (IS_ERR(aic32x4->supply_av)) {
+ dev_err(dev, "Missing supply 'av' or 'ldoin'\n");
+ ret = -EINVAL;
+ }
+ }
+
+ if (ret)
+ return ret;
+
+ if (!IS_ERR(aic32x4->supply_ldo)) {
+ ret = regulator_enable(aic32x4->supply_ldo);
+ if (ret)
+ return ret;
+ }
+
+ if (!IS_ERR(aic32x4->supply_iov)) {
+ ret = regulator_enable(aic32x4->supply_iov);
+ if (ret)
+ return ret;
+ }
+
+ if (!IS_ERR(aic32x4->supply_dv)) {
+ ret = regulator_enable(aic32x4->supply_dv);
+ if (ret)
+ return ret;
+ }
+
+ if (!IS_ERR(aic32x4->supply_av)) {
+ ret = regulator_enable(aic32x4->supply_av);
+ if (ret)
+ return ret;
+ }
+
+ if (!IS_ERR(aic32x4->supply_ldo) && IS_ERR(aic32x4->supply_av))
+ aic32x4->power_cfg |= AIC32X4_PWR_AIC32X4_LDO_ENABLE;
+
+ return 0;
+}
+
static int aic32x4_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
@@ -736,6 +803,12 @@ static int aic32x4_i2c_probe(struct i2c_client *i2c,
aic32x4->rstn_gpio = -1;
}
+ ret = aic32x4_i2c_setup_regulators(&i2c->dev, aic32x4);
+ if (ret) {
+ dev_err(&i2c->dev, "Failed to setup regulators\n");
+ return ret;
+ }
+
aic32x4->mclk = devm_clk_get(&i2c->dev, "mclk");
if (IS_ERR(aic32x4->mclk))
dev_info(&i2c->dev, "No mclk found, continuing without clock\n");
--
1.8.5.3
More information about the Alsa-devel
mailing list