[alsa-devel] [PATCH] ASoC: pcm512x: Trigger auto-increment of register addresses on i2c
Peter Rosin
peda at lysator.liu.se
Mon Dec 8 16:33:11 CET 2014
From: Peter Rosin <peda at axentia.se>
When the codec is connected using i2c, it will only auto-increment
register addresses if msb (0x80) of the register address byte is set.
Signed-off-by: Peter Rosin <peda at axentia.se>
---
sound/soc/codecs/pcm512x-i2c.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/sound/soc/codecs/pcm512x-i2c.c b/sound/soc/codecs/pcm512x-i2c.c
index 4d62230bd378..d0547fa275fc 100644
--- a/sound/soc/codecs/pcm512x-i2c.c
+++ b/sound/soc/codecs/pcm512x-i2c.c
@@ -24,8 +24,13 @@ static int pcm512x_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct regmap *regmap;
+ struct regmap_config config = pcm512x_regmap;
- regmap = devm_regmap_init_i2c(i2c, &pcm512x_regmap);
+ /* msb needs to be set to enable auto-increment of addresses */
+ config.read_flag_mask = 0x80;
+ config.write_flag_mask = 0x80;
+
+ regmap = devm_regmap_init_i2c(i2c, &config);
if (IS_ERR(regmap))
return PTR_ERR(regmap);
--
1.7.10.4
More information about the Alsa-devel
mailing list