[alsa-devel] [PATCH v3 2/5] ASoC: dwc: Iterate over all channels
Andrew Jackson
andrew.jackson at arm.com
Fri Dec 19 17:18:06 CET 2014
From: Andrew Jackson <Andrew.Jackson at arm.com>
The Designware core can be configured with up to four stereo channels.
Each stereo channel is individually configured so, when the driver's
hw_params call is made, each requested stereo channel has to be
programmed.
Signed-off-by: Andrew Jackson <Andrew.Jackson at arm.com>
---
sound/soc/dwc/designware_i2s.c | 35 ++++++++++++++++-------------------
1 files changed, 16 insertions(+), 19 deletions(-)
diff --git a/sound/soc/dwc/designware_i2s.c b/sound/soc/dwc/designware_i2s.c
index 5c13303..2ba1e2e 100644
--- a/sound/soc/dwc/designware_i2s.c
+++ b/sound/soc/dwc/designware_i2s.c
@@ -209,16 +209,9 @@ static int dw_i2s_hw_params(struct snd_pcm_substream *substream,
switch (config->chan_nr) {
case EIGHT_CHANNEL_SUPPORT:
- ch_reg = 3;
- break;
case SIX_CHANNEL_SUPPORT:
- ch_reg = 2;
- break;
case FOUR_CHANNEL_SUPPORT:
- ch_reg = 1;
- break;
case TWO_CHANNEL_SUPPORT:
- ch_reg = 0;
break;
default:
dev_err(dev->dev, "channel not supported\n");
@@ -227,18 +220,22 @@ static int dw_i2s_hw_params(struct snd_pcm_substream *substream,
i2s_disable_channels(dev, substream->stream);
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
- i2s_write_reg(dev->i2s_base, TCR(ch_reg), xfer_resolution);
- i2s_write_reg(dev->i2s_base, TFCR(ch_reg), 0x02);
- irq = i2s_read_reg(dev->i2s_base, IMR(ch_reg));
- i2s_write_reg(dev->i2s_base, IMR(ch_reg), irq & ~0x30);
- i2s_write_reg(dev->i2s_base, TER(ch_reg), 1);
- } else {
- i2s_write_reg(dev->i2s_base, RCR(ch_reg), xfer_resolution);
- i2s_write_reg(dev->i2s_base, RFCR(ch_reg), 0x07);
- irq = i2s_read_reg(dev->i2s_base, IMR(ch_reg));
- i2s_write_reg(dev->i2s_base, IMR(ch_reg), irq & ~0x03);
- i2s_write_reg(dev->i2s_base, RER(ch_reg), 1);
+ for (ch_reg = 0; ch_reg < (config->chan_nr / 2); ch_reg++) {
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ i2s_write_reg(dev->i2s_base, TCR(ch_reg),
+ xfer_resolution);
+ i2s_write_reg(dev->i2s_base, TFCR(ch_reg), 0x02);
+ irq = i2s_read_reg(dev->i2s_base, IMR(ch_reg));
+ i2s_write_reg(dev->i2s_base, IMR(ch_reg), irq & ~0x30);
+ i2s_write_reg(dev->i2s_base, TER(ch_reg), 1);
+ } else {
+ i2s_write_reg(dev->i2s_base, RCR(ch_reg),
+ xfer_resolution);
+ i2s_write_reg(dev->i2s_base, RFCR(ch_reg), 0x07);
+ irq = i2s_read_reg(dev->i2s_base, IMR(ch_reg));
+ i2s_write_reg(dev->i2s_base, IMR(ch_reg), irq & ~0x03);
+ i2s_write_reg(dev->i2s_base, RER(ch_reg), 1);
+ }
}
i2s_write_reg(dev->i2s_base, CCR, ccr);
--
1.7.1
More information about the Alsa-devel
mailing list